Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6.0 LAccepted-Finance S O SH BHAWANI SINGH VPO BHRAIN TEHSIL BHUNTAR DISTT KULLU HP PIN 175125 | KULLU | HIMACHAL PRADESH | 175125 | 1 | Accepted-Finance OK | |
| 2 | 2₹6.6 L+₹60,884 (10.1%)Rejected-Finance | 2 | Rejected-Finance OK | |
| 3 | 3₹6.6 L+₹64,957 (10.8%)Rejected-Finance R O VILLAGE CHEWLA P O ROURI TEH DISTT SHIMLA 11 | SHIMLA | HIMACHAL PRADESH | 171001 | 3 | Rejected-Finance OK | |
| 4 | 4₹8.4 L+₹2.4 L (39.7%)Rejected-Finance H NO 80 10 GUPTA NIWAS MIA BEHAR KULLU H P 175101 | KULLU | HIMACHAL PRADESH | 175101 | 4 | Rejected-Finance OK |
Tender Value
₹4 L
EMD Value
₹8,000
Closing Date
7 Sept 2020, 11:00 amClosed
EOMCKULLU
MCKULLU
Construction of toilet at ward no 2 A.B Kullu
2020_UDDHP_40217_1
MCK/TEND/20/190
Open Tender
Civil Works
Item Rate
60 days
kullu
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
EO MC KULLU
₹8,000
6 Oct 2020
31 Aug 2020
8 Sept 2020
31 Aug 2020
7 Sept 2020
31 Aug 2020
Amount
Excavation in foundation in trenches etc. in earthwork lift upto 1.50m stacking the excavated soil not more than 3m clear from the edge of the exaction and then returning the stacked soil in 15cm layer when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering them disposing of all surplus excavted earth.PJ works.
Stone filing behind wall
Providing and laying cement concrete1:3:6 (1cement :3 sand :6 gradede stone aggregate 20mm nominal size)
Brick work using common brunt clay building bricks C.M.1:6 [1 cement:6 sand ] in foundation and plinth.
Providing and laying cement concrete 1:1/2:3 (1 cement:1/2sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding the cost form work & reinforcement for reinforced concrete work in.
Providing mild steel/for steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level-tor steel.
20mm cement plaster in two coats backing coats 15mm and finishing caots 5mm thick on rough side of brick/stone masonary walls for interior plastering upto floor 2 levele i/c arrises, internal rounded angles, chamfers or rounded angels not exceeding 80mm in girth and finished even and smopth C.M 1:6 (1 cement :6 sand)
6mm cement plaster in ceiling 1:4
providing formwork with steel plates 3.15mm thick welded with anle iron with frame 30x30xx5mm so as to give a fair finish i/c centering, shuttering and propping etc with wooden battens ballies, height of propping and centering below supporting florr to ceiling not exceeding 4m and remval of same for insitureinforced concrete and plain concrete work with all leads and lifts. Vertical surfaces such as wall (any thickness) partition and the like i/c attached plaster, buttreses,plinth and string courses and the like.(Slab) (b) Edges of slab (c) Vertical surface.
P/F panneled glazed or pnneled and glazed shutters for doors and windows i/c bright finished/black enamelled iron butt hinges with necessary screw 40mm thick 2nd class deodar.
P/F Anodised aluminium sliding door bolts anodixed transparent or dyed to require to colour and shade with bolts and nuts scres etc. complete 250x16mm.
P/F aluminium handles anodized transparent dyed to required colour or shade with n/screws etc. complete 125mm.
P/F aluminium tower bolts (barrel type) anodized transparent or dyed to required colour shade with n/screws etc.complete 200x10mm.
Applying priming coat over new wood and wood based surface after and i/c repairing the surface by thoroughly cleaning oil grease dirt other forgien matter sand papering and knotting.
painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint to give uneven shade i/c cleaning the surface of all dirt, dust and other forgien matter sand papering and stoping.qty same item no.
Distempering (two coats) with oil bound distemper a-of approved brand and manufacture of required shade on undercoated wass surfaces to give and i/c a priming coat with distemper primer of app.Brand and manufacture after thoroughly brushing the surface free from mortar dropping and other forien matter and also i/c preparing the surface even and paper smooth.
White glazwd tiles 6mm. thick in flooring,treads of step and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement :3 sand) finished with flush pointinbg in white cement.
White glazwd tiles 6mm. thick in skirting risesrs of step and dado 12mm thick cement mortar 1:3(1 cement :3 sand) and jointed with cement slurry.
Providing wood work in fiames of doors, windows, clerestory windows and other frames wrought ,frames and fixed in position. with designe approved by site engineer.
P/F vitreous indian wash, down/ water closet (European type WC pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe ion cement mortar 1:1 (Universal claset).
P/F 100mm size 'P'or 'S' trapfor water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 PVC.
P/F 100mm HCL floor traps of 100mm PVC
P/F PVC water storage tank with necessary fittings and connections (N.S)
P/F PVC pipe of soil waste 100mm size
Construction of inspection chamber of 800x800x1500mm size.
Providing GI Pipe 15mm die (class-B).
Pillar Cock(brass)
Providing Bib Taps (brass)
Providing Stone Cocks (brass)
Pit valve 1/" die
PVC Connections
Providing Flush cistern PVC
P/F PVC waste pipe
Providing & fixing PVC door bend
Providing & fixing PVC tee
MI union 15mm
Float valve
Providing and fixing urinal pot with all fitting
Providing and fixing wash basin with all fitting
Providing and fixing auto water sprarder with all fitting
GANESH KUMAR
KHEM RAJ
PANKAJ GUPTA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .