Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.7 LAccepted-Finance | L1 | Accepted-Finance LOWEST | |
| 2 | L2₹23.5 L+₹1.8 L (8.30%)Rejected-Finance | L2 | Rejected-Finance HIGHEST | |
| 3 | L3₹24.0 L+₹2.3 L (10.6%)Rejected-Finance PLOT NO 28 B NAHAR SINGH JI KA HATTA BHATI CIRCLE RATANADA JODHPUR RAJ 342011 | JODHPUR | JODHPUR | RAJASTHAN | 342011 | L3 | Rejected-Finance HIGHEST | |
| 4 | L4₹24.1 L+₹2.4 L (11.2%)Rejected-Finance | L4 | Rejected-Finance HIGHEST | |
| 5 | L5₹25.6 L+₹3.9 L (17.9%)Rejected-Finance | L5 | Rejected-Finance HIGHEST |
Tender Value
₹19 L
EMD Value
₹38,000
Closing Date
8 May 2019, 5:00 pmClosed
CWE (ARMY) JODHPUR
Military Engineer Services Commander Works Engineers (Army) Multan Line Jodhpur-342010
PROVN OF PROJECT STORE ROOM, SOLAR GENERATING PLANT AND ARBORICULTURE OF OFFICER ACCN FOR HQ CE JODHPUR
2019_MES_242368_4
CWE(A) JODH/SKG-133
Open Tender
Civil Works
Item Rate
152 days
UNDER GE SHIKARGARH
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE SHIKARGARH
₹38,000
Yes
16 Feb 2021
2 May 2019
9 May 2019
2 May 2019
8 May 2019
2 May 2019
Amount
M&L for brickwork with flyash bricks, straight or curved on plan exc 6m mean radius, built in 1:6 CM complete all as specified & directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 incl finished the surface even and smooth without using extra cement.
M&L for rough plaster 10mm thick on fair faces of brick work or concrete surface in CM 1:6 all as directed by Engr-in-Charge.
M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound finished including the surface even and smooth without using extra cement.
M&L for three coat of white wash to newly plastered surfaces of walls including preparation of surfaces.
M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of cement based primer complete all as specified.
M&L for machine cut stone slab flooring 20-25mm thick laid over and incuding 15mm thick cement screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.
M&L for machine cut stone slab flooring 20-25mm thick laid over and including 10mm thick backing coat of 1:4 in riser of steps, skirting and pillar etc and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.
M&L for 75mm thick PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in sub bases all as specified.
M&L machine pressed precast conctete interlocking paver block (Rubber moulded double lacquer polish finish) any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade incl & over 25mm thick sand cushioning complete all as specified and directed.
S&F of pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strice plate etc complete all as specified & directed.
S & F, 40mm flush shutters, solid core construction, with block board core and plywood face pannels, commercial type on both sides complete all as specified & directed.
S&F factory made box windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded.
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane.
S&F Aluminium handle, cast type, anodiesed of size 150 mm & fix to shutter complied all as specified.
S&F Aluminium anodised, barrel tower bolt of extruded section and fix of length 200mm
S&F 250 mm long aluminium alloy, anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified & diercted by Engineer-in-charge.
M&L for preparing new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer
M&L for preparing new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
M&L for reinforced cement concrete 1:2:4 Type B-1 using 20mm graded stone aggregate as in shelves, chajjas & similar items complete all as specified & directed.
Formwork to sides & soffits of RCC shelves etc for rough finished surface of concrete.
M&L for mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
All as per item No 22 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified & directed.
M&L for providing cement concrete 1:2:4 Type B1 (using 20mm graded stone aggregate) as in lintels, lintel bands complete all as specified & directed.
Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.
M&L for Gypsum Board 12mm thick in ceiling fixed with screw all as per manufacturer's instructions
M&L for two coats of distemper oil emulsion on gypum board ceiling including preparation of surfaces complete all as specified & directed.
M&L for concealed point wiring complete withmultistrnaded copper conductor 1.5 sqmm size PVC insulated FRLS unsheathed cable 1100 volt grade, confroming IS 694 & color code in conduit system of wlring, drawn in including medium grade PVC conduit suitable capacity dia concealed , including cutting chases, finishing of slote by means of cement mortor making good to the existing surface of the wall & touching with the existing colour of wall with two coats and making food disturbed surfaces complete, sunk in pressed steel terminal boxes of required size not less than 1.6mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unshethed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified. One Light/Fan point controlled by one way switch
All as per item No 28 herein befor One 5amp socket wiring on same board
All as per item No 28 herein befor One 5AMP Socket wiring on independent board
All as per item No 28 here-in-before but 4 sqmm copper conductor FRLS insulated mulistrand cable for 6/16 Amps socket on independent board and provn of 4 sqmm copper FRLS PVC insulalted earth wire as earth contunuity wire connected to common earth earth dolley complete all as specified and directed.
Supply and fixing switch piano flush type, ISI marked 5 Amps single pole one way.
Supply and fixing switch piano, ISI marked 15/16 Amps one way 240 volts
Supply and fixing socket outlet, ISI Marked 2 in 1 multi pin 5 Amps flush type universal.
Supply and fixing socket outlet, ISI Marked 2 in 1, 3 pin, 5 and 15 Amps socket outlet
Supply ans fixing ceiling rose on PVC board size 65 x 50mm three terminal
fixing only tube light fitting 20 watt LED batten with extruded aluminium housing in 4 feet length with in Built LED strip, LED shall be having LM80 complied as per L70 standard leds with 6000-6500K, CCT, Maximum power consumption shall be 20 watt with min, 1800 system lumens, drive with voltage range of 150-270 AC and DC output complete all as specified and directed.( Note LED 20 watt fitting complate shall be issued under schedule 'B' free for fixing only)
S&F conneting and commissioning of walll light fixture 40 watt LED, IP-66 protected ingle plece Die-cast aluminiur housing and heat sink havingheat resistive thoughned glass at bottom individual LED shall be having LM-80 complied as per L70 standard LEDs with 5700-6000K CCT, Optics materials. Maximum Power consumption shall be 35w with min 3500 system lumens, 4k surge protection voltage range of 150-270AC. Driver power factor shall be 0.95 and above with THD less than 10% including 25mm light grade pipe and MS clamp with nut & bolt fix with wall complete all as specified and directed.
M&L for sub main wiring with PVC insulated but unsheathed 2x4 sqmm single core multi stranded copper conductor cable passing through and in and in and incl 25mm PVC conduit open/concealed as per site requirement, making good the disturbed surface with and incl 1x4 sqmm single core copper conductor cable PVC insulated and unsheathed as earth wire including taking down unserviceable wiring. Note:- two run of 4 sqmm and one run of 4 sqmm cable including one run of PVC conduit will be measured as one length.
Supply, fixing, connecting & testing metal enclousers double door, single pole and netural, 4 way DBs for using MCBs/MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete all as specified and directed. Note:- Rates are deemed to be included for flushing in walll concealed complete making good and matching existing surface.
Supply and fixing MCB SP 6-30 Amp 240 Volts
Supply and fixing MCB SPN, 16/32/40 Amp, 240 Volts
Supply installation Testing and commissioning PV Modules Mono Crystalline Solar Modules 288 Wp(Minimum) ,with suitable quantity of Cells, Voc : 45.0V5,Isc:8.08A ,Vmp:36.15, Imp :8.30, Efficiency not less than 15.5% , Tempered Glass thickness 4.0mm ,Junction Box IP65,4T with 3 Diodes, Make : Waree/Tata /Vikram Note: (i) Cell used in modules shall be made in India and in approved list of MNRE. (ii) PV module shall comply with standardApporvd by MNRE. (iii) Contractor shall submit PID test report from company.
Supply installation of testing Off Grid Inverter Comprises of following:- 3 Phase Inverter of 10 KW,415VAC,50 Hz Capacity ,having inbuilt isolation transformer with separate MPP Tracker. (165-200v) ,Surge protection devices having efficiency 92-94% ,Graphical Displays + Led Suitable for ambient temperature -0 to +40 Degree centigrade, Protection IP65, Fuse protection DC input Plus and minus make :- Enertech /sukam /Neowatt/ Lunminius
Supply, installation of AJB Suitable array junction Box to connect 2 String of panels IP 65 Protection, 1000v DC SPD Typell ,With MC-4 connectors, Earhing Gland with terminals block Makes for internal components : Hansel/Connectwell/OBO/lumberg
Supply of febrication of Structure To support the PV Modules ,Well designed non metallic GRP Material has to be used with glass content min 60% made with special polymeric Resin with resistance to saline water,Air and acidic fumes, Life Span :25 Yrs ,Tensile Strength and Flexural Strength should not reduce more than 7% aftr 1000 hrs exposure to accelerated UV ,Tensile Strength : Min 300N /MM^2,Flexural Strangth : Min : 300N/mm^2, Compressive Strength : Min 150N/mm^2,shear Strength : Min : 20N /mm^2, Barcol Hardness Min 50, Specific Grevity :1.8-2.0 designed to handle wind speed of 170km/Hr ,with Suitable leak proof mounting fasteners and SS Nut Bolts and Washers.
Supply & installation of Battery MNRE approved 12v 200AH ,C10 Soler Gel batteries with deep discharge 80% DOD with working operating temperature range (-)10 oC to (+) 55Oc . Make : Luminious/ Seva /Exide/Sukam/sfsonic.
Supply and laying Cables and wires. 4Sqmm Weather proof DC Cable
All as per item No 48 abvoe but 6 Sqmm 4 Core Flexible Copper Cable
All as per item No 48 abvoe but 16 Sqmm,3.5 Core AYFY Cable. Make : Polycab/Finolex/Havells. (item No 48 to 50).
