WE BLY/GE (W)/119 OF 2025- 2026 SPECIAL REPAIR OF BLDG NO T-32 NCOS MD ACCN BHAGAT SINGH LINE BAREILLY UNDER GE (WEST) BAREILLY

M & L for non-skid ceremic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles over and including screed bed 15mm thick in cement mortar 1:6 for laying floor finishes including dismanlting of existing flooring complete all as specified and directed.

All as per serial item No 2 as above but as in vertical surfaces of tiles and rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified and as directed.

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of tiles over and including screed bed 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L for Glazed (plain /coloured) ceramic tiles wall 600x300x7mm thick on vertical faces of walls over and including 10mm thick rendeing in CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match including taking down old dado/skirting complete all as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing Gde FE-410-W complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) area exc 1.5 Sqm each and not exc. 4.00 Sqm including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. complete as specified by the manufacturer and directed.

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and directed.

S&F for 125x60mm (using 1.25mm thick PBI sheet) pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & filling with PCC 1:3:6 Type C0(using 12.50mm graded stone aggregate) necessary fixing lugs, SS hinges, lock strike plate, 02 x MS bar/flat at bottom of the frame etc, complete including wooden texture finished paint on the frame surface complete all as specified and as directed.

S&F for 105x60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C0(using 12.50mm graded stone aggregate) necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frameetc, including wooden texture finished paint on the frame surface complete all as specified and as directed.

S&F for 30 mm thick Factory made flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specified and as directed.

M & L for 35 mm thick plain framed glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, with sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass including campsule mesh tightly fixed with the glazed and skelton door shutter etc, of 2nd class hard wood, members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats all as specified and directed. (Note:- Campsule Mess will be measured and paid separately.)

S&F for 20 mm thick solid PVC board, both side prelaminated, one side with decorative choice lamination, and other side plain rigid white lamination as in cup board shutters, with wardrobe/ finch lock & PVC lipping on all exposed edges of same texture and shade, with complete all as specified and directed. Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) thickness of laminated not less than 0.25mm for inside rigid white type & 0.12 (14 micron) mm for outer decorative type. The laminate shall be fixed to base with approved adhesive as per manufacturer's instructions and machine pressed to ensure proper bonding with base ply and avoid air pockets. 3) Frame to be fixed to walls, soffits & base of cupboard with fasterners.

S&F for 18 mm thick solid PVC board, both side prelaminated, one side with decorative choice lamination, and other side plain rigid white lamination as in cupboard shelves & partitions including powder coated aluminium cleat (colour of powder coated to match colour / shade of laminate) and as in fixing to sides of cupboard, soffits & base of cupboard with SS fastner also including PVC lipping on all exposed edges of same texture & shade to match the laminate complete all as specified as directed. (Note: 1. Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2. Thickness of laminated not less than 1mm for inside plain white type. The laminate shall be fixed to base with approved adhesive as per manufacturer's instructions and machine pressed to ensure proper bonding with base ply and avoid air pockets.)

S&F for 16 mm thick solid PVC board, one side prelaminated and other plain white lamination, fixed on back side of wall of cup board with SS fastners complete all as specified and directed.

S&F for fancy type 200 mm long stainless steel handles etc, complete all as specified and directed

S&F for 100mm long stainless steel butt hinges complete all as specified and directed.

S&F for 150mm long aluminum anodised, barrel tower bolts of extruded section and fixed. complete all as specified and as directed.

S&F for 150mm long aluminum handles, cast type complete all as specified and directed.

S&F for 200mm long aluminum anodised, barrel tower bolts of extruded section and fixed.complete all as specified and as directed.

S&F for 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F galvanised Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed.

S&F 300 mm size, MS ordinary rat tail rod pattern springs including roller and roller plate complete including fixed to wooden and steel chowkats. complete all as specified and directed.

M&L Preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and directed.

M&L painting to wood and wood based surfaces of any description exc 10cm with or girth with two coats of synthetic enamel paint over a coat of pink primer including preparation of newly or previously untreated surface complete all as specified and directed.

M & L preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for painting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide/ zinc chromiume primer including preparation of newly or previously untreated surface complete all as specified and directed.

M & L for Plain Cement Concrete 1:3:6 type C-1(using 20 mm graded stone aggregate) as in bed blocks for hold fast in chowkhats and similar work etc complete all as specified and directed.

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) using WPC @ 3% by weight of cement including taking down plaster finishing the surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed.

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) using WPC @ 3% by weight of cement newly surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed

M&L 12mm thick cement plaster on brick surfaces or concrete surfaces (on internal surface) in cm (1:6) including taking down plaster finishing the surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed.

M&L 12mm thick cement plaster on brick surfaces or concrete surfaces (on internal surface) in cm (1:6) newly surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed

M & L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished including taking down plaster the surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed.

M & L for rendering 5mm thick on ceiling on concrete surfaces in cement mortar (1:3) newly surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed.

M&L white washing three coats on ceiling surfaces including preparation of newly plastered untreated surfaces and necessary scaffolding complete all as specified and directed.

M&L for applying 1 mm thick layer of wall care putty on external and internal wall surfaces including rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as specified and directed.

M&L Preparation of old decorated surfaces and applying one coat of white wash on ceilings surfaces and rubbing down with sand paper to have even and smooth surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment and applying two coats of oil bound distemper using Airless spray technology operating single spray gun paint usage over a coat of 1 mm thick layer of wall care putty and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology of operating single spray gun and paint usage over a coat of 1 mm thick layer of wall care putty and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for preparation by washing rubbing down and stoping of distempered and painted surface of old decorated or undecoated wall, roof surfaces and applying one coat of cement based paint complete all as specified and directed.

M&L for preparationof newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed

M&L brick work with fly ash bricks conforming to IS 12894 -2002 specification straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed

M&L brick work with fly ash bricks conforming to IS 12894 -2002 specification straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed

M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IIIrd floor) etc making good, cutting out exc 10cm and not exc 20cm girth in RCC chajjas in brick walls complete all as specified and directed.

Demolition of reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs and stair case similar work carefully and matching to adjoining disturbed surfaces complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for. complete all as specified and directed.

M & L form work to edges of concrete rough finished surface flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed.

Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.

M & L formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified and directed.

M & L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified.

M&L TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410-0 complete all as specified and directed.

S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, M&L Spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia complete all as specified and directed..

M&L RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in slab, shelves and stair case etc complete all as specified and directed.

M&L RCC type B 1, 1:2:4 (using 20mm graded stone aggregate) as in beams, cantilevers, lintels, over 1.5 m span. complete all as specified and directed.

M&L RCC 1:2:4 type B1(using 20 mm graded stone aggregate) as in chajjas and like complete all as specified and directed.

Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical, apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx 50 mm (10 mm gauge welded mesh ) & tack , securing with clips / linding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @ 200 ml every 50 kg of cement and applying two coat of Dr fixit /pidilite new coat ezee at interval of 8 hours cure for the surfaces complete all as spd as directed.

Demolition of cement concrete(un-reinforced), in any position and paving n.exc. 15 cm thickness (below or above ground level) includingu tile/ terrazzo floor complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and fair including forming 10 mm wide joints at not exceeding 3 m distance between adjoining slabs shall not exceed 10 mm in thickness and shall be filled with bitumen mastic i.e. bitumen and sand in proportion 1:2 complete all as specified and directed.

Supply only liquid waterproofing compound conforming to IS specification complete all as specified and directed..

M&L for 75 mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base floor and similar work complete all as specified and directed

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floors, paving etc finished even and fair with using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of concrete surfaces in CM 1:4 with water proofing compound concrete surface complete all as specified and directed.(NOTE:- WPC shall be measured and paid separatly)

Dismantling of roof terracing cement / brick concrete (un-reinforced) and existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material out of MD land complete all as specified and directed.

M&L 25mm thick cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) as in floor finishes even and fair to receive floor tiles complete all as specified and directed.

M&L for preparation of roof surface applying a coat of hot bituminous primer @ 0.30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane(weight not less than 4 kg/sqm, 3mm thick consisting 100 mm micron HMHDE FILM ) and applying one coat of industrial btumen grade 85/25 @ 1.2 kg/sqm on top of membrane with 100 mm overlap at side end lap where required as per manufacturer instruction and complete all as specified and directed

M & L for applying one coats of Bitumen based UV reflective and water proofing paint with aluminium finish over APP membrane and maximum coverage 8.00 Sqm per litre per coat on non assessible roof over APP membrance complete all as specified and directed.

M&L for 20mm thick Granite (Z- black colour only) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone over and including 15mm screed bed in cement mortar 1:6 including dismantling of existing tiles, hearting etc. complete all as specified and directed..

M&L for 20mm thick Granite (Z- black colour only) machine cut and machine, polished,and moulding, window cills, riser of steps and urinal partition wash basin platforms and flooring, skirting/ dados like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble laid & jointed with grey cement slurry mixed with pigment to match over and including 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed and dismantling of wall tile complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations complete all as specified and directed

S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding (1:2:5), minimum 150mm all round and finish just below level of rim of pan complete all as specified and directed.

S&F in replacement PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.

S&F in replacement fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed.

S&F in replacement 15 mm dia bib tap fancy type chromium plated with flange quarter turn including all necessary fittings complete all as specified and directed.

S&F in replacement 450mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed.

S&F 15mm bore CPVC water tubing with and including all fittings 'SDR 11' and fixed complete to wall and ceiling or laid in floors including taking down of existing pipe line of any description complete all as specified and directed.

S&F 20mm bore CPVC water tubing with and including all fittings 'SDR 11' and fixed complete to wall and ceiling or laid in floors including taking down of existing pipe line of any description complete all as specified and directed.

S&F for 0.8 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm), including waste pipe & SS coupling, washers etc complete all as specified and directed.

S&F in replacement 75 mm x 32 mm dia chromium plated waste fitting special size suitable for stainless steel sinks including PVC flexible waste pipe of approved quality complete all as specified and directed.

S&F in replacement 100mmx100mm stainless steel grating fixed complete all as specified and directed.

S&F in replacement fancy type stainless steel towel rail size 600mm long including a pair of brass bracket complete all as specified and directed.

S & F stainless steel plate rack not less than 5 Kg of size 31"X36"X10" complete all as specified and as dirrected.

S&F in replacement vitreous chinaware coloured wash hand basin with padestal of size 55X40X82cm complete including CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.

S & F in replacement fancy type 125 mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed.

S&F in replacement Brass chromium plated wall mixer 2 in 1, 15mm for mixing hot & cold water including provision of over head shower, screwed down three joints to steel pipes or unions and plugging and screwed to walls with and including necessary fitting complete all as specified and directed.

S&F in replacement fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes with and including necessary fitting complete all as specified and as directed.

S&F in replacement fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.

S&F in replacement of PVC corner set of three of size (12'X12" ,9"X9" and 6" X6" ) with railling and complete all as specified and directed.

S&F in replacement fancy type 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified and directed.

S&F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls. complete all as specified and directed.

S&F in replacement stainles steel Curtain Rod 25 mm dia of approved quality with two number decorative design as approved brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod all as directed and specified.

S&F 500 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position including dismalting of existing tank/ demolition of RCC water storage tank of capacity and any description all as specified in SSR Part I complete all as specified and directed.

S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified and directed.

S&F in replacement of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking up or down AC/PVC(SWR) rain water pipe, soil/waste/vent pipe of any size with fittings etc. complete all as specified and directed.

S & F PVC (SWR) 110 mm dia soil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall all as specified or as directed.

S & F PVC (SWR) 110 mm bore bends all as specified or as directed.

S&Fin replacement PVC (SWR) multi floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as specified and directed.

S&F PVC (SWR) 100 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.

S & F spun iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified and directed.

S&F 100 mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified and directed.

S&F 75 mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified and directed.

S&F in replacement 75 mm bore PVC cowl complete all as specified and directed.

S&F powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and including 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame of minimum size:92x38mmX1.15 mm thick for three tracks & 63 x 38 mm X 1.15 mm thick for two tracks.

S & F for stainless steel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed.

S&F for mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specfied and directed.

S&F for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 75mm dia pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 100mm dia pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F aluminium power coated (colour) section as in kitchen cabinet/ cupboard shelf including hanging self for clothes with aluminium clip/strips, pvc beadings fixed with adhesive on edging window,ventilator,glazed with aluminium shutter(medium weght) of suitable size, one or more rebate,cut to jointed together with cadmium plated steel screws including rubber bending or gasket for aluminium sections for fixing glass/Xpm jalli and necessary fittingd,screws, plugs for fixing screws, etc complete all as specified and directed by EIC. Weight of section should not less than 0.55kg per RM. (Note :Cost of rubber beading and required accessaries will be covered in the item and will be not paid extra.)

M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination work complete all as specified and directed.

S&F for computerised reflective letter / bldg number on ACP sheet (size 45mm x 45mm) and fixing with 04 nos of screw, rawal plug etc on wall in front of building complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning including watering and consolidation including dismatling of existing tile complete all specified and directed.

M&L for PCC kerb stone outer coloured surface machine pressed factory made of size 300 mm long , 300mm wide, 150mm thick using M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete including form work weathering, slightly rounded or chamfered angles and throating all as specifed and directed

Dismantling framed timber scantlings 40 sq. cm and over in section, in any complete all as specified and directed.

Dismantling unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade Fe-410 gde st- 240 complete all as specified and directed.

Dismatling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets etc complete all as specified and directed.

M&L for 4 mm thick E board classic tiles for insulation and accoustic purpose 60X60 cm with and including powder coated galvanium iron snap grid with 32X25X1.5 mm thick tee section and 32X25X1.5 mm thick angle section with all hanging /sopporting arragements as in false ceilling complete all as specified and directed.

