PROVN OF RAIN PROTECTION WORK IN CERTAIN OFFRS MD ACCN IN SSE AND OTHER SANCTIONED WORKS UNDER GE (ARMY) NO 1 JODHPUR

Amount

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish to out side MD land complete all as specified and as directed.

Demolition of brick / block or stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed.

M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.

Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on stone or brick or concrete surfaces or RCC chajja or facia or on one side of lathing finished surface fair and even without using extra cement, complete all as specified and as directed.

M&L for glazed colour ceramic tiles (premium quality) of size 250X450X6-7mm / 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:3) complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.

M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Wood Grain Printed(Both sides) PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed (both sides) PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per spec & drawing, complete all as specified and directed.

M&L for Solid PVC Door Frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet incl all edges printed to match the shade reinforced with M.S. Sq tube, suppling & fixing in opening as per spec & drawing, complete all as specified and directed.

S&F Anodised aluminium barrel tower bolts, 150 mm size stove enamelled black, with bright bolt and fixed, complete all as specified and directed.

S&F Stainless steel butt hinges 100mm size medium wt fixed with steel nut blots in PVC door frames & PVC shutters, complete all as specified and directed.

S&F Anodised Aluminium handles 150 mm size D type with plate , complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

M & L for 25 mm thick PCC type B0, (1:2:4) (12.5mm graded aggregate as in sub base to flooring finishing the sureface even and rough to receive topping layer complete all as specified.

M&L for non skid ceramic coloured tiles (premium quality) of size 6 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab 20 to 25mm thick in floor laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:4 including dismantling of stone slabs of any description complete all as specified and as directed.

S & F in replacement 15mm bore bib taps, chromium plated of fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed,complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

S&F GI water tubing medium grade, 15 mm bore size, galvanized, with all fittings fixed to wall, ceilings or laid in floors including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.

S&F 75mm bore PVC (SWR) single socketed in any length with rubber ring joints laid in trench or floor or fixed to wall, complete all as specified and directed

S&F 110mm bore PVC (SWR) single socketed in any length with rubber ring joints laid in trench or floor or fixed to wall, complete all as specified and directed

S & F in replacement 75mm dia PVC (SWR) bends diminishing pieces or tapers, complete all as specified and directed

S & F in replacement 110 mm dia PVC (SWR) bends diminishing pieces or tapers, complete all as specified and directed

S & F in replacement 15mm dia pillar taps cast copper alloy with capstan heads, CP screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed, complete all as specified and directed

S & F in replacement 15mm bore stop valves/Angle valve, cast copper alloy, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S & F in replacement vitreous china squatting Pan, Orissa Pattern of size 580X440mm white (ISI marked) with integral foot rests and cast iron `P' or `S' trap front or back inlet Including flush pipe 40mm dia HDPE pipe etc, fixed in repairs Including connection to trap etc and provision of cement concrete bedding and making good to floor completely all as directed.

S & F in replacement Vitreous China Pedestal pattern WC light coloured (Ivory) complete with best quality PVC coloured seat & cover alll as directed.

S & F in replacement 10 litre capacity PVC Valveless symphonic action type flushing cistern, low level, white with inlet ball valve, float handle including brackets.

S & F in replacement chromium plated towel rail 600 mm long fixed with and including chromium plated brass screws and wooden / plastic beads

M&L for 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including taking down.

M&L for preparation of old decorated wall surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of white wash on wall, complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

S & F in replacement rotational moulded polyethylene water storage tanks triple layer white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified cap 1000 ltr including demoltion of old RCC tank of size 1200mm x 800mm x 600mm and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and directed.

Excavating in post holes (of similar holes) each n. Exc. 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance n. Exc. 50m and making good surface complete all as specified and directed.

M&L for PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for rolled mild steel confiRMing Fe-290 (Gde E-165) in door or gates of angle or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering ) and hanging also fastening and fixing complete all as specified and as directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M & L 28-30 mm thick chequered cement concrete tiles (lacquer coated) in any size & shape with 4-5 mm thick anti abrasive material topping layer (size, shape & shade as approved by GE), with grey cement and pigments, set, jointed and pointed in neat cement slurry as in floors/ path etc over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.

Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any description, ( colour, design & pattern, & size/ shape, as approved by GE) as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

M & L for Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted & set, jointed & grouted in cement mortar 1:3, complete all as specified and directed.

M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm, mineral gravel finish on top, using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen conforming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : 40 mm thick plain cement concrete 1:2:4 (using 20 mm stone crushed aggregate) as in roof padding, including WPC as per manufacturer instruction. NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item.

M&L digital ceramic heavy duty parking tiles 8 to 10 mm thick (square / rectangular) area of each tile exc. 0.08 Sqm but n. exc. 0.16 Sqm as in floors etc, and set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in CM 1:4 and including demolition complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using 20mm graded crushed stone aggregate, as in sub base of floor incld. compaction properly & universal and laid to level, complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed.

M&L preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L single coat of red- oxide, zinc chrome primer complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B-1using 20mm graded crushed stone aggregate as in roof kerbs or mud steps, weathering, rounded or chamfered on edge, fixing of holdfast etc complete all as specified & directed

M&L for Preparing new plastered or unplastered surfaces or old decorated surface of wall/rcc chajjas/ceiling/facias/ roof projection & etc. and applying two coats of exterior plastic emulsion over & including one coat of primer on wall/rcc chajjas/ceiling/facias/ roof projection & etc. obtain the desired finish all as per sample, complete all as specified and as directed.

M&L 100 mm thick PCC 1:4:8 type D-2 using 20mm graded crushed stone aggregate, as in sub base of floor incld. compaction properly & universal and laid to level, complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out any type of soil all as speicfied and directed.

M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St- 240, complete all as specified and directed.

S&F plates (plain or /mdsplate chequered) channels square cut or notched (ordinary and counter sunk) forming holes with riveted bolted or welding attachement, complete all as specified and directed.

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in any type of soil all as specified and directed.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

Taking down carefully UNSV submain wiring of any size and all as directed.

M&L for concealed point wiring complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LS cable (RYBN) 1100 volts grade drawn through and including non metallic rigid 20 mm dia PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FR-LS cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including piano sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of piano switches, sockets, fan regulators complete, suitable for One light / fan/ bell point controlled by one, one way switch, complete all as specified and directed.

All as per srl item no. 60.00 here-in-before but with 2.0 sq mm FRLS copper wire with 2.0 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F piano switch flush type single pole one way 6 Amp ISI Marked, complete all as specified and directed.

S&F Switch piano type, single pole, one way, 16 amps, 230 volts, complete all as specified and directed.

S&F Socket, two-in-one 6 pin,6/16 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed.

S&F Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed.

S&F LED lamp 9W complete all as specified and directed by the Engineer-in-Charge.

S&F Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.

S&F bldg security LED Light Luminaire of 36 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 40 mm bracket of 1.5 m in length(or bracket as approved by GE) including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable complete all as directed.

S&F LED light fitting 1x9W/1x10W bulkhead luminaires LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F MCB, B Curve type, 10 kA, 6-32Amp, SPN with over load and short circuit protection, complete all as directed.

S&F MCB, B Curve type, 10 kA, 63Amp, SPN with over load and short circuit protection, complete all as directed.

S&F in replacement MCB DB SPN (double door) 8 Way including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed.

S&F Ventilation fan metal body 230 mm sweep including louvers with cutting chases on brick wall and grounting with nut bolts complete all as specified and directed by Engr-in-charge.

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, nnected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 5 connected to Earthing test point all as ecified or indicated including testing on completion( Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover & GI 15 mm dia protection pipe upto 7.5 mtr. lead etc. complete )

Note:- (i) Qty's have been clubbed from 3 Nos sanction Job's, whose details as per appx (ii)- Qty's of BOQ Item No. 58.00 to 74.00 are only consider in Job No. JODH/MW/22/2024-25 NOTE:- (i)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

HINDUSTAN TRADING COMPANY (BID ID -3150773)

BEYLIM INFRA (BID ID -3145104)

M/S KAUTILYA GARG (BID ID -3150862)

M/S SHARMA ASSOCIATES (BID ID -3150778)

Nikhat nirman (BID ID -3150388)

RISING ELECTRICALS (BID ID -3150886)