Balance work of commissioning of capped tube well Dabri under UT Capex Budget (Erstwhile Languishing).

Amount

Construction of 10000 Glns capacity GSR/Sump Tank (02 Nos.) Earth work in bulk excavation by manual means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. On plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be leveled and neatly dressed in all kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified gfrade for reinforced cement concrete work including pumping of R.M.C from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. Note:- Cement content considered in this item is @ 330/kg cum. Excess/ less cement used as per design mix is payable/ recoverable separately. All works upto plinth level (Bed Slab+ Gola)

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified gfrade for reinforced cement concrete work including pumping of R.M.C from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. Note:- Cement content considered in this item is @ 330/kg cum. Excess/ less cement used as per design mix is payable/ recoverable separately. All works above plinth level upto floor level V (Walling, beams)

Reinforcement cement concrete work in Arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo -Mechanically Treated bars of grade Fe-500 or more

Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns .

Extra for shuttering in circular work (20% of respective centering and shuttering

Centring and shuttering including strutting, propping etc and removal of form for walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Extra for shuttering in circular work (20% of respective centering and shuttering

Centring and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Extra for shuttering in circular work (20% of respective centering and shuttering

centering and shuttering including strutting, propping etc. and removal of form for: Arches, domes, vaults upto 6 mtrs span.

12mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1cement: 3 coarse sand)

12 mm cement plaster of mix: 1 :4 (1 cement: 4 coarse sand)

Extra for plastering on circular work not exceeding 6m in radius: In one coat

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate

Providing and incorporating ( During concreting GP sheet strings water seal 1.25 mm nominal thick at const. joints including ends so as to form a continues barrier strips area excluding laps to be measured

Providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement

Providing and fixing UPVC plain, bends 80mm dia

Providing and fixing M.S. Manhole cover rectangular with frame 0.60 mtr x 0.60 mtr. Fabricated out of 25x25x6mm thick angle iron with MS Sheet 1.25mm thick with locking arrangement. The cover is to be grouted in cement concrete 1:2:4 complete as directed by Engineer-in-charge.

Fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 80 mm dia. (medium) nominal bore for washout/ delivery main / welded with M.S. Plate 1.25 mm thick 150 x150 mm size etc. complete excluding cost of pipe.

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural etc. as required in grating frames, guard bar, ladders, railing, brackets gates and similar.

Carriage of sand by Mechanical Transport from source (to be identified by engineer in charge) to site of work /dumping place (To be identified by engineer in charge) including cost for loading and unloading.for an av. distance of 20 kms. and 500 mtr by head load

Carriage of stone aggregate (Crushed) upto 20 mm by Mechanical Transport from source (to be identified by engineer in charge) to site of work /dumping place (To be identified by engineer in charge) including cost for loading and unloading.for an av. distance of 20 kms and 500 mtr by head load

Carriage of Stone aggregate above 40mm (Crushed) by Mechanical Transport from source (to be identified by engineer in charge) to site of work /dumping place (To be identified by engineer in charge) including cost for loading and unloading.for an av. distance of 20 km. and 500 mtr by head load

Carriage of Steel by Mechanical Transport from source (to be identified by engineer in charge) to site of work /dumping place (To be identified by engineer in charge) including cost for loading and unloading.for an av. distance of 20 Kms and 500 mtr by head load

Carriage of Cement from division head quarter by Mechanical Transport from source (to be identified by engineer in charge) to site of work /dumping place (To be identified by engineer in charge) including cost for loading and unloading.for an av. distance of 20 km and 500 mtr by head load

Pipe Works: Providing , Laying and fitting of Rising main and Distribution system. Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10Sqm on plan, including dressing of sides and ramming of bottoms lit upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kind of soil

Providing and fixing of GI pipes complete with cost of G.I pipes / fittings on R/main & G/main / all types of pipe specials as per site requirement including handling of all type of carriages of material to the sites of work, interconnection at tapping point and delivery point with the exisiting system, (complete rate to be quoted by the Contractor) excluding trenching and refilling etc.