M&L earthing complete with galvanished steel earth plate electrode 60x60cmx6.00mm burried directly in ground level with top edge of earth plate at a depth not less than 1.5m below ground level connected to and including glavanised iron wire 4mm dia as earthing lead by means of bolts, nuts, check nuts and washers ete made of GI and connected to earthing test point all as shown in electric plate No 3 of SSR indicated and testing on completion including exeavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber PCC 1:2:4 type, B-1 rein force with welded steel wire fabric (AMP) weight not less than 4 Kg/Sqm, funnel with GI watering pipe of 20mm bore medium grade, wire mesh and lugs, GI protection pipe of 15mm bore light grade 7.5m long test point etc complete
Arboriculture Supply only of Compost manure incl loading unlaoding & transportation & stacking at site complete . The compost shall be of uniform texture relatively dry of dark brown or black color & should have an non offensive earth like odour. It shall be nutrient rich soil like material created by the biological decomposition of organic material such as vegetative debris & live stock manure.
Supply only Urea / Ammonium Sulphate
Supply only Bone Meal
Supply only Potassium Sulphate / Murate of Potash
Supply only insecticide/herbicide of approved make Chloropyriphos 35%EC or Monocrotophos 30% EC
Supply only of good earth (sand) from outside MD Land free from kankar, stones, cobbles,Moorum, shingle, Rocks building rubbish etc of all kinds & suitable foragricultuer/arboricultuer purpose. The ph of the soil brought shall be of the range 6 to 8.50. (The net measurement of the compost manure shall be arrived at by reducing the actual stack measurements by 20%).
Supply & planting of trees at desired distances in rows or other patterns to provide a green cover to the area in the following stages. (a) Removing the stones, cobbles, boulders, vegetation etc from the excavated soil & mixing the balance excavated earth with a mixture of good earth & compost manure ( Supplied vide item no 52 & 57 above) mixed @ 4:1 & filling the mixture so obtained in layers in the excavated post hole aroud the sapling Together with watering & supporting the plant/tree sapling with a bamboo /wooden stake & tieing with two ties all as directed for the following tree/plants (b) Excavating pits of size 75 cm dia & depth 75-80 cm taking out the soil & keeping aside . Hingot Ht of Sapling 1.20 to 1.50 m when planted
All as per item No58 herein before Ashoka Tree ( polyalthai longifolia ) Ht of Sapling 1.20 to 1.50 m when planted
All as per item No 58 herein before Neem Ht of Sapling 1.20 to 1.50 m when planted
Supply & planting ofshrubs/hedges & climber plants at desired distances in rows or other patterns to provide a green cover to the area in the following stages.(a) Excavating pits of size 45 cm dia & depth 45-50 cm taking out the soil & keeping aside .(b) Removing the stones, cobbles, boulders, vegetation etc from the excavated soil & mixing the balance excavated earth with a mixture of good earth & compost manure( Supplied vide item no 52 & 57 above) mixed @ 4:1 & filling the mixture so obtained in layers in the excavated post hole aroud the sapling Together with watering & supporting the plant/tree sapling with a bamboo /wooden stake & tieing with two ties all as directed for the following shrubs/hedge/climbers :- Bougainvillea Ht 45-60 cm when planted
All as per item No 61 herein before Kaner Ht 45-60 cm when planted
All as per item No 61 herein before Scarlet Bush Ht 45-60 cm when planted
All as per item No 61 herein before Oleander Ht 45-60 cm when planted
Prep of the Thavlas ( dressed pits for trees) of size 75 cm dia & upto a depth of 10 cm from top by upturning the soil for aeration removing weeds/stones kankars if any & flooding the pits with water complete & removal of the ubbish outside def land. ( this operation shall be carried after 30 days of the planting of the tree/sapling .
Supply & fixing tree guards 45 cm dia and 1.50 m high fabricated with 3 No. FI(of size 35x3mm at bottom & 25x3 in the middle & top) welded with MS welded mesh of wt not less than 4 kg/sqm & 3 legs of 12 mm dia MS bars 400 mm long with 02 coats of syn enamel paint over a coat of red oxide primer.
S&F HDPE 6 Kgf/ cm2 pipe in trenches including fittings complete all as specified & directed. 40 mm dia
All as per item No 68 above but 25 mm dia
All as per item No 68 above but 15mm dia
M & L for Stop valves,40mm dia, UPVC suitable for HDPE Pipe, screwed, high pressure, with crutch or butterfly handle, errds for iron scrweed both pipe or for unions and fixed.
All as per item No 71 above but 25mm dia
Excavation in trenches n. exceeding 1.5m wide and not exceeding 1.5 mtr in depth for laying cable etc and getting out in any type of soil.
Returning and fitting in and including spreading levelling watering and well ramming in layer n.exc 25mm thick in soil.
Removal of excavated soil n exc 50 m & as directed
PRATAP CHOTHU RAM
BEYLIM INFRA
Mahesh Dave
Shri Ram Traders Co
M/S gayatri construction company
vinayandsons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .