Provision of electrical concealed wiring works of new Power House building including electrical fitting and accessories at Chandrabhaga Lighthouse, Odisha

Supplying and fixing following size GI module box along with modular base & cover plate for modular switches in recess etc. as required.

2 Module (75mm * 75mm)

3 Module (100mm * 75mm)

4 Module (125mm * 75mm)

6 Module (200mm * 75mm)

8 Module (200mm * 75mm)

12 Module (200mm * 150mm)

Supply and fixing of metal box of following sizes in recess with suitable size phenolic laminated sheet cover in front including painting etc. as required.

100mmX100mmX60mm deep

150mmX150mmX60mm deep

Wiring of twin control light point with 1.5 sq mm FRSL pvc insulated copper cable single core cable in the existing surface/ recessed medium class conduit, 2-way modular switch, modular plate suitable GI box and earthing the point with 1.5 sq mm cable as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

10 Amp Switch

16/20 Amp Switch

3 Pin 10 Amp Socket outlet

6 Pin 16/20 Amp Socket outlet

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ hylam sheet including connections etc. as required.

Installation, testing, commissioning of wall bracket/ celling fittings of all sizes and shapes containing up to two GLS/CFL/LED surface/Led Tube light/False ceiling light fitting complete with all accessories including connection etc as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Up to 450 mm Sweep

Supplying and fixing suitable size GI box (4-M) with modular plate and cover in front on surface or in recess including providing and fixing 25A modular socket outlet and 25A, 2-M modular Starter including connection, painting etc as required.

Supplying and fixing of following sizes of medium class PVC straight conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25 mm straight PVC Conduit pipe.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed / PVC conduit as required.

3 x 1.5 sq. mm (15 coil of 90 mtrs.)

3 x 2.5 sq. mm (10 coil of 90 mtrs.)

3 x 4 sq. mm (04 coil of 90 mtrs.)

3 x 6 sq. mm (02 coil of 90 mtrs.)

Supplying and drawing co-axial TV RG-6 grade, 0.7 mm solid copper conductor PE insulated, shelled with fine tinned copper braid and protected with pvc sheath in the recessed pvc conduit as requited.

Supplying and fixing following rating, four pole 415 volt, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following ways surface/recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.

4 way (4 + 12), Double door.

Supplying and fixing following rating, four pole MCB, (three phase and neutral), 415 Volt in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 10A-4 nos, 20A-4 nos, 32 Amp- 4 nos

Double pole 32A

Earthing with G.I earth pipe 4.5 meter long, 40mm dia including accessories, and providing masonry enclosure with cast iron cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia GI wire in 15 mm dia G.I. Pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Exhaust fan , metal body, round-300 mm, heavy duty industrial type.

Exhaust fan , metal body, round-200 mm, Light duty domestic type.

Cast Iron manhole cover, 1 feet X 1 feet.

Indicator 1-Modular.

Ceiling fan 1200 mm sweep.

Wall revolving fan, 400 mm sweep.

4-feet, 20 watt LED Tube Light batten.

LED bulkhead fitting with IP55 protection, 12 watt.

Supply and fixing of 3-phase surge protection unit in DB with connection.

Supplying and fixing of 100 Amp, 440 volt Porcelain kit kat fuse unit handle type with three phase connection.

Insulation Tape 10-mtr roll.

16 Amp, 3-pin Top.

LED mirror light, 5-watt, 1-feet.

Angle holder. (B-22 base)

12 watt LED lamp, B-22 holder.

4 inch round/square hylam sheet of 4mm thick. (Round- 20 nos. and Square- 20 nos)

PVC round Junction box, 1'', 2mm thick (1 to 4 way). 1-way-20nos, 2-way-20 nos, 3-way-20nos. 4-way- 10 nos.

Fan Rod with fixing clamp. (3 feet to 6 feet as required= 8 nos.)

25 mm heavy duty thicker gauge rolled PVC conduit pipe for concealed wiring.

G.I fan box

Labour charges for laying of PVC pipes at the time of slab casting with provision of fixing GI fan box.(Approx 150 sqmtr slab area.)

Re-shifting charges of main 3-phase supply from existing quarter to new power house given by Odisha State Electricity Board (Including intermediate pole fixing if required and drawing of cable including laying).

M/S A.P.CONSTRUCTION

MS SUJATA ENTERPRISE

Dilip Kumar Basu

LUCKY ENGINEERING WORKS

MS VIDYANJALI