Supply Installation Testing and Commissioning of fire fighting and fire alarm system for New Godown at State warehouse Thalassery in Kannur District under NABARD-WIF Scheme

Amount

Supply,Installation,Testing & Commissioning of Horizontal, End suction, Top Discharge Back Pull out Design Centrifugal pump with standard construction with CAST IRON impeller with Gland Rope Packing arrangement coupled to squirrel cage, TEFC motor with GI Fabricated channel Base plate, Standard Lovejoy Coupling, GI Coupling Guard, Anti Vibration Pad Inclusive.1620 LPM @ 50 Mtr head. 30 HP , 2900 RPM Pump Classification: Fire Pump Casing Material: Cast Iron FG 260 Impeller Material: Cast Iron FG 260 Shaft Material: Carbon Steel Shaft Sleeve Material: S.S AISI 410 Counter Flange Material: Cast Iron Suction & Discharge Flange Rating: PN 16

Supply,Installation,Testing & Commissioning of horizontal, end suction, top discharge centrifugal pump of standard Construction with BRONZE Impeller GLAND ROPE PACKING ARRANGEMENT coupled to electric start, water cooled, Radiator type diesel oil engine with GI fabricated channel base plate, Standard coupling, GI Coupling guard with batteries, leads and fuel tank .Anti Vibration pads inclusive.1620 LPM @ 50 Mtr head. 51 HP , 1800 RPM Pump Classification: Fire Pump Pump Construction: Pump With Diesel Engine Component Materials Casing Material: Cast Iron FG 260 Impeller Material: Bronze LTB2 Shaft Material: S.S AISI 410 Accessories Base Frame & Coupling: Included, Battery, Diesel Tank, Presssure Gauge, Battery Charger. Suction & Discharge Flange Rating: PN 16

Supply,Installation,Testing & Commissioning of CENTRIFUGAL MONOBLOCK PUMP suitable for AC 3 Phase/415 Volts/50 Hz supply. Pump is of CI construction, CAST IRON Impeller, GLAND PACKED . Totally enclosed fan ventilated motor is capable of withstanding wide voltage fluctuation ranging from 300 to 440 volts.Anti Vibration pads inclusive 180 LPM @ 50 Mtr head , 7.5 HP Pump Classification: Fire Pump Casing Material: Cast Iron FG 260 Impeller Material: CF8 Shaft Material: Carbon Steel Shaft Sleeve Material: S.S AISI 410 Suction & Discharge Flange Rating: PN 16

Supply,Installation,Testing & Commissioning of CENTRIFUGAL MONOBLOCK PUMP suitable for AC 3 Phase/415 Volts/50 Hz supply. Pump is of CI construction, CAST IRON Impeller, GLAND PACKED . Totally enclosed fan ventilated motor is capable of withstanding wide voltage fluctuation ranging from 300 to 440 volts. 450 lpm @ 35 mtr head , 7.5 HP Product Configuration Pump Classification: Fire Pump Component Materials Volute Material: Cast Iron Impeller Material: Cast Iron Shaft Material: Carbon Steel

Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer coat over which two coats of signal red paint.- 150mm dia

Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer coat over which two coats of signal red paint. - 100mm dia

Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer coat over which two coats of signal red paint. - 80mm dia

Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer coat over which two coats of signal red paint. - 65mm dia

Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer coat over which two coats of signal red paint. - 50mm dia

Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer coat over which two coats of signal red paint. - 40mm dia

Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer coat over which two coats of signal red paint. -32mm dia

Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer coat over which two coats of signal red paint. - 25mm dia

Supply,Installation,Testing & Commissioning of GI Pipe Class ' B' medium grade with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrossive primer coat over which two coats of signal red paint. - 50mm dia (for drain line).

Supply,Installation,Testing & Commissioning of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 16 , teflon or nylong bushing, nitrile O-rings in standard mounting flanges with hand lever type with ISI mark.- 150mm dia

Supply,Installation,Testing & Commissioning of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 16 , teflon or nylong bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark.-100mm dia

Supply,Installation,Testing & Commissioning of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 16 , teflon or nylong bushing, nitrile O-rings in standard mounting flanges with hand lever type with ISI mark.-80mm dia

Supply,Installation,Testing & Commissioning of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 16 , teflon or nylong bushing, nitrile O-rings in standard mounting flanges with hand lever type with ISI mark.-50mm dia (for drain line).

Supply,Installation,Testing & Commissioning of Non Return Valve wafer type swing check valve, short pattern type with integral hinge pin disc , nitrilerubber O - ring seat and face sealing as per IS: 5312 PN 16, with ISI mark.- 150 mm dia

Supply,Installation,Testing & Commissioning of Non Return Valve wafer type swing check valve, short pattern type with integral hinge pin disc , nitrilerubber O - ring seat and face sealing as per IS: 5312 PN 16, with ISI mark. - 100 mm dia

Supply,Installation,Testing & Commissioning of Non Return Valve wafer type swing check valve, short pattern type with integral hinge pin disc , nitrilerubber O - ring seat and face sealing as per IS: 5312 PN 16, with ISI mark.- 80 mm dia

Supply,Installation,Testing & Commissioning of Forged brass Ball Valve cast iron body as per IS 5312 with ISI mark- 25mm dia

Supply,Installation,Testing & Commissioning of sprinkler 15 mm , 1/2" BSPT end connection having temperature 68 degree C made out of forged brass and SS decorative finish with temperature sensing tube, pressure with standing minimum 8 kg/cm2 , UL listed.-Pendent type

Supply,Installation,Testing & Commissioning of pressure switch having 1/4" BSP (F) connection IP:32 enclosure protection, pressure range 0 to 200 psi with necessary contact

Supply,Installation,Testing & Commissioning Of Pressure Gauge, 4" SS Pressure Gauge 0.To 16kg Cm Glycerin Filled 1/2" Bsp Male Bottoms Connection Including Fittings Etc.

Supply,Installation,Testing & Commissioning of Air release valve gun metal body 25 mm dia

Supply,Installation,Testing & Commissioning of Air cushion vessel made of GI sheet 200 mm dia in 1 mtr height, with automaic air release cock, 25 mm drain valve and shutt off with all necessary attachments.

Supply, fabrication, erection, testing and commissioning of the following floor mounted free standing cubicle type fully compartmentalised dust tight, vermin proof panel boards fabricated out of 16 SWG GI sheet and powder coated as per standards. The Board shall be completed with phase indication lamps in the incoming, suitably rated TPN Aluminium Busbars & earth bus of adequate capacity, double earth connection to all switches, internal rigid connection etc. (30HP S/D / 51HP Diesel Engine / 5HP DOL Jockey pump. (The necessary foundation suitable for cable entry, incoming power cable up to panel shall be provided by client and cabling between control panel and pumps sets shall be provided by contractor) Incoming: 125A TPN Isolator - 1No. TPN Busbar as per ISS RYB indicator set with control fuses - 1set Multifunction Meter with control fuses - 1set 100/5A CL1 CT - 3No. Auto-Manual Switch - 3No. Outgoing: 63A TPN Isolator with S/D starter, push buttons for 30 HP motor - 1sets.

Supply,Installation,Testing & Commissioning of 150 mm CI Strainer For safer operation of pump- 150 mm dia

Supply,Installation,Testing & Commissioning Hydrant Valve- Single Headed, S.S -as per IS: 5290 , ISI Marked oblique pattern Hydrant Landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with pvc blank cap & chain .

Supply,Installation,Testing & Commissioning of Fire Fighting Hose , Fire Hose - 63 mm ( 2 1/2") dia , 15 mtrs length bearing IS;636 type A with ISI Marked duly bounded with S.S couplings, 63 mm size, pair of male & female parts, instantaneous type , heavy duty bearing IS:903 with ISI mark.

Supply,Installation,Testing & Commissioning of Hose reel drum made of Mild Steel, Hose Reel Drum - as per IS:884 with 30 mtr length rubber hose of working pressure 7 kg/cm2 and shutt off nozzle range of jet flow 24 ltr/min, range of jet throw 6 mtrs with ISI mark.

Supply,Installation,Testing & Commissioning of Branch Pipe- S.S 63 mm dia short size branch pipe with 20 mm dia bore nozzle , as per IS:903 with -ISI Marked

Supply,Installation,Testing & Commissioning of Hose Box (cabinet) to accommodate one piece of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pipe. The cabinet is made of Fibre sheet with glass fronted hinged doors and lock.

Supply,Installation,Testing & Commissioning of Fire brigade Inlet connection fabricated from 150 mm dia GI Class B medium grade pipe comprising of four 63 mm dia gun metal male threaded non return valve. ( 4 Way )

Supply,Installation,Testing & Commissioning of Fire brigade Inlet connection for tank filling fabricated from 150 mm dia GI Class B medium grade pipe comprising of three 63 mm dia gun metal male threaded non return valve.( 2 Way for tank filling )

Supply,Installation,Testing & Commissioning of Fire Extinguisher dry chemical powder (ABC) Stored pressure type 4 kg capacity as per IS:15683 with ISI mark and with initial charger and installation brackets.

Supply,Installation,Testing & Commissioning of 4.5kgs. Carbon Di-oxide Type, Gas Conforming to ‘IS 15222’, Cylinder Conforming to ‘IS 7285’ & PESO Approved, Controllable Discharge Mechanism, Discharge Hose & Horn, as per ‘IS 15683:2018’ with ISI Mark Fire Extinguishers Wheel type Valve Operating Temperature:- (-) 20oC to (+) 60oC

Supply,Installation,Testing & Commissioning of 4 zone Automatic Fire Alarm Control panel conventional type micro processor based control made of MS sheet cabinet the powder coated, audio and digital visual display, circuit open short functions, test/evaqvation mode, silence and reset options, common and zone wise hooter supply outputs, fault and fire mode auxilary contacts with 24 DC volt out put zone circuits, operating 230 / 50 Hz AC volts.

Supply,Installation,Testing & Commissioning of Manual Call Point breack glass type red colour powder coated MS/ABS box fix on existing wall /frame,24/12 Volt DC operated push OFF/ON switching mechanism with inner, outer frame, operation label and necessary attachments.

Supply,Installation,Testing & Commissioning of Audio alarm hooter (sounder ) powder coated MS/ABS box fix on existing wall/frame, 24/12 Volt DC operated siren circuit with diaphram speaker, maxium sound 60 db intensity under stautory with necessary attachments.

Supply,Installation,Testing & Commissioning of Sealed Lead Acid Battery 12 V DC x 7 Ah for fire alarm control panel.

Supply,Installation,Testing & Commissioning of Fire Alarm Cable - armoud 2 c X 1.5 sq.mm flexible with ISI mark.

Supply,Installation,Testing & Commissioning of Optical type UL Listed with solid state design detector with imported base.- Smoke Detector

SIGNAGES - Led type -Supplying and installing in position LED "EXIT" sign boards of with battery backup.

SIGNAGES - Led type - Supplying and installing in position LED "Fire EXIT" sign boards of with battery backup.

Cabling charges for LED Signages .

Supplying and installing in position of self glowing " FIRE DUCT" sign board of size 100mm x 300 mm made of luminescent safely, rigid sheet in green colour, photo luminescent rigid sheet with two each hanging chains & necessarry supports to hang it on ceiling.

Supplying and installing in position of self glowing " FIRE PUMP ROOM " sign board of size 100mm x 300 mm made of luminescent safely, rigid sheet in green colour, photo luminescent rigid sheet with two each hanging chains & necessarry supports to hang it on ceiling.

Supply & installing in position laminated sheet of " FIRE EVACUATION PLAN " of suitable size fixed on wall & necessarry accessories to fix the plan on wall.

Preparation of necessary documents , forms,drawings, scheme , certificate etc.Preparation of As built drawings. Procuring approvals for the drawings, cordinating site inspection and statutory sanctions from the state fire authority for the installation.(Fee for challan not including.)

Annual Maintenance Contract for three years for all the fire fighting works including all equipements which should not exceed 15% of the total contract. Servicing and Testing of entire fire fighting & Fire Alarm System including renewa lof FINAL NOC( 4 visit /Year).AMC charges are payable at the end of every year against the GST bill submitted by the contractor and after reviewing the perfomance of the contractor

Allies Fire Systems Pvt Ltd