Watch And Ward of tathed X-Regulator, CAD colony CR/MC 17 to 39.50 km. For Year 2026-27

Operation & controlling including watch & ward of Head / Cross regulator gates for Feeder/main canal / distributory. Appointing one opertor cum gauge reader per day for (24 hr)i) Where ever there is head cum cross regulator, no separate staff would be taken.ii) If two head/ cross regulator are within 1 km reach, no separate staff would be taken.

Watch & ward of office building after office hours.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work

Random rubble stone masonry (using R.R. stone where 75% stones to be not less than 15 cm in size in any direction and weighting not less than 23 kg) for foundation including curing with all leads of all construction materials including curing etc. complete. in cement sand mortar 1:4. Add extra over item no. 1 to 7 for(a) Masonry work in superstructure

Plaster in cement sand mortar 1:4 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness: :20mm thick

Stone patties edges hammer dressed including all lead and lift. Length up to 2.50 m to 4 m and thickness 80 mm and above.

Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar l:3 ( I cement : 3 coarse sand) and making good the joints excluding the cost of centering, shattering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm

Providing and laying of paver block as per IS 15658 : 2006 (Indian standard for precast concrete block for pavingspecification) and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement)M-30, 60 mm thick to be used in non traffic areas like buildingpremises, monument premises, land scapes, public gardens/ park, domestic drives, paths and patios, Embankment slopes,sand stabilization Area etc.( As per table 1 of IS 15658:2006. Category „B‟ Denated only two side like I,Z,T shape etc. as per IRC SP 63:2004

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membran @ 0.40 Itr/sq.mt. by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane. 3 mm thick