PROVN OF POWER CABLE FOR PAR BUILDING, PROVN OF ELECTRIC SUPPLY FOR BP NO. 30, 31, 32, SR TO AMF PANELS FOR DG SET, SR TO UNDER GROUND CABLE FOR TECH FLIGHT AND PROVISION OF 02 SPLIT ACs AT AF STATION IZATNAGAR, BAREILLY.

Amount

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation, trenches for laying of water tubing or cables etc. and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for laying of course sand free from sharp materials as in filling in trenches for cable protection, laid to a uniform thickness of 23 cm (15 cm under the cable and 8 cm over the cable) and gently punned down to 18 cm thickness as required complete all as specified and directed.

M & L for laying brick as in protection covers over cables using well brunt sub class 'B' old size bricks in trenches over sand cushioning complete all as specified and directed.

S & F of 50 mm bore light grade galvanised iron tubing with all necessary GI fittings as in protection pipe of cable laid in trenches or fixed to pole or other vertical surface or for insertion in horizontal boring complete all as specified and directed.

S & F of 80 mm bore light grade galvanised iron tubing with all necessary GI fittings as in protection pipe of cable laid in trenches or fixed to pole or other vertical surface or for insertion in horizontal boring complete all as specified and directed.

M & L for making horizontal hole by mechanical Boring under hard standing, pavements or roads for insertion of GI pipes 50 to 80 mm bore and making good the disturbed surface complete all as specified and as directed.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked, 25 Sqmm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing complete all as specified and directed.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked, 50 Sqmm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing complete all as specified and directed.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked, 50 Sqmm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing with and including taking down old unserviceable cable alongwith old protection bricks complete all as specified and directed.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked, 70 Sqmm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing complete all as specified and directed.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked, 70 Sqmm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing with and including taking down old unserviceable cable alongwith old protection bricks complete all as specified and directed.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked, 95 Sqmm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing with and including taking down old unserviceable cable alongwith old protection bricks complete all as specified and directed.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked, 120 Sqmm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing with and including taking down old unserviceable cable alongwith old protection bricks complete all as specified and directed.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked, 150 Sqmm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing complete all as specified and directed.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked, 300 Sqmm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing with and including taking down old unserviceable cable alongwith old protection bricks complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.50 m below normal ground level, connected to galvanised earth strip of size 32 X 6 mm by means of GI nut-bolts, washer and check nuts etc., all as shown on electrical plate No. 3 of MES schedule 2009, Part–I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel TMT bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:2:4 type B-1, GI protection pipe light grade 40 mm bore including testing on completion of job complete all as specified and directed. NOTE: - ON TESTING AFTER COMPLETION OF JOB, IF DESIRED EARTH RESISTANCE (i.e. LESS THAN ONE OHM) IS NOT OBTAINED, THE EARTHING SHALL BE REDONE BY THE CONTRACTOR WITHOUT ANY EXTRA COST TO GOVT.

S & F of cable straight through joint indoor / outdoor as ordered, heat shrinkable type cable jointing kit suitable for 25 to 50 Sqmm size, 3.5 or 4 core, 1.1 KV grade, XLPE armoured, aluminium conductor cable including necessary jointing material and accessories complete all as specified and directed.

S & F of cable straight through joint indoor / outdoor as ordered, heat shrinkable type cable jointing kit suitable for 150 to 185 Sqmm size, 3.5 or 4 core, 1.1 KV grade, XLPE armoured, aluminium conductor cable including necessary jointing material and accessories complete all as specified and directed.

Supply, installation, testing and commissioning of factory made LT feeder pillar box, outdoor type, platform mounted of size 1200 X 1000 X 450 mm suitable for 415 volts, 3 phase, 4 wire system, 50 Hz supply, having aluminum LT bus bar of 600 Amperes for phases and neutral, install on porcelain / epoxy insulator. The panel shall be dust proof, vermin proof (IP-54) and painted with two coats of syntheitc enameled paint over a coat of red oxide primer and made out of 3.15 mm CRCA sheet self moulded type duly mounted on 50 x 50 x 6 mm angle iron frame, front and rear opening with double shutter and locking arrangement alongwith 50 mm lock make-Navtal or Harrison with and including grouting of panel with necessary PCC work by making a plateform of cement concrete 1:2:4, type B-1 of size more than 15 cm at all sides of the size of panel board and minimum 20 cm thick. The LT panel shall be got fabricated from an approved factory / fabricating house, who posseses test certificate from CPRI for fabrication of similar type of feeder pillar boxes and having modern fabrication and testing facility which includs atleast 07 tanks pre-treatment facility comprising de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting of minimum thickness of 80 micron with approved shade of RAL-7032 (SIEMENS GRAY) complete all as specified and directed comprising of the following accessories in housed in panel box:-

S & F of 1100 volts grade heavy duty 04 single core 10.00 Sqmm size (Nominal Area) PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with 02 continuous run of 6.00 Sqmm size (Nominal size) stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed. NOTE: - FOUR SINGLE CORE CABLES ALONG WITH TWO EARTH WIRE AND PVC CONDUIT SHALL BE MEASURED AS ONE UNIT LENGTH.

S & F of 3P+N+Earth 63 Ampere capacity alongwith sheet metal enclosure having five pin and earth plug with socket alongwith provision of one TPN 63 Ampere capacity Make- Legrand, L&T or Indo Asian complete all as specified and directed.

Supply, installation, testing and commissioning of factory made LT feeder pillar box, outdoor type, platform mounted of size 1200 X 1000 X 450 mm suitable for 415 volts, 3 phase, 4 wire system, 50 Hz supply, having aluminum LT bus bar of 400 Amperes for phases and neutral, install on porcelain / epoxy insulator. The panel shall be dust proof, vermin proof (IP-54) and painted with two coats of syntheitc enameled paint over a coat of red oxide primer and made out of 3.15 mm CRCA sheet self moulded type duly mounted on 50 x 50 x 6 mm angle iron frame, front and rear opening with double shutter and locking arrangement alongwith 50 mm lock make-Navtal or Harrison with and including grouting of panel with necessary PCC work by making a plateform of cement concrete 1:2:4, type B-1 of size more than 15 cm at all sides of the size of panel board and minimum 20 cm thick. The LT panel shall be got fabricated from an approved factory / fabricating house, who posseses test certificate from CPRI for fabrication of similar type of feeder pillar boxes and having modern fabrication and testing facility which includs atleast 07 tanks pre-treatment facility comprising de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting of minimum thickness of 80 micron with approved shade of RAL-7032 (SIEMENS GRAY) complete all as specified and directed comprising of the following accessories in housed in panel box:-

Supply, installation, commissioning & testing as in replacement of old unserviceable AMF panel by providing new dust and vermin proof, having front and rear openings, outdoor type AMF control panel alongwith circuit diagram and 24 volts DC system suitable for 125 KVA DG set (Installed at PH No. 11) with and including internal wiring, floor mounted type totally enclosed made out of mild steel CRCA sheet of 3.15 mm thickness duly spray painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed comprising of the following accessories: - (i) 400 Ampere rated aluminium bus bar- 04 Nos. (ii) AC Voltmeter 0-500 volts, 96 mm x 96 mm size, digital LED type- 02 Nos. (iii) AC Ampere meter 0-500 Amperes, 96 mm x 96 mm size, digital LED type- 02 Nos. (iv) Frequency meter 40-99.99 Hz, size 96 mm x 96 mm, digital LED type- 02 Nos.

(v) Indicating lamps RYB, LED Type- 02 Sets (Set of three) 01 Set for DG side and another for main side. (vi) Battery charging indicator lamp- 01 No. (vii) Auto and Manual Test Switch- 01 No. (viii) Battery charging Ampere meter and Voltmeter digital LED type- 01 No. Each. (ix) MCCB, 04 pole of size frame 2, current rating of 250 Ampere and ultimate breaking capacity ICU 35 KA for 415 volts, 03 phase 4 pole Thermal magnetic release type and adjustable overload upto 80 to 100% and neutral protection upto 100%, AC supply as per Cat. Part No. CSE2N250ATM4P of C&S Electric or having same specifications in L&T or Legrand- 02 Nos. (x) Under / over voltage relay, suitable for 3 phase 415 volts AC supply- 02 Nos. (xi) Electronic timer type ET, suitable for 24 volts, DC supply as per recommendation of the manufacturer of DG set, DC supply for 0 - 30 seconds- 01 No. (xii) Engine starting relay with sequence timer and master timer suitable for 24 volts DC supply as per recommendation of the manufacturer of DG set- 01 No.

(xiii) Battery charging transformer 24 volts DC as per recommendation of the manufacturer of DG set- 01 No. (xiv) By pass arrangement with rotary type by pass Change over switch AC on load to isolate the AMF panel- 01 No. (xv) Three pole power contactor with standard coil voltage of 415 volts 50 Hz and auxiliary contact of 02 Nos. having AC three phase rating of 250 Amperes MNX series type of size FR-6 as per Cat. Part No. CS90140 of L&T or having same specifications in Siemens, Schinder, Legrand or BCH- 02 Nos. (xvi) Booster relay of 24 volts capacity- 01 No.

Supply, installation, commissioning & testing as in replacement of old unserviceable AMF panel by providing new dust and vermin proof, having front and rear openings, outdoor type AMF control panel alongwith circuit diagram and 24 volts DC system suitable for 250 KVA to 320 KVA DG set (Installed at 24 Sqn, Recce Lab and Modern Hanger) with and including internal wiring, floor mounted type totally enclosed made out of mild steel CRCA sheet of 3.15 mm thickness duly spray painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed comprising of the following accessories: - (i) 600 Ampere rated aluminium bus bar- 04 Nos. (ii) AC Voltmeter 0-500 volts, 96 mm x 96 mm size, digital LED type- 02 Nos. (iii) AC Ampere meter 0-500 Amperes, 96 mm x 96 mm size, digital LED type- 02 Nos. (iv) Frequency meter 40-99.99 Hz, size 96 mm x 96 mm, digital LED type- 02 Nos.

(v) Indicating lamps RYB, LED Type- 02 Sets (Set of three) 01 Set for DG side and another for main side. (vi) Battery charging indicator lamp- 01 No. (vii) Auto and Manual Test Switch- 01 No. (viii) Battery charging Ampere meter and Voltmeter digital LED type- 01 No. Each. (ix) MCCB, 04 pole of size frame 2, current rating of 630 Ampere and ultimate breaking capacity ICU 65 KA for 415 volts, 03 phase 4 pole Thermal magnetic release type and adjustable overload upto 80 to 100% and neutral protection upto 100%, AC supply as per Cat. Part No. CSC6S4 of C&S Electric or having same specifications in L&T or Legrand- 02 Nos. (x) Under / over voltage relay, suitable for 3 phase 415 volts AC supply- 02 Nos. (xi) Electronic timer type ET, suitable for 24 volts, DC supply as per recommendation of the manufacturer of DG set, DC supply for 0 - 30 seconds- 01 No. (xii) Engine starting relay with sequence timer and master timer suitable for 24 volts DC supply as per recommendation of the manufacturer of DG set- 01 No. (xiii) Battery charging transformer 24 volts DC as per recommendation of the manufacturer of DG set- 01 No.

(xiv) By pass arrangement with rotary type by pass Change over switch of capacity 630 Ampere AC as per Cat. Part No. E-CSBS630K4 of C&S Electric or having same specifications in Siemens, Schinder, Legrand or BCH suitable for AMF panel on load to isolate the AMF panel- 01 No. (xv) Three pole power contactor with standard coil voltage of 415 volts 50 Hz and auxiliary contact of 02 Nos. having AC three phase rating of 650 Amperes MNX series type of size FR-6 as per Cat. Part No. CS96327 of L&T or having same specifications in Siemens, Schinder, Legrand or BCH- 02 Nos. (xvi) Booster relay of 24 volts capacity- 01 No.

S & F as in replacement aluminium lugs suitable for cable of size 650 Sqmm, 3.5 core complete all as specified and directed.

S & F as in replacement aluminium lugs suitable for cable of size 400 Sqmm, 3.5 core complete all as specified and directed.

S & F as in replacement aluminium lugs suitable for cable of size 300 Sqmm, 3.5 core complete all as specified and directed.

S & F as in replacement aluminium lugs suitable for cable of size 240 Sqmm, 3.5 core complete all as specified and directed.

S & F as in replacement aluminium lugs suitable for cable of size 185 Sqmm, 3.5 core complete all as specified and directed.

Supply, installation, testing and commissioning of factory made LT feeder pillar box of size 750 X 600 X 450 mm, outdoor type, platform mounted of suitable size for 415 volts, 3 phase, 4 wire system, 50 Hz supply, having aluminum LT bus bar of 300 Amperes for phases and 200 Amperes for neutral, install on porcelain insulator. The panel shall be dust proof, vermin proof (IP-54) made out of 14 SWG CRCA sheet self moulded type duly mounted on 40 x 40 x 6 mm angle iron frame, front and rear opening with double shutter and locking arrangement alongwith 50 mm lock make-Navtal or Harrison with and star delta starter suitable for 15 HP motor pump, preparation of steel surface alongwith painted with two coats of syntheitc enameled paint over a coat of red oxide primer complete all as specified and directed comprising of the following accessories in housed in feeder pillar box:-

Supply, installation, testing and commissioning of factory made LT feeder pillar box of size 750 X 600 X 450 mm, outdoor type, platform mounted of suitable size for 415 volts, 3 phase, 4 wire system, 50 Hz supply, having aluminum LT bus bar of 300 Amperes for phases and 200 Amperes for neutral, install on porcelain insulator. The panel shall be dust proof, vermin proof (IP-54) made out of 14 SWG CRCA sheet self moulded type duly mounted on 40 x 40 x 6 mm angle iron frame, front and rear opening with double shutter and locking arrangement alongwith 50 mm lock make-Navtal or Harrison with and star delta starter suitable for 25 HP motor pump, preparation of steel surface alongwith painted with two coats of syntheitc enameled paint over a coat of red oxide primer complete all as specified and directed comprising of the following accessories in housed in feeder pillar box:-

Supply, installation, testing and commissioning of factory made LT feeder pillar box of size 750 X 600 X 450 mm, outdoor type, platform mounted of suitable size for 415 volts, 3 phase, 4 wire system, 50 Hz supply, having aluminum LT bus bar of 300 Amperes for phases and 200 Amperes for neutral, install on porcelain insulator. The panel shall be dust proof, vermin proof (IP-54) made out of 14 SWG CRCA sheet self moulded type duly mounted on 40 x 40 x 6 mm angle iron frame, front and rear opening with double shutter and locking arrangement alongwith 50 mm lock make-Navtal or Harrison with and star delta starter suitable for 41 HP motor pump, preparation of steel surface alongwith painted with two coats of syntheitc enameled paint over a coat of red oxide primer complete all as specified and directed comprising of the following accessories in housed in feeder pillar box:-

Supply, installation, commissioning and testing of hi wall, 100% copper wounded, 1.00 TR capacity, BEE 5 star rating, inverter type (DC inverter type) having heating and cooling function, CFC free split AC with indoor and outdoor units with and including cordless remote control unit, power cable and copper tubing duly insulated between indoor and outdoor units, PVC drainage pipe, mounting stand for outdoor unit complete all as specified and directed. NOTE: - Power cable, Copper piping between indoor and outdoor unit, mounting stand for outdoor unit and drain pipe as required shall be deemed to be included in the unit rate of this item.

VINYAK TRADERS

sunder and company

Vishal Traders