Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.9 LAccepted-AOC | ₹30.9 L | L1 | Accepted-AOC ok |
| Sl No | Description | Qty | Unit | jarnailsinghcontractor L1 |
|---|---|---|---|---|
| 1.00 | Supply, Erection and Commissioning of solid shaft Motor of capacity 40 HP, 1440 rpm, 3 Phase, 380 Volt 15%, with eficiency class IE2 suitable for fitment with 5 Cs. V.T axial/mix flow pump type vertical flange mounted as per approved specifications of the department. | 1 | No. | 3,35,000 ₹3,35,000 Lowest |
| 2.00 | Supply, Erection and Commissioning of 5 C/s axial/Mix Flow Water lubricated Vertical Flood Pumps of 5 Cs. Discharge at 1440 RPM at static head of approx 6.0 Mtr. having adjustable height, including strainer, MS Bend i/c flange welding, SS Nut and Bolts etc complete in all respect as per site requirement with epoxy coating and as per approved specifications of the department | 1 | No. | 8,85,000 ₹8,85,000 Lowest |
| 3.00 | Supply, Erection and Commissioning of fully automatic Starter with ATS of cap. 150 Amp MCCB, suitable Contactors, auto phase corrector, micro controller based protection relays CTs with all allied accessories with 1 no MCB for lighting load, outgoing indicator, having MPR and all types of protections UV/OV/ over current, phase loss/phase imbalance/phase reversal protection, locked rotor, dry run etc, Digital meters, Push buttons, bus bars, capacitor bank, Seperate auto ON/OFF switch, seperate relay for single Phase otection etc. complete in all respect with double door frame suitable for open fields operation of 1 No. Motor of capacity of 40 HP with a stand of MS channel with canopy having suitable operating height above the kachha/Pakka floor (i/c suitable size PVC 3 Phase submersible copper wire 20 mtr from starter to motor and 25 Mtr for starter`s incomer side) as per approved specifications of the department. (suitable for voltage range 380 plus 15%,) | 1 | No. | 3,50,000 ₹3,50,000 Lowest |
| 4.00 | NS Item -Supply, Erection and Commissioning of M.S delivery Pipe 258.9 mm inner dia.(in approx 6 Mtr. per pipe) and each pipe of 8mm thickness both end welded with flange made of MS Plate as per approved specification and make (Including HT Nut and Bolt, Rubber sheet 1/8` and other fitment accessory required (Various Sites)). | 5 | Metre | 12,500 ₹62,500 Lowest |
Tender Value
₹29.4 L
EMD Value
₹58,900
Closing Date
24 Mar 2026, 9:00 amClosed
RAHIL
W.S.Divn.Jagadhari
DEWATERING OF FLOOD WATER OF VILLAGE SARAWAN BY CONSTRUCTING PUMPHOUSE IN VILLAGE SARAWAN.
2026_HRY_508575_1
2026F8D2DA1C 5241 4B1E 99AD F0E4B5E9322A173IRR
Open Tender
Civil Works
Works
90 days
SARAWAN
DEWATERING OF FLOOD WATER OF VILLAGE SARAWAN BY CONSTRUCTING PUMPHOUSE IN VILLAGE SARAWAN.
3 documents required · 3 mandatory
₹2,500
₹58,900
Yes
15 Apr 2026
18 Mar 2026
24 Mar 2026
18 Mar 2026
24 Mar 2026
18 Mar 2026
18 Mar 2026 - 24 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, Erection and Commissioning of solid shaft Motor of capacity 40 HP, 1440 rpm, 3 Phase, 380 Volt 15%, with eficiency class IE2 suitable for fitment with 5 Cs. V.T axial/mix flow pump type vertical flange mounted as per approved specifications of the department. | 1 | No. | - | - |
| 2 | Supply, Erection and Commissioning of 5 C/s axial/Mix Flow Water lubricated Vertical Flood Pumps of 5 Cs. Discharge at 1440 RPM at static head of approx 6.0 Mtr. having adjustable height, including strainer, MS Bend i/c flange welding, SS Nut and Bolts etc complete in all respect as per site requirement with epoxy coating and as per approved specifications of the department | 1 | No. | - | - |
| 3 | Supply, Erection and Commissioning of fully automatic Starter with ATS of cap. 150 Amp MCCB, suitable Contactors, auto phase corrector, micro controller based protection relays CTs with all allied accessories with 1 no MCB for lighting load, outgoing indicator, having MPR and all types of protections UV/OV/ over current, phase loss/phase imbalance/phase reversal protection, locked rotor, dry run etc, Digital meters, Push buttons, bus bars, capacitor bank, Seperate auto ON/OFF switch, seperate relay for single Phase otection etc. complete in all respect with double door frame suitable for open fields operation of 1 No. Motor of capacity of 40 HP with a stand of MS channel with canopy having suitable operating height above the kachha/Pakka floor (i/c suitable size PVC 3 Phase submersible copper wire 20 mtr from starter to motor and 25 Mtr for starter`s incomer side) as per approved specifications of the department. (suitable for voltage range 380 plus 15%,) | 1 | No. | - | - |
| 4 | NS Item -Supply, Erection and Commissioning of M.S delivery Pipe 258.9 mm inner dia.(in approx 6 Mtr. per pipe) and each pipe of 8mm thickness both end welded with flange made of MS Plate as per approved specification and make (Including HT Nut and Bolt, Rubber sheet 1/8` and other fitment accessory required (Various Sites)). | 5 | Metre | - | - |
stage.html
html • 0.04 MB
technical_587348.pdf
techsummary_587348.pdf
finance_587348.pdf
BOQ Comparative Chart
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.80 MB
BOQ_587348.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].