GI pipe 80mm dia (Medium)

GI pipe 80mm dia (Light )

GI pipe 65mm dia

GI pipe 50 mm dia

GI pipe 40mm dia

GI pipe 32 mm dia

GI pipe 25 mm dia

GI pipe 20mm dia

GI pipe 15mm dia

Filling available excaved earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, lead upto 50 m and lift upto 1.5mtr.

Providing and fixing 80 mm dia C. I. sluice valve/ Check valve as per specifications IS: 14846 for control purpose of different dias including joining material , bolts, nuts , washer, rubber insertions etc.

Earth work in excavation by mechanical means (Hydraulic excavation) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10Sqm on plan, including dressing of sides and ramming of bottoms lit upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kind of soil

Hand packing stones in wire crates excluding cost of crates and stones

Cost of Gabion crate

Supply of stone

Carriage of stone from source to site of work for an avg. distance of 20 km by mechanical transport

Filling available excaved earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, lead upto 50 m and lift upto 1.5mtr.

Carriage of crates from avg. 25 km by mechanical transport from nearest market

Providing and laying factory made chamfered edge cement concrete paver blocks in footpaths, parks, lawns, drive ways or light traffic parking etc. of required strength , thickness and size/ shape & size/ shape made by table vibratory method using PU mould , laid in required colour and pattern over 50 mm thick compacted bed of sand , compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layers through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern , finishing and sweeping etc. sand complete all 60 mm thick cement concrete paver block of M-35 grade with approved colour design and pattern

Installation of household connections( FHTCs )

Provision for cleaning of dug welll at Battal

Welding of joints by electric arc welding including testing and commissioning of joint incl. carriage of set and all other accessories including making arrangement for electric supply / arrangement for generator etc. complete

Providing and fixing gun metal gate valve with C.I wheel of approved quality (Screw end) 40 mm dia

Providing and fixing gun metal gate valve with C.I wheel of approved quality (Screw end) 50 mm dia

Providing and fixing gun metal gate valve with C.I wheel of approved quality (Screw end) 65 mm dia

Providing and fixing gun metal gate valve with C.I wheel of approved quality (Screw end) 80 mm dia

Making interconnection of Gi distribution branch with GI Main by providing and fixing tee, union incl. cutting and threading of pipe etc complete 25mm to 40mm dia.

Making interconnection of Gi distribution branch with GI Main by providing and fixing tee, union incl. cutting and threading of pipe etc complete 50mm to 80mm dia.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Dismantling manually/ mechanically including of serviceable material and disposal of unserviceable material within 50 mtr lead ( Bituminous road)

Dismantling of tile works in floor , roofs and laid in cement mortar including stacking of material within 50 mtr lead for thickness of tile above 25 mm

Providing, installation, operating and commissioning fully autommatic gravity feed chlorination plant based on microcontroller technology with automatic chemical infusion and proportionate dosing controller along with chemical detection system and variable pressure controller by incorporating the latest electronic digital technology including cost of providing chlorine dosing and other necessary materials for one year and operation , maintenance for a period of one year from the period of installation of inline chlorinator (Complete job) at tube well Dabri

Providing and installation of sign Boad with writing (8t x 10 ft) and writing and painting on walls with quotations, infrastructure details etc (150 sft)

Mechanical works:( At tube well Dabri) Design, fabrication, erection, installation, testing and commissioning of overhead gantary for extraction and lowering of submersible pump set. Providing and installation of water level sensor in LT control panel of submersible pump set to cut off the power supply in case of high of water in Sump Tank and providing and installation of water level sensors in LT control panels of HC pump sets to cut off power supply in case of low water level in the sump tank to protect dry running of pump sets. Outdoor electrification.

(At dug well Dabri) Providing, Installation, testing & commissioning of two nos. submersible pump sets of ISI marked reputed make as per IS 8034 having specifications 3000 GPH x 50 Mtrs. Head along with allied works

Design, fabrication, installation, testing and commissioning of one no. LT control panel with built in fault analyzer suitable for operation of 60 HP HC pump set. Earthing , Indoor and Outdoor electrification. Upgradation of 100 kva electric sub-station along with earthing of the sub- station.

M/S KOUSHAL SHARMA

M/s Narinder Singh