Part-A) Repair and maintenance of type-V quarters, ORH and Narmada club at Habibganj under ADEN(Works)Bhopal. Part-B) Repair and maintenance of Type- I,II,III and IV quarters at shakti nagar railway colony Habibganj under ADEN(Works)Bhopal.

A-All DSR-2023 Items of Part-A.

B-All NS Items of Part-A.

C-All DSR-2023 Items of Part-B.

Item Breakup - A-All DSR-2023 Items of Part-A.

88 mm, weighing not less than 170 gms 17.73.2 600 mm long towel rail with total length of Each 20 708.95 14179

88 mm, weighing not less than 190 gms. 17.81 Providing and fixing floor mounted, white Each 15 18212.9 273193.5 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of 150 capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the 18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 151 18.7.1 15 mm nominal dia Pipes Metre 50 286.8 14340 BHOPAL DIVISION-ENGG/WEST CENTRAL RLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 152 18.8.1 15 mm nominal dia Pipes Metre 100 497.8 49780 153 18.8.3 25 mm nominal dia Pipes Metre 75 627.25 47043.75 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes 18.9 jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 154 18.9.3 25 mm nominal dia Pipes Metre 60 355.4 21324 155 18.9.6 50 mm nominal dia Pipes Metre 25 794.25 19856.25 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 156 18.15.1 15 mm nominal bore Each 50 353.25 17662.5 Providing and fixing brass stop cock of 18.16 approved quality : 157 18.16.1 15 mm nominal bore Each 50 353.25 17662.5 Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 158 18.17.1 25 mm nominal bore Each 15 622.4 9336 159 18.17.4 50 mm nominal bore Each 10 1026.65 10266.5 Providing and fixing gun metal non- return 18.19 valve of approved quality (screwed end) : 18.19.1 25 mm nominal bore 160 18.19.1.1 Horizontal Each 5 591.4 2957 18.19.4 50 mm nominal bore 161 18.19.4.1 Horizontal Each 5 1371.2 6856 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : 18.21.1 30 cm length 162 18.21.1.1 15 mm nominal bore Each 30 85 2550 18.21.2 45 cm length 163 18.21.2.1 15 mm nominal bore Each 100 97.75 9775 Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet 164 18.22.2 150 mm diameter Each 50 222.35 11117.5 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, 18.47 refilling the earth or cutting of wall and making good the same complete wherever required : 165 18.47.1 15 mm nominal bore Each 25 829.45 20736.25 166 18.47.3 25 mm nominal bore Each 25 950.35 23758.75 167 18.47.6 50 mm nominal bore Each 50 1520.8 76040 BHOPAL DIVISION-ENGG/WEST CENTRAL RLY 18.48 Providing and placing on terrace (at all floor Per 5000 11 55000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable locking 168 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 169 18.49.1 15 mm nominal bore Each 20 506.8 10136 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS 18.50 standards and weighing not less than 810 gms. 170 18.50.1 15 mm nominal bore Each 30 820.7 24621 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 171 18.52.1 15 mm nominal bore Each 30 670.45 20113.5 Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 172 18.53.1 15mm nominal bore Each 20 574.3 11486 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of 18.54 approved quality and colour. 18.54.1 15 mm nominal bore, 86 mm long, weighing Each 40 125.6 5024 173 not less than 88 gms Providing and fixing PTMT stop cock of 18.55 approved quality and colour. 18.55.1 15 mm nominal bore, 86 mm long, weighing Each 30 118.5 3555 174 not less than 88 gms Providing and fixing PTMT pillar cock of 18.56 approved quality and colour. 18.56.1 15 mm nominal bore, 107 mm long, weighing Each 25 208.45 5211.25 175 not less than 110 gms Providing and fixing PTMT grating of approved 18.58 quality and colour. 18.58.1 Circular type 176 18.58.1.1 100 mm nominal dia Each 40 37.6 1504 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing PTMT extension nipple for 18.75 water tank pipe, fittings of approved quality and colour. 18.75.1 15 mm nominal bore, weighing not less than Each 20 53.6 1072 177 32 gms 18.75.3 25mm nominal bore, weighing not less than Each 20 113.35 2267 178 62 gms 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 179 19.6.2 150 mm dia. R.C.C. pipe Metre 40 556.45 22258 180 19.6.3 250 mm dia. R.C.C. pipe Metre 40 899.8 35992 21.0 ALUMINIUM WORK 21.1S General BHOPAL DIVISION-ENGG/WEST CENTRAL RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket 21.1 etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimum thickness Kg 200 530.9 106180 181 of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.2 Powder coated aluminium (minimum thickness Kg 150 634.45 95167.5 182 of powder coating 50 micron) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in 21.2 aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.2 Pre-laminated particle board with decorative Sqm 30 1115.4 33462 183 lamination on both sides Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 30 1176.8 35304 184 (weight not less than 10kg/sqm) 21.3.2 With float glass panes of 5 mm thickness Sqm 20 1505.25 30105 185 (weight not less than 12.50 kg/sqm) Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of 21.4 cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 21.4.1 With stainless steel cover plate minimum 1.25 Each 8 2823.85 22590.8 186 mm thickness BHOPAL DIVISION-ENGG/WEST CENTRAL RLY Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing 21.8 weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 187 21.8.1 Upto 5mm depth and 5 mm width Metre 50 96.75 4837.5 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 21.12 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. 21.12.1 Anodized (AC 15 ) aluminium tubular handle Each 20 575.75 11515 188 bar 21.13 Providing and fixing Brass 100mm mortice Each 20 528.85 10577 latch and lock with 6 levers without pair of 189 handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 21.17 Providing and fixing anodised aluminium grill Kg 20 638.35 12767 (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 190 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). Total 8332664.77

Item Breakup - B-All NS Items of Part-A.

Providing and applying acrelic aggregate Sqm texture wall coating of spectrum pigment rustic fine stone finish paint in required shade as per approved by arhitect and engineer in charge (natural average 2 mm thickness to be used with stamless trowel and plastic travel or spray gun the approved compositionas per manufacturer specification has to be used of approved shade and colour creck free flexible over smoothly plasterd surface of walls with any undercoat needed mark as per the manufacturer, specification scaffolding tied and untied at all levels and location compliated as directed work to be executed by local authority delar of speciwum texured paint pvt ltd Total 703008.00

Item Breakup - C-All DSR-2023 Items of Part-B.