Painting of steel tubular pole with pole numbering, Grouting/ muffling of pole, Errection/ dismantling Erection of stay set ,440Volt Danger board and cradle guard of LT O/H Line From Water discharge point to Excavation Workshop at PEOCP Hzb Area.

Amount

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

ismantling of over head lines comprising of copper/ aluminium over head conductor, Cl. wire, cross arms, insulators etc. as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Erection of ACSR conductor of 7/2.11 mm to 7/3.00 mm diameter including binding etc. as required. K

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Providing and making steel pole collor with cement concrete ( 1 Cement : 3 Coarse sand : 6 stone aggregate 20 mm) of sepecified size and shape including from work. Plastering if required curing etc as required. ( volume of pole/pipe not to be deducted (37X0.5X0.5X01=9.25).

lettering on panel and pole numbering (cost of lettering 1 cm leter = 5.05, (8cmX17 letter/pole=136letter/pole=37x136= 5032Letter.

Erection of cradle guard as required.

Making of cradle guard by supplying 6SWG GI wire.

Painting of pole above 10.00 metre and up to 12.00 metre and channel,angles and bracket by applying single coat Red oxide and two coat Aluminium paint.

Providing and fixing of 440V danger board on the poles.

Total impact of GST for the purpose of CTC