S&F magnet for wardrobe shutters, (02 Nos magnes for each shutter) including stainless screws complete all as specified and directed.

Taking down carefully unserviceable copper/aluminium point wiring (Light, fan, socket or power) complete including unserviceable fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, brackets, except ceiling fittings, bulk head fittings, tube light fittings etc. and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down or out old sub main copper/aluminium cable off various sizes from existing conduit/ batten complete all as specified and directed.

Taking down old MCB DBs/ main switches off size complete all as specified and directed

M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with new sunken concealed terminal boxes complete all as specified and directed for the following :- (a) One light/fan/Bell point controlled by one switch

(b) One 3 pin, 6 Amps, socket outlet on the same board, controlled by another switch.

(c) One multi pin socket outlet, 6 Amps, on Independent board.

M&L for wiring with and including multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with new sunken concealed terminal boxes complete all as specified and directed.

S&F, switch piano, flush button, single pole, one way 15 Amps complete all as specified and directed

S&F, Socket outlet 15 Amps complete all as specified and directed

S&F, switch piano, flush button, single pole, one way, 5 Amps complete all as specified and directed

S&F, Socket outlet 5 Amps complete all as specified and directed

S&F Bell Push, flush type, 6 Amps, Single pole, one way, 230 Volts AC circuit complete all as specified and directed.

S&F Bell (Ding dong, 230 Volts AC circuit single pole complete all as specified and directed.

M & L for ceiling fan regulators, Electronic steped type, AC, 230 Volts complete all as specified and directed.

S&F, ceiling rose, 3 terminal , any shade, of PVC/Polycarbonate, isolated body complete all as specified and directed

S&F sheet metal distribution board, SPN, 8 way 240 Volt, single door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed.

S&F in replacement , miniature circuit breakers, type curve ‘B’ , 10 KA, SP, 6 to 32 Amps complete all as specified and directed.

S&F in replacement miniature circuit breakers, SPN, type curve‘C’ 10KA, 32 Amps, 240 Volts. complete all as specified and directed.

S&F MCCB triple pole 63 Amp, 415 volts curve 10 kA complete all as specified and directed.

S&F in replacement sheet metal distribution board TPN, 4 way 415 volts, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200A tinned copper bus bar complete all as specified and directed.

S&F in replacement LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 20 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 10 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size complete all as specified and directed.

S & F of 1100 volts grade heavy duty two single core 4 Sqmm size (Nominal Area) PVC insulated (FRLSH) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 4 Sqmm size (Nominal size) stranded copper conductor PVC insulated (FRLSH) (green colour) cable as earth wire complete all as specified and directed. (NOTE: - TWO SINGLE CORE CABLES ALONG WITH EARTH WIRE AND PVC CONDUIT SHALL BE MEASURED AS ONE UNIT LENGTH)

S&F in replacement LED Bldg Street light fitting 35 - 36W, IP 65 made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP65 protection, roadway luminaire with high power LED as light source 1 x 35/36 Watt, LED 6000K, complete with all accessories internally pre-wired including Street Light bracket made of light grade GI pipe 32 mm bore and 1.20 mtr long duly bent to shape including 2 Pairs of MS Clamps made out of 40mm x 3mm M.S. flat, nuts, bolts, washers etc complete all as specified and as directed.

M&L for earthing and testing complete with galvanized iron earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 M below normal ground level with top edge plate at adepth not less than 1.5M below normal ground level connected to and including earth lead GI wire 4 mm dia, by means of bolts and nuts,check nuts and washers etc.,made of GI and connected to panel/distribution board and earthing test point and earth dolly all as shown in elect plate No.3 of SSR Part-I including necessary earth work,excavation PCC chamber cover with handle (PCC 1:2:4) including 20mm dia GI pipe of medium grade for watering and 15mm dia GI pipe of light grade for protection of earthing lead ,wire mesh, funnel, charcoal dust,common salt,copper lugs etc all as specified and directed .

Taking down ceiling fan aof any size and place in safe cutody complete all as specified and directed.

Hanging only fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Repair/ maint of ceiling fan including replacement if bearing, greasing and painting with white paint complete all as specified and directed.

S&F Exhaust Fan Metal Body AC single phase 230/240V of size 300 sweep with louver complete all specified and directed.

M&L for Angle Holder, insulated body with back plate with & including LED Lamp 7 Watt suitable for batten fittings complete all as specified and directed.

S&F water heater storage type, electric,capacity 25 litres.BEE 5 star rated complete all as specified and directed.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Please Enable Macros to View BoQ information