REPAIR REPLACEMENT OF SECURITY LIGHT CONTROL GEAR SWITCHGEAR AND CABLE AT MIL STN GANDHINAGAR

Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested,poles, stays , struts have been erected and tested all as specified and directed.

Removing excavated surplus soil (Soft/hard soil) obtained from excavation to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Supply and laying sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm deep over the cable all as specified.

Sub class 'B' as per readily available in market size not less than( 102.5x215x65 mm) well burnt brick laid flate in trenches as protection to LT cable complete all as specified and as directed.

Material and labour for Taking out any type light fittings complete all as specified and directed

Labour only for laying sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm deep over the cable all as specified.

Labour only for laying old bricks /un-reinforced precast concrete cable cover,any size and type retrieved from ser no.1 complete all as specified and directed.

Labour only for refixing any type light fittings ny size and type retrieved from ser no.1 complete all as specified and directed

Material and labour for Taking out LT cable, after taking electrical shutdown complete f cable XLPE Insulated , galvanized steel strip or wire armoured,heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 4 Core x 16 Sqmm complete all as specified and directed.

Material and labour for Taking out LT cable, after taking electrical shutdown complete f cable XLPE Insulated , galvanized steel strip or wire armoured,heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 4 Core x 10 Sqmm complete all as specified and directed.

Material and labour for Taking out LT cable, after taking electrical shutdown complete f cable XLPE Insulated , galvanized steel strip or wire armoured,heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 2 Core x 10 Sqmm complete all as specified and directed.

Material and labour for Taking out LT cable, after taking electrical shutdown complete f cable XLPE Insulated , galvanized steel strip or wire armoured,heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 2 Core x 6 Sqmm complete all as specified and directed.

Material and labour for Taking out LT cable, after taking electrical shutdown complete f cable XLPE Insulated , galvanized steel strip or wire armoured,heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 2 Core x 4 Sqmm complete all as specified and directed.

Material and labour for Repair/ replacement of LT cable, laying and testing of cable XLPE Insulated , galvanized steel strip or wire armoured,heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 4 Core x 16 Sqmm complete all as specified and directed.

Material and labour for Repair/ replacement of LT cable, laying and testing of cable XLPE Insulated , galvanized steel strip or wire armoured,heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 4 Core x 10 Sqmm complete all as specified and directed.

Material and labour for Repair/ replacement of LT cable, laying and testing of cable XLPE Insulated , galvanized steel strip or wire armoured,heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 2 Core x 10 Sqmm complete all as specified and directed.

Material and labour for Repair/ replacement of LT cable, laying and testing of cable XLPE Insulated , galvanized steel strip or wire armoured,heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 2 Core x 6 Sqmm complete all as specified and directed.

Material and labour for Repair/ replacement of LT cable, laying and testing of cable XLPE Insulated , galvanized steel strip or wire armoured,heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 2 Core x 4 Sqmm complete all as specified and directed.

Labour only for Repair/ replacement of LT cable, laying and testing of cable XLPE Insulated, galvanized steel strip or wire armoured, heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 4 Core x 16 Sqmm complete all as specified and directed.

Labour only for Repair/ replacement of LT cable, laying and testing of cable XLPE Insulated, galvanized steel strip or wire armoured, heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 4 Core x 10 Sqmm complete all as specified and directed.

Labour only for Repair/ replacement of LT cable, laying and testing of cable XLPE Insulated, galvanized steel strip or wire armoured, heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 2 Core x 10 Sqmm complete all as specified and directed.

Labour only for Repair/ replacement of LT cable, laying and testing of cable XLPE Insulated, galvanized steel strip or wire armoured, heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 2 Core x 6 Sqmm complete all as specified and directed.

Labour only for Repair/ replacement of LT cable, laying and testing of cable XLPE Insulated, galvanized steel strip or wire armoured, heavy duty LT electric power cables 1100 Volts grade with stranded aluminium conductor of size 2 Core x 4 Sqmm complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to using galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed by Engr-in-charge

M&L for horizontal drilling, in any type of soil, using trenchless technology suitable for insertion of GI pipe /Medium Grade PVC and LT cables along the pipe complete all as specified and directed of50 MM DIA GI PIPE.

Material and Labour for Double Compression cable Gland weatherproof suitable for cable 10 to16 Sqmm all as spd and directed

S&F GI tubing light grade galvanised /Medium Grade PVC with all fittings like Bend Elbow Tee etc & fixed complete wall/pole for 40mm bore complete all as specified and directed.

S&F GI tubing light grade galvanised /Medium Grade PVC with all fittings & fixed complete wall/pole for 50 mm bore complete all as specified and directed.

Supply, installation, commissioning and testing, in repair, Time switch panel , LT (415 Volts, 50 Hz , 3-phase, 4 wire supply),CPRI approved, plinth mounted, factory made, outdoor type of size (1500 x600 x 1000) mm weather and vermin proof (Protection Class IP-54) made out of 50mm x 50mm x 5mm angle iron frame and 3.15 mm thick MS Sheet CRCA sheet powder coated with front & back hinged opening, rubber lining, locking arrangement, painted externally and internally with two coats of synthetic enamel gray paint (First Quality) over a coat of red oxide primer, grouting panel through angle iron, 0.2 mtr in ground and 0.5 mtr over the ground including excavation & earth work in any type of soil and PCC (1:3:6) type C-2 using 40mm graded stone aggregate complete comprising of the followings:- (a) Incoming supply:- (i) Mains incomer, 63 A, 25 kA, 4-pole MCCB with adjustable thermal-magnetic release - 01 No (ii) Indicating lamp Neon type for R-Y-B - 3 Nos (vi)Extended rotary handle & spreader terminals for above MCCB-01 Nos (vii) 6 A TP MCB-01 Nos MAIN BUSBAR SIZE- 25 X 10 mm. EC grade aluminium busbars MAIN BUSBAR SIZE (For neutral)-25 X10 mm. EC grade aluminium busbars EARTHING BUS 25 x 10 mm. EC grade aluminium busbars PANEL MOUNTING-Floor mounted CABLE ENTRY-Bottom for both incoming and outgoing PANEL FABRICATION-From 11G CRCA sheet steel FINISHING-Powder coating (min. 80 micron) after 7-tank process to shade RAL-7035 PANEL DIMENSIONS- App. 750 mm. (H) X 700 mm. (W) X 450 mm. (D)

M&L for Repair of Cable By Insertion of Straight trought Joint Cold Shrink Type for LT Cable 10 Sq mm 2 Core with all accessories all as spd and directed

S&F, aluminum / Tinned lugs for cable size 2.5 to 16 sqmm complete all as specified and directed.

M/L for PCC (1:4:8) type D-2 using 40mm graded aggregate as in foundation/surface repair for pole / Platform etc complete all as specified and directed.

M/L for PCC (1:3:6) typeC-1 using 20mm graded aggregate as in foundation/surface repair for pole / Platform etc complete all as specified and directed.

S&F PVC insulated and PVC sheathed copper conductor cable of size 1.5 Sqmm, 3 core, 1100 volts grade, multistranded, passing throuth pipe, on pole/wall from juntion box to street light fitting complete all as specified and directed.

Supply and fixing in replacement LED Out door under Water Fountain Light Fittings complete IP-68 , 220 Volt Ac 50 Hz of RGB Colour 36 Watt (12 x 3 ) complete in all respect all as directed

Supply and fixing in replacement Tricolour LED Bollard / Column Light Fittings of 1 mtr Height suitable for 220 volt Ac 50 Hz Supply complete in all Respect all as directed.

Supply and fixing in replacemen LED Out door land scape Projection Flood Light Fitting complete IP-54 , 220 Volt Ac 50 Hz of RGB Colour 36/45 Watt (12/15 x 3 ) complete in all respect all as directed

Supply and fixing in replacement LED Out door land scape Projection Flood Light Fitting complete IP-54 , 220 Volt Ac 50 Hz of RGB Colour 60 Watt (20 x 3 ) complete in all respect all as directed

Supply and fixing in replacemen LED Out door Indoor games Flood Light Fitting complete IP-54 , 220 Volt Ac 50 Hz of 200 Watt complete in all respect all as directed

Supply and fixing in replacement LED street Light Fitting complete IP-54 , 220 Volt Ac 50 Hz of 60 Watt complete in all respect all as directed

Supply and fixing in replacement LED street Light Fitting complete IP-54 , 220 Volt Ac 50 Hz of 90 Watt complete in all respect all as directed

Supply and fixing in replacement LED street Light Fitting complete IP-54 , 220 Volt Ac 50 Hz of 120 Watt complete in all respect all as directed

Supply and fixing in replacement LED street Light Fitting complete IP-54 , 220 Volt Ac 50 Hz of 150 Watt complete in all respect all as directed

Supply and fixing in replacement corrosion resistant Decorative poles 3.5 mtr long for light fitting with appropriate size and type light fittings duly prewired complete in all Respect all as directed.

Supply and fixing in replacement LED Strip Light Fittings of 10 mtr Roll with Driver of Red,Orange,Green., Blue, Voilet,White, Golden , Silver, Pink Colour suitable for 220 volt Ac 50 Hz Supply complete in all Respect all as directed.

Supply and fixing in replacement LED Out door land scape Projection Flood Light Fitting complete IP-54 , 220 Volt Ac 50 Hz of 120 Watt complete in all respect all as directed

Supply and fixing in replacement LED Bollard Light Fittings of 9 watt suitable for 220 volt Ac 50 Hz Supply complete in all Respect all as directed.

M&L for repair of street light timers in GMS by replacement of warn out parts , like wires , lugs, time switch, contactor of 220 volt/ 415 volt Ac 50 Hz and make serviceable in all respect all as directed by engr in charge.

Please Enable Macros to View BoQ information