Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.9 LAccepted-AOC HOUSE NO 04 NEW SARASWATI VIHAR NEAR PAWAN VIHAR PHASE 6 OVER HEAD TANK BAREILLY 243006 UP | BAREILLY | BAREILLY | UP | 243006 | L1 | Accepted-AOC Being 1st Lowest | |
| 2 | L2₹23.9 L+₹4.9 L (25.9%)Rejected-Finance WARD NO 5 THIRIYA NIZAWAT KHAN BAREILLY 243123 UP | BAREILLY | BAREILLY | UTTAR PRADESH | 243123 | L2 | Rejected-Finance Being 2nd Lowest |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
17 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST BAREILLY
Garrison Engineer East Military Engineer Services Shahjahanpur Road Bareilly Cantt
PERIODICAL SERVICES AND CERTAIN REPAIRS TO MD ACCN, CHARGES, MES MD / OTM ACCN AT RTS AND DEPOT HEMPUR UNDER GE (E) BAREILLY.
2022_MES_544038_2
8214/E8
Open Tender
Civil Works
Item Rate
183 days
BAREILLY
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE EAST BAREILLY
₹50,000
Yes
29 Sept 2022
27 Aug 2022
19 Sept 2022
27 Aug 2022
17 Sept 2022
3 Sept 2022
27 Aug 2022 - 30 Aug 2022
Amount
M&L for complete removing of existing treatment of wall /ceiling by scrapping, preparation of old decorated plastered or unplastered surfaces of walls applying with approved Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour including minor repair of holes, cracks and plaster with cement mortar 1:2 where required, complete all as specified and directed.
M&L for one coat of acrylic water based exterior grade primer @ 0.9 ltr (undiluted) /10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent as approved by GE having an electric motor of minimum 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent quotes complete all as specified and directed. Note:- Make of primer and paint shall be same brand / manufacturer.
M&L for waterproof cement based putty on wall or ceiling @ 1 Kg (undiluted) per Sqm of average thickness 1 mm of Paints over the plastered / old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with approved Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sannding pad of 240 Grit or above having dia of 7"/ 9" to make the surface free from dust etc. by skilled labour. Step 1:- Mix the putty powder by adding 40-50% water and mix it with Approved Paints Trucare Putty mixer (Trucare Putty mixier with min 1400 W power havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2:- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Approved Paints Trucare Graco Spray Machine (Model: EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" Step 3:- Allow 6-8 hrs time to dry the putty surface complete all as specified and directed.
M&L applying two coats of exterior weather proof acrylic based anti-fungal paint (100% acrylic) smooth emulsion of approved colour with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer & Color stay Technology, Excellent Dirt Pick up Resistance of Asian Paints Ltd or its equivalent with low VOC less than 50, Anti Algal properties in two coats @ 1.79 ltr (undiluted) / 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.
M&L for one coat of acrylic waterbased interior grade primer on wall or ceiling @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subbsequent quotes.
M&L for applying two coats of oil bound distemper on wall or ceiling using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard echnology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited anpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
M&L preparation of old decorated surface (Plastered) unplastered of walls surface including brooming down or steel wire brushing steel, scrupping down smoke soot, mould, moss and efflorescent salt and trading oil and greasy spot and applying one coat of white lime wash complete all as specified and directed.
All as per Srl item No 7 here in before but one coat in ceiling
All as per Srl item No 7 here in before but applying one coat of colour wash
All as per Srl item No 7 here in before but one coat of cement base paint on old deorated surface
M&L for preparing including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & applying one coat of distemper oil emulsioncomplete all as specified and directed.
M&L prepration of old painted surface of wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
M&L for preparation of old steel surfaces of any description over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
M&L for writing building number one templet of any size and shape with white paint engraved on existing letter/ figure over a coat of painting with black paint including prepration of surfaces etc complete all as specified and directed
M&L for preparing of new surfaces of wall and applying three coat of white wash complete all as specified & directed.
All as per Srl item No 15 here in before but on ceiling
M&L two coats of cement based paint on newly plastered surface over a coat of chalk whiting including all preparation complete all as specified and directed.
M&L for applying two coat of distemper oil imulsion on newly plastered surface of walls including a coat of 1mm thick wall care putty (JK/Birla) including all preparation of surfaces complete all as specified and directed.
M&L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane including hacking out old broken glass (any thickness, size, quality or description) from steel frames complete all as specified.
