REPAIRS TO DRAIN FENCING BOUNDARY PILLAR COMPOUND WALL HARD STANDING AND PERIODICAL SERVICES AT OTM ACCN OF ZONE 1 AND ZONE 2 AT MIL STN DHRANGADHRA

Amount

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for framed work confirming to Fe 290 (Gde-E-165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., compelte drilled for fixing of steel sheeting or other covering. Doors, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floors for levelling course on existing cleaned surface etc for laying paver blocks, chequred tiles etc finished rough to receive floor finishes complete all as specified and directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement.

M&L for cement concrete 75mm thick type C-2 (1:3:6) using 40mm graded aggregate as in sub base to flooring and including demolition of existing concrete work complete all as specified and directed.

M&L for Chequered cement, concrete coloured tiles 30cm x 30cm x 20mm thick, with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 20mm thick screed bed in CM 1:6 complete alla s specified and directed.

Dismantling of interlocking paver block laid bedded and pointed in any mortar of any description or thickness in floor, aprons etc complete all as specified and directed.

M&L in repair to Granite (of any type/colour) work (table rubbed and polished) 10 to 20mm thick in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) including pointing in white cement (1)2( using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamgering of edges complete all as specified and directed.

M&L for 12 to 16mm thick machine cut pre-polished Udaipur green stone slab flooring on cooking platform/window cill, risers, treads laid over and including 15mm thick screed bed or beding layer in CM 1:6 and jointed with white cement mixed with pigment to match the shade of slab indluding rubbing and polishing, bull nose edging/moulding complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface as in skirting & dado, 7 to 8mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm over and including 10mm thick rendering in CM 1:4 set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed.

M&L for rubber moulded exterior grade joint less coloured tiles, 10mm thick, area exc 0.06 sqm but n.exc 0.18 sqm with grey cement and pigments set & jointed and pointed in neat cement slurry over and including 15mm thick cement screed bed in cm 1:6 with grey cement and pigments in floors including taking down old tile complete all as specified and directed.

M&L, for machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-40 grade complete all as specified and directed.

M&L for refixing of interlocking paver blocks with grey cement and pigment complete all as specified and directed.

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed by Engr-in-Charge.

Demoliton of precast cement concrete block walling, precast concrete articles etc complete.

M&L PCC (1:3:6) C-2 using 40mm graded stone aggregate as in mass concrete as in foundation filling and mass concrete all as completed as directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded aggregate as in post holes for embedding the post all as specified and directed. Note : PCC shall be filled in alternate post and corner post only upto depth of post holes and measured acordingly for payment.

M&L for providing precast cement concrete Kerb Stones factory made in repairs of type B1 1:2:4 (using 20mm graded crushed stone aggregate) 10 to 15 cm thick and setting in CM 1:6 including taking out existing broken stone with necessary excavation etc complete all as specified and directed.

M&L for Pre-cast cement concrete type C-1 (1:3:6) with 20 mm graded aggregate, block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed.

M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 except blocks, complete all as specified and directed .

M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover, shelves, chajjas etc and set in CM 1:6 complete all as specified and directed.

M&L for 25mm thick, precast cement concrete wall, louvres and jallies, (40 to 50mm thick) Type B-0 using 12.5mm graded stone aggregate as in louvers and jallies, (measured solid) including complete all as specified and directed.

M&L including fixing reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) in precast posts, fencing posts with groove to receive precast concrete wall straining or terminal posts, struts etc. for fencing, average sectional area exc 100 and n exc 250 sq cm, with or wittout chamferd angles and flat, splayed, rounded or mitred tops as directed and fixed.etc completd all as specified and directed.

S&F mild steel in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including one shop coat of red oxide, zinc chrome primer complete all as specified and directed.

Fixing only mild steel in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including one shop coat of red oxide, zinc chrome primer complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks ad similar work conforming to Fe 290, Gde-E-165.

Fixing only framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks ad similar work conforming to Fe 290, Gde-E-165 complete all as specified and directed.

Supply & fix mild steel screw bolts (machine made) with hexogonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexogonal or square nut, exc 5 cm bu tn.exc 10 cm long and 16-20 mm dia of neck complete all as specified and as directed complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

M&L for mild steel Round bars 10mm dia & over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed

Fixing only chain link MS galvanised fencing any size or type including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc, complete all as specified and directed.

S&F, in repair, galvanished, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm barvs dia barbs at 75mm spacinges and straining and fixing to any type of standard rails strining bolts including secuting or tying at crossinges with and provision of galvanished mild steel wire stapples or steel pins,etc complete all as directd and as specified

Supply only chain link MS galvanized fencing any size including line wire straining bolts etc. rails & binding wire complete all as specified and directed.

M & L for providing cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate, as in coping bed blocks including necessary form work complete all as specified and directed

M&L for Cement concrete 1:3:6 type C2 (40 mm graded aggregate) in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drainor channel 30 CM inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Add or deduct for each 25mm girth or part thereof over or under 30 cm as directed.

Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc.

M&L for raised pointing to randonm polygonal rubble, uncoursed or grought upto courses in CM 1:4 complete all as specified and directed.

M&L for 10 mm thick cement plaster in CM 1:3 on ceiling surfaces and finished the surface fair and even complete all as specified and directed.

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed.

M & L 15mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of concrete surfaces in cement mortar 1:4, including finishing the surface even and smooth complete all as specified and directed.

M&L for 15mm thick cement plaster on fair faces of birck work or concrete surfaces on wall in CM 1:6 finished the plaster surface fair and even complete all as specified and directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for rendering 15mm thick in two layers consisting of first layer 5mm in CM 1:6 and top layer 10mm thick in CM (1:4) plastering on stone masonry surface and rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed.

M&L for walling of random rubble stone masonry, brought up to courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M&L for walling of random rubble, except stone, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.

M&L for preparation of old (Previously treated) plastered or unplastered surfaces of walls by washing, rubbing down and stopping of distempered or painted surfaces of walls and applying a coat of oil emulsion distemper white or tinted including a layer of wall putty receiving smooth surface on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of Oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 1 mm) complete all as specified and directed.

M&L for preparation of old plastered or unplastered decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, mass and efflorescent salts and treating oil and greasy spots and applying a coat of cement base paint on walls including preparation of old painted uneven surface with putty as required etc complete all as specified and directed.

M&L for preparation of new plastered or un plastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified.

M&L for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified & directed.

M&L for preparing of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing, scraping down smoke soot, moulds, mass and efflorescent salt and treating oil and greasy spots and applying A coat of white wash on walls including cornices etc complete all as specified and directed.

M&L for two coats of exterior emulsion paint (weather coat ,anti dust of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty on newly plastered surface of wall complete all as specified and as directed.

M&L for two coats of exterior emulsion paint (weather coat of Berger or equivalent) over a coat of primer over a thin layer of external wall putty after complete removal of existing treatment complete all as specified and directed.

M&L for applying one coats of exterior emulsion paint (anti dust weather coat of Berger paint or eqivalent) on old treated wall surface incl preparation of old painted uneven surface with putty as required complete as specified and as directed.

M&L for applying two coats of exterior emulsion paint (anti dust weather coat of Berger paint or eqivalent) over a coat of primer on wall surface over and including 1 mm thick wall care putty to achive smooth surface on plastered surface or old suface after complete removal of existing treatement of wall complete all as specified and as directed.

M&L for preparation of old plastered or unplastered old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soots, treating oily/greasy spots, moss and efflorescence and applying a coat of white wash on ceiling including cornices etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

S&F in repairs 15mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms )complete all as specified and directed.

S&F in repairs 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms )complete all as specified and directed.

Supply & Fix in repair PVC cover for water storage tank of capacity exc 250 Ltr but n.exc. 500 Ltr complete all as spd and directed.

Supply & Fix in repair PVC cover for water storage tank of capacity exc 500 Ltr but n.exc. 1000 Ltr complete all as spd and directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole,laying of cables etc in Hard and dense soil and getting out complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layer not exc 25 cm in soft/distengrated rock complete all as specified and directed.

Excacation of post holes (or simllar holes) each n. exc 0.5cum, and getting out insoft/loose soil retuting and filling in and ramming earth of brokrn rubble mixes with earch around in layers not exceeding 25 cm, watering, and removing surplus soil to a distance of 50 m and making good surface in soft/loose soil completed all as specified and as directed.

Excacation of post holes (or simllar holes) each n,exc 0.5cum,and getting out in hard/dense soil retuting and filling in and ramming earth of brokrn rubble mixes with earch around in layers completed all as specified and as directed.

Removal of surplus excavated soil to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point complete all as specified & directed.

S&F in repair PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall or concrete surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying a coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation old previously treated surface of steel and iron work any description over 10 cm width or girth and applying a coat of synthetic enamel paint on old steel surfaces, complete all as specified and directed.

M&L for preparation old previously treated surface of wood,steel,iron, concrete ,brick ,stone etc any description over 10 cm width or girth and applying a coat of black bituminous paint on old surfaces, complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm hight, complete all as specified and directed.

M&L preparing old wood & wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surface of any description n.exc. 10cm width or girth when unconnected with other painting or when painted in a different tint including preparation of new steel surfaces, complete all as specified and directed.

Cleaning of vegetation, plants, bushes etc from accessible or non accessible roofs ,chajjas / walls including taking out of root and making good the disturbed surface with PCC 1 : 2 : 4 and plastering with CM 1 : 4 and painting with matching finish complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for forming contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound in Grade 'A' complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise proviceded for complete all as specified and as directed.

Dismantling barbed wire fencing, wire mesh, any type completed all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, post embedded in concrete, birck work, masonry etc. including taking out embedded portion and making good disturbed ground completed all as specified and directed.

divyarsh entrprise (BID ID -3366296)

Ramdev and Sons (BID ID -3365834)

GWALIOR TRADE LINK (BID ID -3365270)

Bhumi Construction (BID ID -3365553)

Shree Builders (BID ID -3365639)

M/S AAYUSH ENGINEERING&COMPANY (BID ID -3365074)

partechengineers (BID ID -3365887)

Shivaang Enterprise (BID ID -3366448)