Remodelling of public toilets located at PSR Road, Bhanu Nagar in 28th Division AE6 Section under Circle-II Area

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including, complete for finished item of work, but including the cost of conveyance of all materials. (600x600 of 8mm to10 mm thick)

Walling with glazed red or white full body ceramic wall tiles of size 300 x 450mm / 320mm x 400mm and thickness 6 mm 1st quality, including near cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including complete for finished item of work, but including the cost of conveyance of all materials.

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS. (Internal Walls)

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS. (External Walls)

Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc., complete.

Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor, watering, curing etc., complete.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm BMW-D.34

Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate, MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., complete as directed by the departmental authorities.

Supplying and Fixing Orissa pan W.C of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'P' trap etc., complete. (BMW-D.05)

ALUMINIUM COMPOSITE PANEL 4mm THICKNESS (ACP) : Providing and fixing Aluminium composite panels of Durabuild/Alucobond or approved equivalent and of approved colour for external wall cladding at all heights and elevation including necessary aluminium frame work. The aluminimum composite panel should consist of 3mm thick thermoplastic core of anti oxidant LDPE sandwitched between 2 skins of 0.5mm thick aluminium alloy sheet making a total panel thickness of 4mm. The surface shall be finshed with PVDF based coating on the top side and service coating on the reverse side shall be with a polymer paint. Coating shall conform to ECCA or AAMA . Acoustic Properties Average airborne sound transmission loss 26 db. The system shall be designed to withstand a wind pressure of 200 kg/Sqm and shall be fixed to the masonry/RC walls with necessary clamps, brackets and anchor fasteners.All clamps and brackets shall be Hot dip galvanized minimum 80 microns thick and shall conform to IS: 4759-1996. The extruded aluminium section shall be anodised in approved colour with a anodic coating of minimum 20 microns. Extruded section shall be of 6063 T5 or T6 alloy conforming to ASTM B 221. Any other fastening straps, nuts, bolts, rivets, washers, etc. shall be in stainless steel SS 304 grade. All necessary Anchor fastners shall be of HILTI or Fischer make or approved equivalent and of SS 304 grade. Rate shall include to provide EPDM gaskets, open cell polyethylene backer rods, weather sealant etc, all materials and labour complete in all respects. The weather sealant shall be Dow Corning 991H or approved eq.

Providing MS Structural support for backside of elevation design including all charges etc., complete.

Providing Acrylic Name board with 3D embosing including internal wiring circuit, lighting, drivers etc., complete. Size of 20' x 4' including logo.

Providing Acraulic Name board including internal wiring circuit, lighting, drivers etc., complete. Size 1.80*1.08

Providing Silicon lights for high lighting purpose high emmisive soft 4K light including cost and conveyance of all materials etc., complete.

Providing Ceiling lights 4" size including material and all labour charges, cost and conveyance etc., complete.

Providing Epoxy, laticrete for front wall including material, conveyance etc., complete.