S&F in repairs GI mild steel wire cloth 0.56mm nominal dia of wire average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staple in wooden / steel door / windows etc complete all as specified and as directed.
Taking down cement plaster on brick/stone wall etc including raking out joints/hacking for key scrubbing down with water etc including removal of rubbish to a distance n. exc. 50 mtr complete all as specified and as directed.
M&L for 15mm thick rendering in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement complete all as specified and directed.
M&L 5 mm thick plastering on ceiling in CM (1:3) even and smooth without using extra cement after applying of a coat of pidicrete mixed with cement. Note : - Dubbing of cement plater where reqd in two or three layer of 20 mm thick will be includued in the cost.
M & L for 15 mm thick rendering in two layers on fair faces of brick work or concrete surfaces first layers 10 mm thick with cement mortar 1:6 on fair faces of brick work or concrete surfaces and second layers 5 mm thick with cement mortar 1:4 with mixing of water proofing compound as per manufacturer’s instructions up to second floor height (appx 9mtr) complete all as specified and directed. Note:- Water Proofing compound shall be measured and paid separately.
Supply only integral water proofing compound complete all as specified.
Taking down chowkats or frames with shutters (without taking off shutter from the frame) area n exc 1.5 sqm complete all as specified and directed.
S&F factory made PVC door frame (Chowkhat) of the size 50 mm width, 47 mm height with a wall thickness of 5 mm made out of extruded 5 mm thick PVC sheet of density 600 Kg/Cum manufactured by an ISO-9001-2015 certified comany, having pattam width of 50 mm and thickness of 10 mm. All three frame lengths reinforced with 19 mm x 19 mm MS square tube of 19 gauge, mitre cut at two corners and joined with 2 Nos of 150 mm long brackets of 15 mm x 15 mm MS square tube or joint by fusion heat welding. The door frame shall be fixed to the wall using 8/100 mm long MS screws through the frame by using PVC fasteners. A minimum of 4 NOs of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc complete as per manufacturers specification and direction.
S&F 30 mm thick factory made moulded door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20 mm x 40 mm for stiles as well as top, bottom & lock rail. MS frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement/eynoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 Kg/Cbm manufactured by an ISO - 9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel 5mm plain / prelam PVC sheet to be pasted using solvent cement /eynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton (made by sticking 2 Nos foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 Nos) thick PVC sheet to be given for lock provision at lock height . Door to be fixed with frame with 3 Nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardwares should be fixed with 20 mm x 8 mm size steel screws etc complete as per direction, manufacturer's specification and drawing.
S & F for 200mm long berrel tower bolt aluminium anodised with staples and bolt of extruded section complete all as specified and directed.
S & F for 100mm long butt hinges extruded aluminium anodised complete all as specified and directed.
S & F 150mm long extruded aluminium anodised handle all as specified
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete as directed and specified.
M&L for virified ceramic dark shade/double charged/Ultra charged coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for virified ceramic dark shade/double charged/Ultra charged coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
S&F in repairs brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed. Model : Cat No FUS-29281 Fusion of Jaquar, model of Hindware Cat No F390022, Parryware Cat No G0217A1
S & F PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and as directed. (Cat Part No. 551 of Make Prayag or equivalent model approved by GE)
S&F in repair fancy type 15 mm bore brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB complete all as specified and directed. Model :ARI 39001B Aria of Jaquar ,Hindware Model No F280010 SCP, Cera Model No F2013451
M&L for Removing /cutting trees vegetation, digging out roots from concrete or brick wall filling holes on building (block of 1,2,3,4,8 or 12 qtrs) wall/roof/cajja /water tank staging area etc and making good with cement mortar 1:2:4 complete. Notes for all items (i) Any CI/AC/PVC pipe or pipes fittings damaged during the process of work shall be replaced by new one without any extra cost to the department. The decision of GE in this regard is final and binding. (ii) The debries including vegitation plant/trees shall be deposited off at a distance exc 0.5Km not exc 1.0 km all as directed by Engr-in-charge. (iii) For deciding the girth of plant/tree the heighest shall be taken as 30cm from roof/slab/chajja. (iv) The labour employed by the contractor for carrying out the above work will be provided safety equipment and quoted shall be deamed to include the same. (v) All windows, joineries, glass, fittings, doors etc shall covered before painting the surfaces and shall be cleaned including cleaning the floors as directed by the Engr-in-charge, failing which a recoveries shall be done from RAR decided by the GE and quoted rate is deemed inclusive this provisions.
RIYASAT ALI KHAN
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .