Repairs/Renovation of Vindhychal Club at O. F. Itarsi Estate

Amount

Demolition of RCC cement concrete in ground floors & pavings OR brick work built in cement mortar & remove of dismantled material and depositing where directed.

Demolition of cement concrete in ground floors & pavings OR brick work built in cement mortar & remove of dismantled material and depositing where directed.

Supply and filling Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as directed.

M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 etc all as directed.

Excavating over areas hard dense soil, n exc 1.5 m deep and getting out as directed.

Excavating over areas in hard dense soil, exc 1.5 m deep and getting out as directed.

M&L for providing & Laying of cement concrete D2-type, 1:4:8 mix. (40mm graded aggregate) in foundations, filling, Floors etc.

M & L for hardcore of broken stone or boulder of gauge n.exc. 63mm, spread and levelled in layers not exceeding 15 CM thick watered and rammed to a true surface

M&L for providing & Laying of cement concreteType B2 1:2:4 (40/20 mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L Providing & lying Type B1 RCC 1:2:4 20mm gradded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc as directed

Providing form work to sides & soffits for rough finished flat surfaces of concrete i.e. foundations, footings, plinth beams etc.

Supply & fixing mild steel TMT bars 10MM Dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, beams(plinth & roof) etc, hooking ends and binding with mild steel wire (annealed) not less than 0.9 MM Dia dia or securing with clips.all as per specification and as directed .

Supply & Fixing of mild steel TMT bars 6 MM to 8mm Dia. cut to length bent to shape required including cranking, bending, hooking ends, placing in position and supply & binding with mild steel wire (annealed) not less than 0.9 MM dia or securing with clips all as directed.

M&L for providing & Construction of Brick work with sub-class `B' bricks straight or curved with modular bricks in cement mortar 1:4 all as per specification and as directed . (Sample to be approved before starting of work.)

M&L for providing & Construction of Brick work with sub-class `B' bricks straight or curved with modular sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortar 1:4 all as per specification and as directed . (Sample to be approved before starting of work.)

Excavating in trenches in hard dense soil , n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out and Returning, filling in soft /loose soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm. all as directed.

M&L for sail-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed including all required acessories as per requirement of site of work as specified and as directed.

M&L for non - skid Ceramic Coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L Glazed ceramic Coloured tiles in vertical surface 350x 250x 7 mm to 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc. as directed.

M&L Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. as directed

Supply & Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.etc. as directed.

Supply & fixing Fe- 290 (Gde E- 165) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete etc. as directed

S&F Vitreous china wash basin, white flat back, size 550mm x 440mm excluding taps, waste, chain and plug and porcelain stopper but including brackets & cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipeetc as ditected.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC valveless, syphonic action type, flushing cistern 10 lit., low level, white, with inlet, ball valve, float and handle including brackets fixed in repairs etc as ditected. etc as ditected.

S&F Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of trap and waste pipe) (excluding flushing cistern, flush pipe and waste pipe) all as directed.

S&F PVC (SWR)75m dia pipes single socketed, in any length with rubber ring joints with all required fittings, laid in trenches or in floors

S&F PVC (SWR)110m dia pipes single socketed, in any length with rubber ring joints with all required fittings, laid in trenches or in floors etc as directed.

Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of CPVC pipes 16 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 600mm etc. as directed.

Supply & fixing 15mm dia. Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms)®etc as directed. as directed.

Bib tap standard of PTMT 15 mm dia any colour high pressure screwed for iron pipe and fixed. (Minimum weight5mm-90gms)

S&F 75/100mm dia. PVC (SWR) floor trap, plain with grating including jointing with solvent cement etc. as directed.

Taking down Chowkhats or frames exc 1.5 sq. M but n exc 4 sq. M each & and fefixing in same opening including old frame removing to store etc. as directed.

Low density polyethylene pipes 40 mm dia (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

Demolition & dismentling Matting/felt on roof any type including,supports, cover fillets, if any all as directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as directed.

Preperation of new plastered surface of any description wood, steel, iron, concrete, brick, stone and supply and apply one coat black bituminous paint, etc., exceeding 10cm in width or girt

M&L for Reinforced cement concrete (nominal mix) in Type B0 1:2:4 (12.5mm graded aggregate)Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves all as directed.

M&L for preperation of Surfaces of any description, over 10cm in width or girth ,not otherwise described and supply and apply two coat aluminium paint all as directed.

M&L for Finishing walls with Acrylic Smooth exterior emulsion paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Preparation of old decorated plastered surface free from dust, dirt, loose scales etc. including removal of nails repairs/ refilling of plug holes, cracks, minor pittings with cement mortar, lime putty, plaster of paris and supply & apply two coat plastic emulsion paint on wall etc.as per specification and as directed.Make-(Asian,Burger,Narolac or its equivalent)

3mm thick wall care putty on wall all as directed

3mm thick wall care putty on ceiling all as directed

Preparation of old decorated wooden surfaces free from dust, dirt, loose scales, grease etc. scrapping with abbrasive paper or pumice stone touching up dents, scratches etc with primer and supply & apply two coat synthetic enamel paint, width/girth exceeding 10 cms, as per specification and as directed Make :- ASIAN -APCOLITE, BERGER-LUXOL( HI GLOSS ) & SHALIMAR - SUPER LAC or its EQUIVALENT.

Preparation of old painted steel surface free from dust, dirt, grease, loose scales etc. scrapping with abbrasive paper or pumice stone and supply & apply two coat of Synthetic Enamel paint, width/girth exceeding 10 cms, as per specification and all as directed Make :- ASIAN -APCOLITE, BERGER-LUXOL( HI GLOSS ) & SHALIMAR - SUPER LAC or EQUIVALENT.

Supply and providing 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as directed.

M&L 2nd class hard wood Exc 6 sq cm & n exc 13 sq cm Plain fillets.square, rectangular or triangular in section, clean sawn, secured with nails or brads.etc all as directed.

S&F 75mm long Butt hinges, medium weight, cold rolled mild steel, and fixed etc. as directed

S&F for extruded aluminium alloy handles 75 mm, fabricated type, anodised all as directed.

S&F Aluminium anodised, barrel tower bolts 75 mm of extruded section and fixed all as directed

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc. as directed.

Supply, fabrication and fixing of MS Rolled sections Fe 410 -W (GdeE- 250) quality A as in framing for cladding, main or cross beam purlins connected to common rafters etc. glazing and the like fixed with angle cleats and connecting plates, etc.

Supply ,fabrication and fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 all as directed.

Supply and fixing PRE- PAINTED Galvanised corrugated steel sheeting 0.50 MM total thickness Coloured glossy/matt finish regular modified polyster painting top painting 18-20 micron thick and bottom painting 5 - 7 micron thick epoxy primer service coat with corrugation side lap fixed with L type or J TYPE or cranked hook bolts or self tapping screw in roofs, walls etc. all as directed.

Preparation of new steel surface free from dust, dirt, loose scales etc. and supply & apply one coat red oxide primer & Two coats Synthetic Enamel Paint on steel surfaces etc. girth exc.10cm as per specification and as directed. Make :- ASIAN -APCOLITE, BERGER-LUXOL( HI GLOSS ) & SHALIMAR - SUPER LAC or EQUIVALENT.

Taking down Shutters of any description exc 1 sq. m & n exc 2sq.m refixing in same opening after required repair etc. as directed.

Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m and removing to store all as directed.

supply and fixing of steel rolling shutters thickness of laths 1.25 mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type all as directed.

Preparation of old decorated plastered surface free from dust, dirt, loose scales etc. including removal of nails repairs/ refilling of plug holes, cracks, minor pittings with cement mortar, lime putty, plaster of paris and supply & apply two coat oil bound distemper on ceiling etc.as per specification and as directed.Make-(Asian,Burger,Narolac or its equivalent)

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc

Supply & Plastering, Rendering 12 MM thick cement plaster on wall, ceiling, roof projection, facia etc. with cement mortar 1:4 on fair faces of brick work or concrete surfaces as directed.

Dubbing out cement plaster 1:4 average 10mm thick on irregular face of walls

Supply & Fixing of point wiring using PVC sheathed 1.5 sqmm copper wire in PVC cassing for light and Fan point controlled by one switch complete with earth wire (PVC sheathed 1.5 sqmm copper wire in green colour) & earthing connection complete & separate neutral as per code of practice for electrical wiring instalation 732-1989. Make of wire POLLYCAB/FINOLAX/ANCHOR/HAVELLS

Supply & Fixing of point wiring for 3 pin socket outlet 5 Amps. on the same board with other switches with 1.5 sqmm copper wire in PVC cassing capping complete with contiuous earth wire (PVC sheathed 1.5 sqmm copper wire in green colour) & earthing connection complete & separate neutral as per code of practice for electrical wiring instalation 732-1989. Make of wire POLLYCAB/FINOLAX/ANCHOR/HAVELLS

Supply & Fixing of point wiring for Independent 5 pin socket outlet 5 Amps. with 1.5 sqmm copper conductor in PVC cassing capping complete with contiuous earth wire (PVC sheathed 1.5 sqmm copper wire in green colour) & earthing connection complete & with separate neutral as per code of practice for electrical wiring instalation 732-1989. Make of wire POLLYCAB/FINOLAX/ANCHOR/HAVELLS

Supply & Fixing of point wiring for 5 pin socket outlet 15 Amps. with 2.5 sqmm copper conductor in PVC cassing capping complete with contiuous earth wire (PVC sheathed 1.5 sqmm copper wire in green colour) & earthing connection complete & with separate neutral as per code of practice for electrical wiring instalation 732-1989. Make of wire POLLYCAB/FINOLAX/ANCHOR/HAVELLS

Supply and fixing of SP MCBs 10/16/20 Amps. Make; Havells/Anchor/Standard/HPL

S & F 2x2.5 sq. mm + 1x1.5 sq. mm earth wire wiring for circuit/submain wiring along with earth wire with thw following sizes of FR is PVC Insulated copper conductor, single core cable in surface/ recessed as required

S/F of MCB Box 8 way single pole with neutral 200 Amps. Rated busbar with single door. Make: Havells/ Acchor/ Standard /HPL

M&L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fitting

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F of 5 AMPs. Switch piano fiush button single pole one way . Make; ANCHOR/CONA/ALMAC/HPL With ISI mark.

S & F of 5 Pin Socket 6 AMPs flush type mark; ANCHOR/CONA/ALMAC/HPL With ISI mark.

S & F of 15 AMPs. Switch piano fiush button single pole one way . Make; ANCHOR/CONA/ALMAC/HPL With ISI mark.

S & F of 5 Pin Socket 15 AMPs flush type mark; ANCHOR/CONA/ALMAC/HPL With ISI mark.

M&L Celling rose, 3 phase/PVC/Polycarbonate, Isolated body etc. As directed

Supply & Fixed of PVC rectangular or round block, make ANCHOR/CONA/BAJAJ/HPL/ HAVELLS with ISI mark.

S/F cost iron/pressed steell terminal boxes size 250mm x 200 with 60mm deep for mounting switches, sockets, fan regulator with 3 mm thick plastic laminated sheet cover.

S/F cost iron/pressed steell terminal boxes size 150mm x 75 with 60mm deep for mounting switches, sockets with 3 mm thick plastic laminated sheet cover.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m

M&L Earthing complete with galvanised steel earth plate electrode 60x60 cm. x 6mm thick, Buried directly in ground (Earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, cennected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

Sanjay Traders (BID ID -878004)

Tanuj Construction Company (BID ID -878080)

PYARELAL GALAR (BID ID -878715)

MANOJ ENTERPRISES (BID ID -878379)