Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹51.2 LAdmitted-Finance NEAR EAST WEST PUBLIC SCHOOL SHAHABAD GATE RAMPUR U P | ₹51.2 L | L1 | Admitted-Finance |
| 2 | L2₹52.7 L+₹1.5 L (2.94%)Admitted-Finance CC 1 BOOTH NO 8 JANTA BHAWAN ROAD SIRSA SIRSA HARYANA 125055 | SIRSA | HARYANA | 125055 | ₹52.7 L+₹1.5 L (2.94%) | L2 | Admitted-Finance |
| 3 | L3₹54.0 L+₹2.8 L (5.39%)Admitted-Finance NEAR SHIV SHAKTI DHARAM KANTA SHIV PURAM FULSUNGA RUDRAPUR U S NAGAR UTTARAKHAND | UDAM SINGH NAGAR | UTTARAKHAND | 244712 | ₹54.0 L+₹2.8 L (5.39%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | ASHOK KUMAR AND CO L2 | TNK Electricals L1 | PERFECT ELECTRICALS AND ENGINEERS L3 |
|---|---|---|---|---|---|---|
| 1.00Work ( Annexure - I ) | ||||||
| 1.01 | Cartage of S.T. Pole S.P. -55 from store centre Haldwani/Rudrapur UPCL to dump store centre approximately distance 5 1 to 70 KM. including loading into truck at store centre, unloading safely at dump store & site Store. | 391 | Nos. | 586 ₹2,29,126 | 578 ₹2,25,998 Lowest | 590 ₹2,30,690 |
| 1.02 | Cartage of S.T. Pole S.P. -72 from store centre Haldwani/Rudrapur UPCL to dump store centre approximately distance 5 1 to 70 KM. including loading into truck at store centre, unloading safely at dump store & site Store. | 15 | Nos. | 875 ₹13,125 | 865 ₹12,975 Lowest | 880 ₹13,200 |
| 1.03 | Cartage of33KV. VCB, Bus, Line isolator, CT, PT, Control Panel from store centre Haldwani/Rudrapur UPCL to dump store centre approximately distance 5 1 to 70 KM. including loading into truck at store centre, unloading safely at dump store & site Store. | 15 | Nos. | 3,040 ₹45,600 | 2,990 ₹44,850 Lowest | 3,190 ₹47,850 |
| 1.04 | Cartage of Other Line material. from store centre Haldwani/Rudrapur UPCL to dump store centre approximately distancedistance 5 1 to 70 KM. including loading into truck at store centre, unloading safely at dump store & site Store. | 450 | Qtls. | 456 ₹2,05,200 | 448 ₹2,01,600 Lowest | 464 ₹2,08,800 |
| 1.05 | Erection of following STP SP-55 /STP SP-72 Single pole support( Supplied by the department) on 300x300x75 mm stone pad including excavation of pits, 0.6x0.6x2.15Mtr. & grouting of pole in C.C. ratio 1:4:8 in size 0.45x0.45x1.8 mtr including cost of all material (sand, cement and stone grit ) required for the work, construction work with fitting of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge. | 284 | Nos. | 3,540 ₹10,05,360 | 3,498 ₹9,93,432 Lowest | 3,590 ₹10,19,560 |
| 1.06 | Erection of following STP SP-55/STP SP-72 Double pole support( Supplied by the department) on 300x300x75 mm stone pad including excavation of pits, 0.6x0.6x2.0 Mtr. & grouting of pole in C.C. ratio 1:4:8 in size 0.45x0.45x1.8 mt including cost of all material (sand, cement and stone grit ) required for the work, construction work . with fitting of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge. | 34 | Nos. | 7,535 ₹2,56,190 | 7,495 ₹2,54,830 Lowest | 7,585 ₹2,57,890 |
| 1.07 | Erection of following STP SP-55/STP SP-72Tri pole support( Supplied by the department) on 300x300x75 mm stone pad including excavation of pits, 0.6x0.6x2.0 Mtr. & grouting of pole in C.C. ratio 1:4:8 in size 0.45x0.45x1.8 mtr including cost of all material (sand, cement and stone grit ) required for the work, construction work . with fitting of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge. | 6 | Nos. | 10,685 ₹64,110 | 10,485 ₹62,910 Lowest | 10,785 ₹64,710 |
| 1.08 | Erection of following STP SP-55/STP SP-72 Four pole support( Supplied by the department) on 300x300x75 mm stone pad including excavation of pits, 0.6x0.6x2.0 Mtr. & grouting of pole in C.C. ratio 1:4:8 in size 0.45x0.45x1.8 mtr including cost of all material (sand, cement and stone grit ) required for the work, construction work . with fitting of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge. | 9 | Nos. | 12,695 ₹1,14,255 | 12,495 ₹1,12,455 Lowest | 12,785 ₹1,15,065 |
| 1.09 | Muffing of S.T. Poles and making kicking block of size ( Height 0.45x0.45 mtr round) above ground level on the pole in 1:2:4 CC including cost of drilling holes and cutting as required and cost of all material (sand, cement and stone grit ) required for the work, construction work . with fitting of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge. | 406 | No. | 1,370 ₹5,56,220 | 1,320 ₹5,35,920 Lowest | 1,410 ₹5,72,460 |
Tender Value
Refer Docs
EMD Value
₹1.1 L
Closing Date
24 Oct 2020, 3:00 pmClosed
Superintendking Engineer
SE,EDC,Rudrapur
Construction of 33KV.Line Haldi to Khankat Sub Station andmaintenance of old 33KV Jhankat feeder under EDD, Khatima.
2020_UPCL3_26205_1
EDC(USN)22/2020-21
Open Tender
Electrical Works
Item Rate
180 days
Khatima
Pl. refer tender documents.
3 documents required · 3 mandatory
₹5,900
SE,EDC,Rudrapur
₹1.1 L
19 Nov 2020
19 Sept 2020
26 Oct 2020
19 Sept 2020
24 Oct 2020
19 Sept 2020
Amount
Work ( Annexure - I )
Cartage of S.T. Pole S.P. -55 from store centre Haldwani/Rudrapur UPCL to dump store centre approximately distance 5 1 to 70 KM. including loading into truck at store centre, unloading safely at dump store & site Store.
Cartage of S.T. Pole S.P. -72 from store centre Haldwani/Rudrapur UPCL to dump store centre approximately distance 5 1 to 70 KM. including loading into truck at store centre, unloading safely at dump store & site Store.
Cartage of33KV. VCB, Bus, Line isolator, CT, PT, Control Panel from store centre Haldwani/Rudrapur UPCL to dump store centre approximately distance 5 1 to 70 KM. including loading into truck at store centre, unloading safely at dump store & site Store.
Cartage of Other Line material. from store centre Haldwani/Rudrapur UPCL to dump store centre approximately distancedistance 5 1 to 70 KM. including loading into truck at store centre, unloading safely at dump store & site Store.
Erection of following STP SP-55 /STP SP-72 Single pole support( Supplied by the department) on 300x300x75 mm stone pad including excavation of pits, 0.6x0.6x2.15Mtr. & grouting of pole in C.C. ratio 1:4:8 in size 0.45x0.45x1.8 mtr including cost of all material (sand, cement and stone grit ) required for the work, construction work with fitting of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.
Erection of following STP SP-55/STP SP-72 Double pole support( Supplied by the department) on 300x300x75 mm stone pad including excavation of pits, 0.6x0.6x2.0 Mtr. & grouting of pole in C.C. ratio 1:4:8 in size 0.45x0.45x1.8 mt including cost of all material (sand, cement and stone grit ) required for the work, construction work . with fitting of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.
Erection of following STP SP-55/STP SP-72Tri pole support( Supplied by the department) on 300x300x75 mm stone pad including excavation of pits, 0.6x0.6x2.0 Mtr. & grouting of pole in C.C. ratio 1:4:8 in size 0.45x0.45x1.8 mtr including cost of all material (sand, cement and stone grit ) required for the work, construction work . with fitting of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.
Erection of following STP SP-55/STP SP-72 Four pole support( Supplied by the department) on 300x300x75 mm stone pad including excavation of pits, 0.6x0.6x2.0 Mtr. & grouting of pole in C.C. ratio 1:4:8 in size 0.45x0.45x1.8 mtr including cost of all material (sand, cement and stone grit ) required for the work, construction work . with fitting of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.
Muffing of S.T. Poles and making kicking block of size ( Height 0.45x0.45 mtr round) above ground level on the pole in 1:2:4 CC including cost of drilling holes and cutting as required and cost of all material (sand, cement and stone grit ) required for the work, construction work . with fitting of all accessories upto energisation, etc complete work as per RESPO Specification and as per direction of Engineer In Charge.
Erction & Grouting of Stay rod in to pit including excavation of earth of size 0.6x0.6x1.5 Mtr. complete as per RESPO drawing no. RES-16 with stay rod 16x1800 stay wire 7/8 SWG( Stay set and stay wire will be provided by the department ) and grouting of stay in pit with CC 1:4:8 in bottom of pit in size 0.60x0.60x0.60 Mtr. and earth filling complete in all respect with cost of cement , sand & stone ballast and fixing of all other items with stay clamps, stay elbow including proper nozelling etc. required for proper completion of work, as per direction of Engineer- In- charge.
Laying, Spreading,Stringing and sagging of 33KV. Line single circuit on ACSR Dog conductor with fitting of all accessories with binding & jumpering in canal section complete work as per direction of Engineer- In- Charge.
Making Special type separate eartghing for structure CT/PT, LA, VCB digging 3x4x12 feet deep pit at corner of Switch Yard with duly proovided 1No. Coal Iron earth plates of size 18"x18"x1/2"jointing them with 6" long bolt duly covered with laying of soft coat 60Kg. and salt 20Kg( Total 180Kg) connecting them with the main erathmat. The earth plates hall be connected with 35x6mm. GI Strip and GI Strip shall be laid upto the body separetely complete job as per direction of Engineer-In-Charge.
Fixing of brackets in 33KV. Line as per direction of Enineer-In-Charge.
Fabrication and Fixing of channell, brac ing complete for double pole and service brac kets of M.S. Channel 125x65mm mm. with cutting drilling of holes and fabrication work including fixing of channel as required by Engineer in Charge as per requirement of site .
Construction of Terminal Gentry Fabrication and Fixing of channell,125x65x8mm. & Fabrication and Fixing of M.S. Angle 50x50x6mm , complete work , as per direction of Engineer - In- Charge.
Digging of Pit size 0.6x1.5x2.1 Mtr & erection of gentry complete with mounting of accessories all including cost of Nuts & bolts. As per direction of Engineer-In-Charge.
Grouting and Muffing with CC 1:3:6 in 1.6x0.6x2x2=3.84 including cost of cement, sand and stone ballast complete work as per direction of Engineer-In-Charge.
Construction of Isolator Bus.Line Fabrication and Fixing of channell,125x65x8mm. & Fabrication and Fixing of M.S. Angle 50x50x6 mm , complete work , as per direction of Engineer - In- Charge.
Digging of Pit & erection ofIsolator Bus/Line complete work of alognment, fixing of accessories & mounting of Isolator and complete work all including cost of Nuts & bolts. As per direction of Engineer-In-Charge.
Grouting with CC 1:3:6 in 0.45x1.0x1.3x2 & Muffing of size 0.45x1.3x0.40x2 including cost of cement, sand and stone ballast complete work as per direction of Engineer-In-Charge.
Construction of Lightening Arrestor/Post Insulator /CT,PT structure Fabrication and Fixing of channell,125x65x8mm. & Fabrication and Fixing of M.S. Angle 50x50x6 mm , complete work , as per direction of Engineer - In- Charge.
Digging of Pit & erection of Lightening Arrestor/Post Insulator/ CT,PT structure complete work of alognment, fixing of accessories & mounting of Lightening Arrestor/Post Insulator/ CT,PTand complete work all including cost of Nuts & bolts. As per direction of Engineer-In-Charge.
Grouting with CC 1:3:6 in 0.45x0.8x1.3x2 & Muffing of size 0.45x0.80x0.40x2 including cost of cement, sand and stone ballast complete work as per direction of Engineer-In-Charge.
M.S. Plate size 200x200x8mm. With 6/8 holes (47Kg) for fing LA/PI. Complete work as per direction of Engineer- In- Charge.
Painting of of STP -55/ STP -72 with Channel and all steel part one coat of red oxide primer & two coats of aluminum paint Berger Luxol quality over one coat of red oxide primer & two strip of fluoresent alternate red & white paint 30cm wide upto 1.5 Mtr grom ground level and P.O. red and two strip of fluorescent altemate red and white paint 30CM wide upto 1.5 Meter from ground level. complete in all respect including cost of Paint.
Fixing of 33KV. VCB with complete work of commissioning & testing as per direction of Engineer- In - Charge.
Installation of Control pannel with complete wiring upto enerization complete work as per direction of Engineer- In - Charge.
Laying and fixing & Proper connection of control cable upto enerization complete work as per direction of Engineer- In - Charge.
Painting of all Sub Station equipment, structure, Fencing etc with two coat of red oxide and two coat of enemal paint as per requirement as per direction of Engineer-in-charge.
Fixing and commissioning of 33KV. LA as per direction of Engineer-in-charge.
Turfing of yard with 1:4:8 cc 10mm. Thick as per direction of Engineer-in-charge.
Stone bedding 7mm thick by 20mmdia round stone.
Proviing and fixing danger board under number plate completeby providing clamp of M.S. Flat 25x3mm. With Nut & bolts & barbed wire, danger board of M.S. Sheet 2mm. Thick.
Erection of Guarding complete job as per direction ofEngineer- In- Charge.
Route Clearance by cutting of tree branches/porning, lopping and chopping of trees for 33KV lines.
Earthing of Poles structure by earthing of support with M.S. Earth rod of 2.5 Mtr way of digging of M.S. Earth rod to proper depth and connection of G.I. wire 7/16 swg/earth wire both at electrode end. Complete work as per direction of Engineer Encharge.
Supply ( Annexure - II )
Supply of Holding Clamps M.S. Clamps for S.P.-55 made of M.S. flat of size 75x8 mm. with 65x16mm Bolt, Nut & washers duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample.
Supply of Holding clamps M.S. Clamps for S.P.-72 made of M.S. flat of size 75x8 mm. with 65x16mm Bolt, Nut & washers duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample .
Supply of Bracing clamp double ended Clamps M.S. Clamps for S.P.-55 made of M.S. flat of size 65x8 mm. with 65x16mm Bolt, Nut & washers duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample .
Supply of Bracing clamp single ended Clamps M.S. Clamps for S.P.-55 made of M.S. flat of size 65x8 mm. with 65x16mm Bolt, Nut & washers duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample .
Supply of F- clamps for S.P.-55 made of M.S. flat of size 75x8 mm. with 65x16mm Bolt, Nut & washers duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample
Supply of Earth Clamp M.S. Clamps for S.P.-55 made of M.S. flat of size 50x8 mm. with 65x16mm Bolt, Nut & washers duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample
Supply of Stay clamp single ended Clamps M.S. Clamps for S.P.-55 made of M.S. flat of size 75x8 mm. with 65x16mm Bolt, Nut & washers duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample .
Nut and Bolts off size.
Supply of E- Bracket Clamps M.S. Clamps for S.P.-55 made of M.S. flat of size 75x8 mm. with 65x16mm Bolt, Nut & washers duly painted by red oxide primer. The clamps should be free from any crack, welding & burrs, complete in all respect as per sample .
P.G. Clamps with Nuts & Bolts for ACSR Dod conductor.
24V. Battery set. (2Vx12No)100AH. Make Amoran/Exide
Eye Bolt 12x110mm.
Turn Buckle for Guarding
ASHOK KUMAR AND CO
PERFECT ELECTRICALS AND ENGINEERS
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .