REPAIR TO ROAD AND ROAD FURNITURE UNDER AGE B/R-I AT GE(AF) NO 2 JODHPUR

Amount

M & L for preparing of existing/old black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the surface with gunny bags to remove all loose dust/dirt complete all as specified and directed

M & L for applying evenly a priming/tack coat with bitumonious primer VG-10 @ 5Kg per 10 Sqm using paving bitumen complete all as specified and as directed.

M&L for bituminous premix semi dense asphaltic concrete 30mm consolidated thickness using paving bitumen with 5.5% binder by weight of total mix, rolled and compacted with 8 to 12 tonne power roller required chamber and gradient complete all as specified and directed Note :- (i) In case the binder contents by weight of total mix is less than 5.5% as per actual design mix (paving bitumen VG-30). Price adjustment shall be made as per average rates of all paid voucher for bitumen pertaining to this work. If the total binder contents as per design mix is more than 5.5%, no price adjustment shall be made for the same. (ii) Job mix formula for Semi dense asphaltic concrete shall be obtained from the institutions specified here-in-after prior to commencement of work and shall be got approved from the GE.

M & L for repair to pot holes, not exc. 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25mm in depth, making good by applying tack coat with bituminous primer at 5 Kg/10 Sqm, putting is premix as specified for thin bituminous carpet (2 cm thickness) well rammed and sealed with binder 9.8 kg/10sqm,binded with (0.09 cum stone chippings of 6.3 mm size) again well rammed (including supply of premix binder and sand) depth of pot holes not exc 30mm independent pot holes complete all as specified and directed. Note:- bitumen used in the work shall be paving bitumen any penetration.

M&L for marking 2.5 mm thick centre line, stop line, dashes, arrows, brackets & similar work exc 10 cm width or girth on road surfaces as per IRC pattern with thermo plastic paint of approved quality & make with 8% glass beads laid at temperature 160 C with a special applicator machine complete all as per manufacturer's instructions & traffic diversion arrangement .

S&F in repair solar stud of colour red/green/yellow of size 120mm x 120mm x 25mmshank 60mm) with aluminum alloys shell construction, 100% water proofing design to Ip65, high effeciency monocrusteline solar panel 2.4V/0.3 watt, flesh rate 2Hz, bearable weight 10 Ton approx, six superbright LED with 10,000 to 18,000mcd millicandela, model- Road star & DA 110 (DHRUV) Dark eye / 3M / Green Light.

Supply and fixed in repairs “cat eye” reflective road stud/Cat eye,s of size 100mm x 100mm x 20mm moulded in ABS PC alloy with PMMA lens reflector complete and fixed all as per manufacturers instruction and all as directed Make:- Road star / Dark eye / 3M / Green Light.

S&F in repair traffic Mirror factory made 800 mm dia made by plastic icluding necessary fixing arrangements incl holding post, excavation , PCC etc complete as directed. Make:- Road star/ Dark eye / 3M / Green Light.

S&F in repair traffic Mirror factory made 600 mm dia made by plastic icluding necessary fixing arrangements incl holding post, excavation , PCC etc complete as directed. Make:- Road star/ Dark eye / 3M / Green Light.

S & F in repair solar DELINEATOR model DA112 with following technical specification (four ultra bright flashing LED specifical base for mounting one cone,pole etc, high quality reflective solar panel to maximize sun aborption, operating time 3-4 consecutive days (with full charge ) fixed on 45mm dia MS pipe of 600mm total height, duly powered coated,embeded in PCC (1:2:4) 150x150x300 mm size complete all as specified and directed. Make:- Road star/ Dark eye / 3M / Green Light.

S&F in repair metal tubular deleneator made out of 45mm dia MS Pipe of 600mm total height, duly powdered coated and 100mm dia high quality and durable glass reflector made of top quality weather resistance plastic material (thermo plastic polyester clastomer), 3 bands of green/red/yellow reflactor of size 25mm wide strips with metal jalli for reflector protection, embeded in PCC (1:2:4) 150 x 150 x 300mm size, fixed in repairs complete all as specified and directed. Make:- Road star/ Dark eye / 3M / Green Light.

Demolitionofcement concrete (unreinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified.

M&L 100 mm thick cement concre type D-2,1:4:8 (40 mm graded stone aggregate etc. complete all as specified .

M&L sand filling under floors or in foundation including watering and consolidation etc. complete all as specified .

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade made in rubber moulds/rubrised type with scratch proof lacquer coating on top surface with gray cement and pigment. Make : NITCO / MAHTAB TILES INDORE / SWASTIK / PAVIT / ULTRA TILES / PAVCON / SUKHI

M&L for Pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggragate ) block masonry with solid blocks as in kerb stones exc. 10 cm in width and setting in mortar, 1:6 complete all as specified and directed. Including necessary excavation & removal up to n.exc 50.

BAGHELA CONSTRUCTION

JANGID BUILDERS

Habib Traders