Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹7,900
Closing Date
4 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Office of the Deputy Conservator of Forest North Dang Forest Division Ahwa
New Construction of Watch Tower at Don Hill -PF.137 in Piplaidevi Range
366413
08/2026-27 (2nd Attempt)
Open
Civil Works
Works
Dang
10 documents required · 9 mandatory · 1 optional
₹900
Deputy Conservator of Forests, North Dang Division, Ahwa
₹7,900
19 Nov 2026
19 Nov 2026
19 Nov 2026
4 Dec 2026
19 Nov 2026
90 days
Description of Item Quantuty Unit Rate Total Amount
I II III IV V VI
Clearing and grubbing road land including uprooting rank vegetation grass
bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut
1 0.01 Hectare 28,455.09
earlier and disposal of unserviceable materials (C) By mechanical means in area of
light jungle
Excavation for foundation for depth from up to 1.5 M. m including sorting out
and stacking of useful materials and disposing off the excavated stuff up to
2 50 Meter lead.(B) Dense & Hard Soil, etc. complete as per detailed & directed 24.20 Cmt 160.89
Filling available excavated earth (excluding rock) in trenches. plinth,
sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating
3 each disposited layer by ramming and watering. 17.00 Cmt 137.47
Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6-
4 Graded brick bat aggregate 40mm normal size) and curing complete excluding cost 3.70 Cmt 3,080.07
of formwork in (A) Foundation and Plinth
GRADE SLAB (M200) : Providing and laying controlled cement concrete M.200
Concrete with all lead, including all transportation, pumping, pouring, curing of
5 concrete etc complete including the cost of formwork but excluding the cost of 2.05 Cmt 4,926.17
reinforcement for reinforced concrete work in M200 Grade Slab
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing centering
& shuttering in true line and level etc, but excluding the cost of reinforcement for
6 RCC work in TIE, GROUND, & PLINTH BEAMS for any type of cross sectional 2.05 Cmt 6,539.04
area. etc., complete as directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing centering
& shuttering in true line and level etc, but excluding the cost of reinforcement for
7 RCC work in SLAB BEAMS for Ground floor & Super structure, & for any type of 2.05 Cmt. 6,892.44
cross sectional area. etc., complete as directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing centering
& shuttering in true line and level etc, but excluding the cost of reinforcement for
8 RCC work in SLAB BEAMS for First floor & Super structure, & for any type of 1.05 Cmt. 6,934.22
cross sectional area. etc., complete as directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing centering
& shuttering in true line and level etc, but excluding the cost of reinforcement for
9 RCC work at Plinth to Ground FLOOR SLAB for all thickness/cross section etc. 3.05 Cmt. 6,731.25
complete as directed by E. I. C.
Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded
stone aggregates 20 mm nominal size) for reinforced concrete Chhajjas upto floor
two level including finishing the exposed surfaces with cement mortar 1:3 (1-
10 cement, 3 Fine sand) to give a smooth and even surface centering and formwork 2.05 Cmt. 6,712.10
and curing complete excluding cost of reinforcement.
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,
binding and placing in position complete upto ground floor level
Schedule B
Description of Item Quantuty Unit Rate Total Amount
Description of Item Quantuty Unit Rate Total Amount
Brick work using common burnt clay building bricks having crushing strength not
less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6. (1- Cement
: 6 -fine sand)(B) Conventional
Brick work using common burnt clay building bricks having crushing strength not
less than 35 kg./Sq.Cm. at Ground floor Lvl. in cement Mortar 1:6 (1-Cement :6-
finesand) (B) Conventional For Ground Floor etc. Complete.
Brick work using common burnt clay building bricks having crushing strength not
less than 35 kg./Sq.Cm. at First floor Lvl. in cement Mortar 1:6 (1-Cement :6-
finesand) (B) Conventional For First Floor etc. Complete.
Providing & Fixing chicken mesh jali at R.C.C. masonry joints at any height with
all labour & material, etc. Complete, as per detailed & directed by EIC.
Providing 15mm thick cement plaster in single coat on Rough (Similar)side of
single or half brick walls for interior plastering upto floor two level and finished
even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)
Providing 15mm thick cement plaster in single coat on Rough (Similar)side of
single or half brick walls for interior plastering for First floor level and finished
even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)
Providing 10mm thick cement plaster in single coat on brick/concrete walls for
interior plastering for Ground Floor level and finished even and smooth in (ii)
Cement mortar 1:4 (1- cement :4-sand)
Providing 20 mm thick double coat mala cement plaster on interior brick / concrete
work for plastering comprising of base coat of 12 mm thick cement plaster in
cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top
19 coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel 118.10 Smt 290.72
scaffolding curing etc. complete.
Providing and laying polished Kota stone slab flooring\over 20mm (Average) thick
base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty
:1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with
20 pigment to match the shade of slab including rubbing and polishing etc. complete. 41.10 Smt 1,019.39
25mm thick
Schedule B
Description of Item Quantuty Unit Rate Total Amount
Description of Item Quantuty Unit Rate Total Amount
Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting
Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand)
and jointed with gray cement slury mixed with pigment to match the shade of slab
21 including rubbing 3.90 Smt 1,173.09
and polishing etc. complete.
Providing and fixing Min. 0.60 meter wide sandwich type platform including
supplying and fixing granite stone 18 mm thick mirror polished stones in top and
side position and vertical strip at front over 25 mm thick polished kota stone
22 platform fixing in top and sides and intermediates supports fixing with cement 1.50 Smt 6,936.63
mortar and adhesive and finishing including making recess for Kitchen/ Laboratory
sink etc. complete as approved and directed by Consultant / EIC.
Providing and fixing 35 mm thick ISI marked flush door shutters conforming to IS
: 2202 (Part I) decorative type, core of block board construction with frame of 1st
class hard wood, with 1mm. thk, ISI marked designed laminate in any finish on
23 both faces of shutters., slit openings with bidding Patti & 6mm thk designed acid 5.70 Smt 3,946.42
wash glass,. Stainless Steel butt hinges [125x65x2.5mm. IS1281712] with
necessary screws, using branded S.S. matt /glossy / platinum finished accessories,
Colour / polishing all bidding parts, and also incl. with all Material, labour, tools,
tolerance,
Providing scaffolding
and fixing etc.
35 complete
mm thickasshutters
per concept
for /direction and approved
Doors, windows by
and clerestory
windows including Indian teak wood frames 10 cm x 7 cm. size including anodized
alluminium fixtures and fastenings including primer coat of approved quality and
24 two coats of oil painting etc, complete. (i) Fully Glazed. 6.50 Smt 4,641.01
Steel work, welded in built up sections framed work including cutting, hoisting,
fixing in position and applying a priming coat of red lead paint. (A)In beams and
joists, channels angles Tees, flats, with connecting plates or angle cleats as in main
25 and cross beams. Hip and jack rafters, purlins conneted to common rafters and 1533.50 Kg 91.08
Providing & Fixing M.S. grills of required pattern to wooden frames of windows,
RCC or as specified in drawings etc. with M.S. flats at required spacing & frame
around, square or round bars with round headed bolts & nuts or by screws (A)
26 Plain Grill, as per detailed & directed by EIC. 97.50 Kg 119.89
Finishing wall with Weather proof exterior emulsion paint on wall surface (two
coats) to give an required shape even shade after thoroughly brushing the surface to
remove all dirt, and remains of loose powdered materials.etc complete.
Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of primer at
Wall painting (two coats) with plastic emulsion paint of approved brand &
manufacture on undecorated wall surfaces to give an even shade including
28 thoroughly brushing the surface free from mortar droppings & other foreign matter 93.20 Smt 125.94
& sand papered smooth, as per detailed & directed by EIC.
Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of primer at
Ceiling painting (Two coats) with plastic emulsion paint of approved brand and
manufacture on undecorated Ceiling surface to give an even shade including
29 thoroughly brushing the surface free from mortar droppings and other foreign 20.30 Smt 131.75
matter and sand papered smooth, as per detailed & directed by EIC.
Schedule B
Description of Item Quantuty Unit Rate Total Amount
Description of Item Quantuty Unit Rate Total Amount
Painting two coats (including priming coat) on new steel and other metal surface
with enamel paint, brushing, interior to give an even shade including cleaning the
surface an even shade including cleanicn the surface of all dirt, dust and other
30 foreign matter. 58.60 Smt 131.86
Providing and fixing roof panel shall be made out of 0.5 mm thick pre coated GI
sheet . The Precoated sheet shall be of minimum 240 mpa steel grade confirming to
IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per
31 IS:277:1992 , 5-7 microns epoxy primer on both side of the sheet and polyester top 35.70 Smt 867.39
coat 15-18 micron. The PPGI Sheet shall have plastic protective guard film of
minimum 25 microns to avoid scratches during transportation. The ridge shall be
fixed to the steel members by pop rivet or self drilling/self stitching fastners @
maximum laying
Providing 450 mm andc/cjointing
along length
in trueofline
capping/flashing
and level 15mmetcdia.
complete . Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two metre C/C or shall be
32 concealed as directed including necessary fittings etc. including testing of pipe and 10.00 Rmt. 72.65
joints and fixing the same with adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two metre C/C or shall be
33 concealed as directed including necessary fittings etc. including testing of pipe and 10.00 Rmt. 91.84
joints and fixing the same with adhesive solvent, including cost of all materials.
Providing & Fixing pillar tap, screw down high pressure with screws, shanks &
back nuts. (i) 15mm dia.
Providing & Fixing brass screw down stop tap. (A) 15mm dia.
Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets, painted
white including cutting holes in walls and making good the same but excluding
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm
(Green) both are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular
type switch / bell push & accessories and earth continuity of following type,
37 erected on PVC / Metallic/Wooden box, single mounting base frame covered with 3.00 Pt. 582.77
textured/metallic/white front plate modules erected on / in wall / ceiling as per
pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling completeCat. III
Schedule B
Description of Item Quantuty Unit Rate Total Amount
Description of Item Quantuty Unit Rate Total Amount
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both
are of .ISI marked 1.1 kV Grade FRLS PVC insulated multi strand copper wires up
to 10 mtr length, in below type of pipe erected with 6A Modular type switch and
hum free EME step type electronic fan regulator mounted and accessories with
earth continuity of following type erected on PVC / Metallic/Wooden box, single
mounting base frame covered with textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /
H.D.Connector as directed.(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling completeCat. III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are
of ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper wires up to
10 mtr length, in below type of pipe erected complete with Modular type switch &
5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front
39 plate modules erected on / in wall / ceiling as per pipe erected with following type 1.00 Pt. 612.06
of accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from
nearby switchboard/mcb db board(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling completeCat. III
Providing following type of Modular Type Accessories mounted with PVC /
metallic/Wooden box, single mounting base frame covered with textured /
40 metallic/white front plate , modules erected with necessary connections as per site 1.00 Ea. 160.59
situation directed by Engineer In charge.(3) Two Pin/RJ-11 Telephone Socket, [A]
For One Gang, Cat.III
41 (9) 16 Amp. SP one way switch , Cat.III 1.00 Ea. 180.79
42 (10) 6/16Amp. Universal socket, Cat.III 1.00 Ea. 199.98
Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in following type of pipe to be erected concealed
in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated
stranded wire of green colour for earth continuity of following size, (A) With
medium class Rigid PVC pipe and accessories , (b) 2 wire 2.5 sq. mm
Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in following type of pipe to be erected in / on wall
44 / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of 10.00 Mtr. 140.39
green colour for earth continuity of following size, (A) with medium class Rigid
PVC pipe and accessories, (a) 2 wire 4 sq. mm
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to
Watt assembled on single MCPCB, with housing used as a heat sink shall be made
of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder
coated and high U.V. & corrosion resistance with diffuser with company
mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%, CCT
45 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED LED driver efficiency > 85 3.00 Ea. 373.70
% ( fitting required LM-79 & LM-80 Certificates) (NOTE: Below description have
shown ranges of Wattage capacity of LED fittings.The Engineer incharge may
integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet, Cat.III
Supplying and erecting led lamps with following wattage capacity of 220 to
voltage, minimum 15000 burning hours life, 500 V in built-surge
46 protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp 1.00 Ea. 112.11
holders, pf >= 0.5, (A) LED Lamps integral type, with PC diffuser suitable LAMP
holder, (ii) 5 to 8 watts, Cat-III
Providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and
47 having breaking capacity 10 KA to be erected in existing box. confirming to IS 1.00 Ea. 297.95
8828/1996 with ISI Mark , Cat-III
Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to
48 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected 1.00 Ea. 123.22
in existing box. confirming to IS 8828/1996 with ISI Mark, Cat-III
Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C
49 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 1.00 Ea. 811.03
having following capacity (c)63 Amp. Cat-III
Schedule B
Description of Item Quantuty Unit Rate Total Amount
Description of Item Quantuty Unit Rate Total Amount
Providing and erecting Sheet Steel powder coated MCB distribution board - flush /
surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms
to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of
MCBs.(The DBs should be used of same company of MCB to be used) suitable for,
(A) single phase incoming and horizontal single phase outgoing, (a) single door (IP-
51 Providing and erecting Annealed bare Copper wire 4.064mm to 1.626mm. 1.00 Kg. 794.87
Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia.
52 galvanised iron pipe with coupling and buch buried in specially prepared earth pit 1.00 Ea. 368.65
complete with necessary 8 SWG earth wire.
53 For using salt and charcoal / coke as required for pipe type earthing. 1.00 Ea. 171.70
54 For using salt and charcoal / coke as required for pipe type earthing. 5.00 Mtr. 112.11
Providing and erecting Approved make Ceiling fan with double ball bearing ISI
mark with condenser A.C. 230V.50 Hz.1200 mm. sweep complete, canopy erected
on existing hook or clamp with earthing. [Make shall be approved by Engineer in
Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down
56 rod erected duly painted for fan complete with proper insulation without leakage 2.00 Mtr. 108.07
and earthing.
Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC
bars up to 50mm length each side and pierced through a 16 Gauge M.S. box /
Heavy Duty PVC box complete erected concealed in Ceiling with necessary
finishing.
Total Amount Rs. =
Total Amount Rs. =
All works shall be carried out as per Public Works Department Handbook and other specifications of the Division or as
All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the
2 contractor under his signature
Rates quoted include clearance of site (Prior commencement of work and at its close) in all respects and hold good for work under
all conditions, site moisture, weather etc.
4 To be continued on additional sheets, If found necessary
I/We am/are willing to carry out the work @............ % above/below percent ( should be written in figures & Words) of
the estimated rates mentoined above . Amount of my/our tender work out as under .
Estimated amount put to tender Estimated amount put to tender
Deduct:……………………...….% below Add……………………..……..% above
IN words IN words
Signature of Contractor with Seal Deputy Conservator of Forest North Dang Division Ahwa
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Specification Index Don Hill Watch Tower.pdf
Detailed Specification Civil Don Hill Watch Tower.pdf
General Technical Specifications For BUILDING WORKS Book.pdf
R and B Specifications Booklet Electrical.pdf
Watchtower Design.pdf
Schedule-B (Don Hill Watch Tower -Piplaidevi Range.pdf
SBD For Watch Tower at Don Hill 2nd Attempt.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .