SMART MAINTENANCE TO INCLUDE REPAIR TO LEEKAGE SEEPAGE TANKCLEANING SUNKON PORTION ROOF TREATMEN IN OFFRS MD ACCN ADM OFFICES MESSES VIP BLDGS UNDER THE AREA OF AGE BRI ARMY CENTRAL IN ARMY AREA JODHPUR (98946/E8)

Amount

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified and as directed.

40mm thick plain cement concrete (1:2:4) type B1, (using 20mm graded crushed stone aggregate) as in floor including finishing cement concrete surface even and smooth without using extra cement ,complete all as specified and as directed.

PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in flooring,path , foundation etc ,complete all as specified and directed.

50mm thick PCC 1:3:6 type C-1( using 20 mm graded crushed stone aggregate) as in plinth protection or similar places, without using extra cement complete all as specified and directed.

Chequred cement concrete tile (ist quality) 25 cm x 25 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 ,complete all as specified and as directed.

Coloured chequerred tile (ist quality)s 300x300 x 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Make Ultra

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade ,complete all as specified and as directed.

Supply only fine sand for interlocking paver blocks

Machine made precast cement concrete blocks (interlocking paves) of 60mm thick rubberised with 6mm top layers of ante abrasive material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2 complete all as specified and directed.

Machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C2 (20mm stone agg) ,complete all as specified and as directed.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & as directed.

PCC solid building blocks 10 Cm thick type B1 1:2:4 set in cement mortar (1:6) all as specified and directed.

Squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complate all as specified and directed.

All as per item No. 13 above but except stone complate all as specified and directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the out of MOD land complete all as specified and directed.

20mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) use as a levelling course complete all as specified and as directed.

15mm thick screed bed or bedding layer in CM 1:4 floor finished even & rough to recievr tiling/floor finish complete all as specified and directed.

Non skid ceramic colour joint free tiles (ist quality) 6 to 7 mm thick of size area exc 0.06Sqm but nexc 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed .

Non-skid coloured ceremic tiles (ist quality) joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Glazed ceramic tiles( ist quality) in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match colours tiles

Glazed colour ceramic tiles (ist quality) of size 300x200x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles complete all as specied and directed.

Vitrified Ceramic tiles any shade 10mm thick (Square / rectangular) polishbed , area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to match including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

All as per item No 23 above but vertical surfaces including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete all as specified & directed.

Wire netting galvanised steel wire cloth 0.9 mm nominal dia and 12 mm mesh lathing and fixed to ceiling including all laps, cutting and waste fixed with nails on ceiling complete all as specified and directed.

10mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc complete all as specified and directed.

15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface complete all as specified & directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

Two coat of oil bound distemper incl one coat of primer incl preparation of surface complete all as specified

Three coats of white wash on newly plastered surface of ceiling including preparation of serfaces complete all as specified and directed.

Two coat of colour wash on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation complete all as specified and directed.

One coats of white wash on old surface of wall complete all as specified and directed..

One coats of white wash on old surface of ceiling complete all as specified and directed.

One coat of colour wash on old surfaces including preparation complete all as specified & directed.

Complete removal existing preparing old decorated plastered or un-plastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and washing down with water including complete.

Two coat of cement base paint over a coat of white chalk on wall over a plaster/unplastered surfaces including preparation of surface complete.

Applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

Applying one coats of synthetic enamel paint on old painted serface wooden surfaces of any description over 10 cm width or girth including preparation of surfaces complete.

Applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces completeall as specified and directed.

Applying one coats of synthetic enamel paint on old steel serface of any description over 10 cm width or girth including preparation of surfaces complete.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

Mild steel work as in doors frames using MS angle iron complete all as directed.

Mild steel framed work as in brackets etc for coller stands , chajja etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc complete all as specified & directed .

Supply and fabrication of Mild steel guard bars and welded to window frames complete all as specified.

Fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all as per drg no CEBZ/TD/12/2008 sht 1/3 to 3/3

35mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed.

35mm thick 2nd class Hard wood paneled door shutter factory made (two panel) with lock rail andpanel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated.

35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, all as specified.

Solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube all as specified.

Taking down steel window/ventilator complete.

Steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, with cooler opening, dovetailed or welded all as specified.

Steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars, with cooler opening, dovetailed or welded all as specified.

Steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified.

Steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified.

Steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for glazing dovetailed or welded all as specified.

Steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for gauze dovetailed or welded all as specified.

Repair to steel window including taking down, replacement of unserviceable hinging device box type , handles, making them in serviceable condition and re-fixing in same opening including making soffits and jambs in CM 1:4 complete all as directed of Engr in charge satesfacation.

Aluminium anodized,tower bolt 200 mm long complete all as specified and directed.

Aluminum anodised handle extruded section of size 150mm long complete all as specified and directed.

Aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

Butt hinges 100 mm long,extruded aluminium alloy with mild steel hinge pin anodised type C- 21 for PVC door complete all as specified and directed.

Mild steel butt hinges 100 mm size complete all as specified and directed.

Mild steel butt hinges 100 mm size including welding fixed to frame complete all as specified and directed.

100mm size single action door spring hinge complete all as specified and directed.

100mm size single action door spring hinge including welding fixed to framecomplete all as specified and directed.

Floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 140mm long complete all as specified and directed.

Hackilng out old broken glass (any thikness, size quality or description) from metel frame including punching or drilling cut old glazing pins & providing fixing new ones.

4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed.

3 mm thick plain glass ordinary quality & glazing complete all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm as in necessary weilding complete all as specified and directed.

PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold fast iron fixing including necessary form work all as specified.

Flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item complete all as specified and directed.

Shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms)

MS with PVC coated decorative 25mm curtain rod with fixing brackets etc as in repairs complete all as specified and directed.

Soap dish of PTMT fixed with screws complete all as specified and directed.

PTMT towel rail 450 mm long fiexd to wall with chromium plated brass screws and woodn cleats Min weight 170gms approved make complete all as spcified and directed.

MS chromium plated peg set of five fixing with wall complete all as specified and directed.

Stainless steel sink ,1.00mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm complete all as specified & directed. Make: Bluestar/Jayana/Nirali

Vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc all as specified & directed. Make: Hindware/Cera

Vitreous china wash down water closet European Type pedestal pattern with seat cover and jet spray complete incl fixing of flush pipe etc complete all as specified and directed Make:- Hindware/cera

Vitrous china wash basin as in repairs, white flat back size 550x400 mm including , waste pipe, MS brackets complete all as specified and directed.Make:- Hindware/cera

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore as directed

100 mm dia Cast iron soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

75 mm dia Cast iron soil waste and vent sand cast pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

100 mm dia Cast iron soil waste and vent sand cast pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

75 mm dia Cast iron soil waste and vent sand cast pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

100 mm CI branch pieces single socketed Y equal or unequal complete all as specieied and directed.

75 mm CI branch pieces single socketed Y equal or unequal complete all as specieied and directed.

100mm CI bends any radius complete all as specified and directed

75 mm dia CI bend with oval acess door fixed to pipe complete all as specified and directed.

100mm dia CI vent cowl fixed to pipe complete all as specified and directed.

75 mm dia CI vent cowl fixed to pipe complete all as specified and directed.

75 mm dia CI floor trap plain grating including jointing with solvent cement 75mm dia

PVC SWR gully trap 125/110 mm size including setting and jointing with solvent all as specified and directed.

Chromium plated shower rose 75mm dia round shape complete all as specified and directed.

15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

20 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20mm dia all as specified specified.

25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia , complete all as specified and as directed.

15 mm dia angular stop cock with chromium plated long thread with flange , complete all as specified and as directed.

15 mm dia stop cock regular body with adujstable wall flange with chromium plated with (concealed type) , complete all as specified and as directed.

Bib, cock 15mm dia, cast copper alloy with crutch or butterfly handle, screwed for iron pipe all as spcified as fixed .

Low level flusing cistern PVC 9-10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection complete all as specified and directed.

PVC low level flusing cistern from the wall and fixed the same opening after replace the flush bend complete all as specified and directed.

Demolation of existing RCC tank on roof and removing from site of capacity exceeding 300 litrs and not exceeding 500 litres and making good the disturbed surface by providing 100 mm thick plateform required size for water storage tank with PCC (1:2:4) type B-2 using 20 mm graded stone aggregate over roof slab and finishing exposed cement concrete surface with 15 mm thick plastering in CM 1:4 Complete all as specified and directed.

Dismantling water tanks of capacity exc 250 ltrs but.nexc 500 ltrs and removing to store all as specified.

Rotational moulded polythene water storage tanks triple layer white, colour (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank 500 ltrs white coloured including tank led cover complete with fixing arrangement complete all as specified and directed. Make:- Sintex/Rotex/Polytuff

20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

50 mm thick PCC (1:2:4)Type B-1 using 20 mm graded stone aggregate for water tank plinth all as specified and directed.

Demiolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise

Providing precast RCC using 20mm graded aggregate as in cover slab for man hloes set in CM 1:6 complete all as specified and drected.

TMT bars 6 to 8mm dia and over, cut to length , bent to shape required including cranking, bending & binding with MS wire (annealed ) not less than 0.9mm dia or securing with clips, as in stirrups also & all as specified.

5 cm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, dry bedded complete all as specified and directed.

18 to 20 mm thick machine cut Kota stone slab flooring ,cooking plate from etc over screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing icluding 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

18 to 20 mm thick machine cut Kota stone in self and other places etc laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing complete all as specified and directed.

Fancy type vitreous WHB oval type fixed to granite of bracket or erecting stand with waste pipe complete all as specified and directed. Make: Jaquar/Cera

18 to 20 mm thick granite(approved quality by user ) in WHB counter top etc laid in dry bedded in pinning to wall including cutting rubbing grinding and polishing to edges and rounding off granite polish slab for smooth finish complete.Make: Jaquar/Cera

Continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised, 30 mm width of flaps (when open) complete.

18 / 19 mm thick pre-laminated particle board exterior grade, pre-laminated one side with decorative choice of lamination and other side balancing white lamination as in cup board shutter fixed with screw teak wood beading all round / exposed faces complete.

32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.

40 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.

35 mm thick pre-cast cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in louvers & jallies (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:4 complete all as specified and as directed.

Precast concrete 1:2 :4 type B-1 using 20 mm graded stone aggregate as in RCC jali post setting in mortar 1:6 complete

Rotational moulded polyethylene water storage tanks 1000 Ltrs capacity,triple layer (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991, complete.Make :- Sintex/Rotex/Polytuff

High quality looking mirror fancy type 5 mm thick with with round edge fixed to wall with chromium plated bolt area n exc 2.0 sqm complete all as specified and direction by Engr in charge nd as directed.

EWC complete dual flush with seat cover elegance etc complete Make Johnson Cat P6107PW or equivalent

White coloured WHB counter top ofsize 525x390mm including waste pipe all complete as directed of make Johnson Cat P5512PW or equivalent

Chromium plated 100mm dia shower with swivel joint of make Johnson Cat Part No S0005C or equivalent

15mm bore centre hole Basin mixture chromium plated all complete of make Johnson Cat Part No JAZZ-T3117C or equivalent

Wall mixture chromium plated with bend pipe all complete of make Johnson Cat Part No JAZZ-T3121C or equivalent

Long nose pillar cock long threaded all complete as directed of make Johnson Cat Part No JAZZ-T3103C or equivalent

Bib cock15mm bore chromium plated of make Johnson Cat Part No JAZZ-T-3105C or equivalent

Taking down bush/plant in roof side, wall and any position in the existing bldg portion removing the all root on wall complete with the satisfication of Engr in charge and after removing the root the whole area of spray the acid in the and making good distrubed area with PCC/Plastering etc complete all as specified and directed.

Jodhpur rubbed stone slabs self faced 7.5cm to 10cm thick , 25cm to 35cm wide ,hoisted and set jointed and grouted in cm 1:3 complete all as directed

S & F in repair Bidet spray (Health faucet) with 1 meter PVC tube and holder, completed.

15 mm dia two way bib cock with chromium plated long thread with flange complete all as specified and directed.

Stainless steel kitchen plate rack of size 1000 mm x 1200 mm x 300 mm made out of 1 mm thick stainless steel sheet complete all as specified and directed..

Stainless steel kitchen plate rack of size 900 mm x 600 mm x 300 mm made out of 1 mm thick stainless steel sheet complete all as specified and directed..

Plastic water closet seat white closed pattern with flat bottom and cover and aluminium hinging device completeall as specified and directed.

Bath cabinet of PTMT fixed with and including chromium plated brass screws and wooden cleats size 355mmx455 all as specified and directed of make Prayag/Polytuff.

Dismantling steel work including doors, gates , raling stair case ladder, cooler stand, guard bar etc in any position but excluding framed truss etc complete all as specified and directed.

Mild steel frame work as in stairs , hand rails half round or other stock section or section or core for wooden hand rail straidgt portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for foof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling boltinh or riveting etc snd similar work confirming to Fe 410-0 or fe 310-0

1mm thick mild steel , plain & corrugated sheet in wall cladding steel gates and similar work, cut of size holes punched including round headed screws, clout nail or rivets and fixed to wooden or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angle etc complete all as specifed and as directed

Framed work as in door or gates ornamental type of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to br prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering runing rails and guides) including forging item (tersule etc) and hanging also fastening and fixing complete all as specified and directed.Conforming to Fe 290.Gde E165.

M & L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces completeall as specified and directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering complete.Note:- Opening of existing wind tie where required for taking down of AC sheet is included in the rate quoted against this item.

2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with 'J' type bolts complete all as specified and directed.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

6 mm thick asbestos cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts complete.

Snap grid frame work of powder coated pre-fabricated GI channel for false ceiling of size 600x600mm with ceiling board PVC laminated Gypsum board 8mm thick and fixed as per maufacture instructions incl as per sample kept in GE office complete

Pre powder coated coloured aluminum anodized door frame and shutters for door/windows, etc or as approved by GE including jointing cleats for fixing etc as per manufacturers instructions complete all as directed. Note : (i) Weight of all aluminum members shall be measured(ii) Hinges, handles etc shall be measured and paid separately. (iii) Glass pan and rubber beading shall be measured and paid separately. (iv) Fixing of shutters with fittings shall be as per manufacturers instructions.

Standard powder coated coloured aluminum anodized Deco grill ‘U’ channel 25x12 mm with and including perforated aluminum wire mesh weight not less than 550gm/Sqm over grill complete all as specified and directed .

Solid PVC Wall Lining consisting of 5mm thick approved colour and shade PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and sample available

Towel ring square Make Jaquar Cat No ACN-1121N

Tumbular holder Make Jaquar Cat No ACN 1141N

Long nose pillar cock long threaded all complete as directed of make Johnson Cat Part No JAZZ-T3103C or equivalent

Soap dispenser push button capacity 0.8ltr ABS finish white/smoked Make Jaquar Cat NoSDR-WHT-DJ0010F

Concealed stop cock with wall flange 15mm bore of Make Jaquar ALIVE Cat No ALI-85083K

Over head shower 150x150mm square shape single flow (Body and face plate brass with chrome plated with arm complete all as directed Cat No OHS 1805 Make Jaquar

5 mm thick frosted glass fixed with alu channel/snap grid and rubber beading packing in door , windows and ventilator and securing complete all as directed

ALIVE Angular cock with wall flange Make Jaquar Cat No ALI-85053

Health faucet 1200mm long flexible tube and wall hook Make Jaquar Cat No ALD-573

Towel rack 600mm long with lower hangers Make Jaquar Cat No ACN-1181N

Soap dish holder Make Jaquar Cat No ACN 1131N

Glass corner self with brackets Make Jaquar Cat No ACN-1173

Bottle trap 32mm size 300x190mm long wall connection pipe and wall flange Make Jaquar Cat No ALD-769L

18/19 mm thick BWR block board of commercial type including laminated sheet on exposed side of approved colour and shade fixed with screws as in cup board shutters & shelves incl teak wood vaneer on exposed faces. Make : Duro/National.

Door closer aluminum extruded body hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed

Sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 5cm complete

Mild steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to relvent IS with applying one coat of zinc chromate primer complete all as specified and directed.

Hydraulic door closer designation No 3 universal type suitable for door shutter 851 mm to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (die cast) body complete.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete

Repair/maint of aluminum door of any size incl taking down and re-fixing of almn door incl providing of channel, beading and any reqd accessories reqd on ground and made serviceable up to the satisfaction of Engr-in-Charge complete all as specified

Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

75 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

PVC cupboard knob fixed with nut , screw and washer of mild steel bright finished size exc. 25 mm dia but n. exc. 50 mm dia (as per sample) complete all as specified and directed..

PVC Door frame of the size 18 x 50 mm with a wall thickness of 18 mm, made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesiveand screw.The sections are to be cut with a size 18mm x 50mm and the height according to the site. The door frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge. Make:- Rajshree/Sintex

18mm thick SOLID PVC DOOR SHUTTER made out of 18mm Celuka Printed and UVCoted sheet which is cut according to the size of the cabinet or for Kitchan Drawer provided and the groove to be made on the one edge so that the overlapping could be done for double leaf door shutter. The fixing is to be done by the 1.25” M.S. Screw to the frame with the channel hinge. Handles to be provided from outside of door. Complete the work according to the manufacturer’s specification & drawing and Directions of the Engineer-in-Charge.Make:- Rajshree/Sintex

Stainless steel powder coated tray of various sizes for drawer to keep the kitchen utensil as directed by Engineer-in-charge

Taking down AC/CI/PVC rain water pipes in any size fixed to wall complete with all fittings complete all as directed.

PVC (SWR) pipe 110 mm bore single socketed in any length with rubber ring, fixed on wall complete all as specified and directed.

PVC (SWR) bends, 110mm bore any radius with rubber ring joints complete all as specified and as directed.

Taking down or up steel tubing and connection including cleaning for refixing or removal to store for 25 mm dia

All as per Srl item No 194 above but 20 mm dia

All as per Srl item No 194 above but15 mm dia

Fixing only GI of water tubing, medium grade, galvanized, with all fittings fixed to wall all as specified for25 mm dia.

All as per Srl item No 197 above but 20 mm dia

ll as per Srl item No 197 above but 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

Steel water tubing, medium grade, galvanized, with all fittings fixed to wall all as specified for 25 mm dia.

All as per Srl item No 200 above 20 mm dia

All as per Srl item No 200 above15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

Taking down existing water proofing treatment from floor in any thickness upto to exixting RCC/ stone slab and cleaning the surfaces by wire brushes scrubing down with water and removing the dust and debries etc to a distance n exc 500 m from the site of work direction by Engineer in charge.

Rendering 15 mm thick on reinforced cement concrete surfaces in cement mortar (1:4) mixed with water proofing treatment compound at the rate of 3% by weight of cement complete all as directed.

75 mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate to use in sub base sub floors laid in slpoe 1:40 the surface of RCC slab shall be made even and smooth using extra cement when the concrete is still green complete all as directed by Engineer in charge

Applying one coat of cold applied bituminous primer @ 0.25 kg/Sqm shall be applied on plastered surfaces including side walls . Thereafter a layer of APP modified membrane 1.5 mm thick as specified above shall be laid by torch application method as per manufactures instructions including cushain layer of coarse sand thichness 25 mm shall be provided to protect membrane.

PCC (1:5:10) lean cement concrete type E2 using 40 mm graded stone aggregate in mass concrete after carrying out satisfactory testing of CI pipes/ PVC pipe joints and slab/walls by filling water for 72 hourse. sunken portion of nahani/ floor trap and pipe joints shall be embedded in PCC 1:3:6 type C1 complete.

32 mm bore light grade galvanised shal be provided 30 cm beyond wall surface between to drain out leakage in if any. The mouth of GI pipe shall have greval to avoide chocking. Top of sunken portion of RCC slab to be finished such that its slope towards spout.

Demolition of existing water proofing Treatment including PCC padding etc and cleaning roof surface etc preparing the surface to receive plaster /PCC by brushing with wire brush and fanning the surface to remove all loose dirt etc .

Plain cement concrete (1:2:4) type BO using 12.5mm graded crushed stone aggregate as over roof for making good depression/undulation to make the existing as filling in depression of roof slab for receiving treatment of roof complete all as specified and directed.

PCC 1 : 2 : 4 type B0 using 12.5 mm graded stone aggregate as in roof kerb including weathering, slightly rounded or chamfered angles and throating, as directed

M& L for roof treatment in the following stages :- (a) first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 3.00Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 1.40 Sqm and grooves shall be filled with bitumen

M&L for carrying out water proofing treatment for roofs in the following stages (a) Brushing neat cement slurry @ 3.00 kg/Sqm and 15mm thick plaster in cement motor 1:4 with water proofing compound complete. (b) Material and labour for water proofing treatment for roof slabs by applying bitumen primer @ 0.3 ltrs/sqm then the applying hot blown 85/25 @ 1.20 kg/sqm and laying 3mm thick APP water proofing memberane modified felt with polyster membrane Reinforcement having weight not less than 3.6 kg/sqm with overlap of 100 mm and end lap 150mm and finally applying bituminous aluminium based paint on top complete all as specified and as specified and directed. (Note: - WPC shall be measured and paid separately)

M&L for carrying out water proofing treatment for roofs vertical side of wall in the following stages (a) 15mm thick plaster in cement motor 1:4 with water proofing compound complete. (b) Material and labour for water proofing treatment for roof slabs by applying bitumen primer @ 0.3 ltrs/sqm then the applying hot blown 85/25 @ 1.20 kg/sqm and laying 3mm thick APP water proofing memberane modified felt with polister membrane Reinforcement having weight not less than 3 kg/sqm with overlap of 100 mm and end lap 150mm and finally applying aluminium based paint on top complete all as specified and as specified and directed. (Note WPC shall be measured and paid seperately)

Supply only Integral water proofing compund

Disconnecting of old serviceable PVC tank (upto 500 Ltr cap) setting aside (or lowering if required) including repair cleaning etc and hoisted in same location including reconnection and refixing for proper functioning of over head tank complete all as directed.

Disconnecting of old serviceable PVC tank (exceeding 500 ltr cap) setting aside (or lowering if required) including repair cleaning etc and hoisted in same location including reconnection and refixing for proper functioning of over head tank complete all as directed.

PVC water tank leid cover 500 ltrs/1000 ltrs fixed with screw ,G I wire with sutable arrangement as per direction of Engr in Charge .

Disconnecting existing (PVC /RCC) tanks exc 250 ltrs but not exceeding 500 ltrs setting aside or lowering if required for repairs, cleaning and hosting if required reconnecting and refixing in position cleaning with brush from inside of PVC/RCC tanks and connected pipes washing the tanks/ pipes with bleaching powder solution and finally 2% potassium permanganate solution for disinfection all as directed by Engr in charge including writing letter with synthetic enamel paint on tank "T C on DT - DD/MM/YY " all as directed and with entire satisfaction of Engr in Charge. (Note:-(i) In case of RCC tanks contractor will provided fresh lime coat after cleaning the tanks (ii) The rate quotaded shall deemed to includes letter writing as specified with writingactual date of cleaning of the tanks.

All as per item no 219 above but exc 500 ltrs but n exc 1000 ltrs.

Material and labour for providing cement concrete (1:2:4) type BO using 12.5mm graded crushed stone aggregate as over roof as in padding complete

Material and labour for rendering 10mm thick cement mortar 1:3 on concrete surfaces on roof finished the surface even and smooth without using extra cement complete all as directed using WPC @ 3% by wt (WPC should be measured seperately)

Note for all above items:All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old material" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

M/s Chawariya Enterprises

M/s Vishnu Infrastructures

BEYLIM INFRA