Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.8 LAccepted-AOC | 1 | Accepted-AOC low | |
| 2 | 2₹2.9 L+₹10,004 (3.53%)Rejected-Finance NPDEVIGARH | 2 | Rejected-Finance high |
Tender Value
Refer Docs
EMD Value
₹5,682
Closing Date
24 Feb 2021, 11:00 amClosed
XEN
XEN ROPAR
Estimate for painting and providing water arrangement for partial converting of abundant building into rest house.
2021_WR_60122_1
12/22-A/2020-21
Open Tender
Civil Works - Others
Item Rate
90 days
PAYAL
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Yes
₹5,682
Yes
11 Jun 2021
17 Feb 2021
24 Feb 2021
17 Feb 2021
24 Feb 2021
17 Feb 2021
Amount
SCRAPING ( CEMENT PLASTER)
SCRAPING OF COLOUR WASH
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade.
Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two coats to give an even shade.
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish
12.5mm thick cement plaster 1:4
Boring for hand-pump in clay fitting strainer and pipe. ( Exceeding 30 m )
Hand pumps (Pulling out pipe and filters)
Hand pumps (Lowering pipe in the hole up to 40mm dia)
Hand pumps (fixing head including clamps and handle)
Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.(110mm O/D PIPE OF 6KGF/SQCM)
Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. 20mm i/d
Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. 25mm i/d
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. c) 25mm i/d G.I. Union
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. b) 20mm i/d G.I. Union
Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. b) 20mm i/d Gun Metal peet valve heavy pattern.
Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. c) 25mm i/d Gun Metal peet valve heavy pattern.
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.( C.P.brass 15mm Concealed stop cock with flange)
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.( C.P.brass 15mm Angle valve without flange)
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition.( Size 75mm x 75mm)
Providing and fixing in position automatic brass ball valves in tanks.( 20 mm I/D)
Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.
Any Other Item
THE KHERI MANIA CO OP L AND C SOCIETY LIMITED
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .