Supply and Laying of under ground Electric Power Cable at ICP Jogbani

Amount

Supplying of PVC insulated, PVC Sheathed/XLPE, flat steel strip armoured aluminium conductor power cable of 1.1 KV grade conforming to IS:7098(Part-1)1988 or latest amended following sizes etc. complete all as specified and directed by Engr-in-charge.

3.5 x 240 sq.mm

3.5 x 150 sq.mm

3.5 x 120 sq.mm

3.5 x 25 sq.mm

Demolishing cement concrete manually or by mechanical means including disposal of materials within 50 mtrs lead as per direction of Engineer-in- charge.

1:3:6 of richer mix

Providing, laying and fixing following dia G.I pipes medium class in ground complete with GI fittings including trenching (75 cm deep) and refilling etc all as specified and directed by Engr-in-charge.

100 mm dia

80 mm dia

Providing and laying in position cement concrete in specified grade excluding the cost of centering shuttering - all work upto plinth level complete all as specified and directed by Engr-in-charge.

a) 1:1.5:3(1 cement: 1.5 Coarse sand : 3 graded stone aggregate 20mm nominal size

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. complete all as specified and directed by Engr-in-charge.

Up to 35 sqmm

Above 95 sq.mm and up to 185 sq mm

Above 185 sq. mm and up to 400 sq. mm

Laying of one number additional PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required

Up to 35 sq mm

Above 95 sq.mm and up to 185 sq mm

Above 185 sq. mm and up to 400 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required all as specified and directed by Engr-in-charge.

3.5 x 240 sq.mm

3.5 x 150 sq.mm

3.5 x 120 sq.mm

3.5 x 25 sq.mm

Supply, installation, testing & comissioning of LED street light 135 watt, 240 V, 14800 lumen, colour temperature-5700k, system luminous efficacy lm/W- greater than equal to 110 with pressre die cast aluminium alloy for housing (Heat sink) for effective thermal management, corrison resistant, cable gland is used for maintaining ingress protection, polyster powder coated grey colour, tampered protective toughened glass thermal shock, high efficiency LED module with LED SMD package, powered by inbuilt, isolated electronic LED driver (SMPS based constant current supply) with lower THD. Output open/short circuit protection, over voltage protection,surge voltage protection suitable for pole mounting with bracket arm OD 63 mm max complete all as specified and directed by Engr-in-charge. Make - Havells, Model No-ENDURA PULSE, Philips, Crompton, or equivalent.

RB MULTITECH