CA NO. GE/PGH/53 OF 2025-2026

Amount

DESCRIPTION OF ITEMS

M & L in repair to sunken floor by providing water proofing treatment to sunken floor surfaces of RCC slab including demolition of old sunken by the following specifications as specified and directed :- (a) Provide PCC 1 : 1.5 : 3 type A with using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or equivalent as approved, finish the surface even & smooth without using extra cement. (b) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion. (c) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete. on complete sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc (d) Applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat would be paid seperately.) (e) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. Note : Floor Area shall be measured for payment.

M & L for PCC (1:5:10) Type E2 (40 mm graded Aggregate) in sunken floor slab and mass concrete complete all as specified and directed.

Dismanling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.18 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in CM 1:6, icomplete all as specified and directed.

M&L glazed ceramic coloured tiles size 300mm x 450 mm 6-7 mm thick (Colour and design of tiles as approved) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M & L for vitrified ceramic tiles 9 to10mm(nano polished) thick light shade (square/rectangular ), area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed in cement mortar 1:6, complete all as specified and directed.

All as per item No 06 above but in skirting over & including 10mm thick screed in CM 1:4 complete all as specified and directed.

S & F in repair of vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed.

S & F in repairs vitreous china wash hand basin with padestal white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.

S&F in repair Table/counter top wash hand basins, vitreous china,of standerd size (480mm x 550mm) having any shape (ractangular, oval, square, circular etc) including 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.

S & F in repairs of padestal pattern Vitreous china wash down water closet pan white including trap,PVC seat cover white, connection to drain (or out going pipe ) and to flushing pipe antisyphone pipe etc complete all as specified and directed.

S & F in repair of vitreous china single Piece EWC of size 67.5 × 35.5 × 72 cm,With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S & F in repair of Vitreous China Urinal, Half stall type,\ white (excluding flushing cistern, flush pipe and waste pipe)Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S & F in repair of CP brass fancy type 15mm bore bib tap, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair of 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified and directed

S&F in repair of 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S & F in repair of 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repair of CP fancy type angle valves,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S & F in repairs of CP Brass Fancy type shower rose 75 mm dia with shower arm 150 to 200mm long CP Nipple of approved quality complete all as specified and directed.

S & F in repairs of CP Brass Fancy type shower rose 125 mm dia with shower arm 150 to 200mm long CP Nipple of approved quality complete all as specified and directed.

S & F in repairs of CP Brass Fancy type hand shower 125 mm dia with 1.00 to 1.50 mtr long flexible tube and wall hook of approved quality complete all as specified and directed.

S&F in repair 15 mm bore basin mixer (swan neck) Fancy Type brass chromium plated with capstan heads screwed down high pressure with or without letter ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repair chromium plated brass wall mixer 15mm, 3-in-1 fancy type with provision for both hand shower and overhead shower complete with wall flange (excluding hand & over head Shower) screwed down for 15 mm GI bore pipe, complete all as specified and directed.

S & F in repair Sink Mixer (swan neck) 15 mm CP Fancy exclusive type as per direction by Engg-in-charge, complete all as specified and directed.

S & F in repairs of Wall mixer CP hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

S&F in repairs of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. complete all as specified and as directed.

S&F in repairs of fancy type chromium plated two way bib cock of 15mm bore ,screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

S& F in repairs of sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 60mm wide with chromium plated bracket guard and railing 500mm long fixed with and including bracket and screws on wall surface all as specified & directed.

S&F in repairs corner glass shelf 5.5mm thick with aluminium bracket and railing as per sample, fixed with and including bracket and screws on wall surface all as specified & directed.

S & F in repair of PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 550 x 450mm complete all as specified and directed.

S & F in repair of plastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair of PVC tank Cover for OHT of 500 Ltr Tank capacity fixed with four screws complete all as specified and directed.

S&F in repair of Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair of waste/flush pipe of polyethylene of low or high density or PVC, 32mm dia for low level flushing cistern/basins complete as complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack made out of 1mm thick stainless steel of size 900 x 600 mm of best quality of approved make, complete all as specified and as directed.

S & F in repair of LDPE pipe 32mm bore fixed to wall/ceiling with bends/elbow complete all as specified.

Supplying and laying of CPVC pipes 15mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including necessary fittings and Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified.

S&F in repair of stainles steel gratings round type 100mm size of (Min Weight 100 gms) complete all as specified and directed.

S&Fin repair of PVC valveless, syphonic action type flushing cistern,low/high level white with inlet ball valve float and handle including brackets complete fixrd in repair capacity of flush 10 ltrs complete all as specified and directed.

S & F in repair of 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

Supplying & Fixing in repair of rotational moulded polythylene 500 Ltr capacity water storage tank (double layer)(cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed.

S & F in repair of rotational moulded polythylene water storage tanks(double layer), 1000 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed.

Taking up or down steel tubing 15mm bore & connections and S & F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed.

Taking up or down steel tubing 20mm bore & connections and S & F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed.

S&F in repair of gun metal gate valves 15/20 mm with lever arm screwd both ends for iron pipes complete all as specified and directed.

S&F in repairs brass CP toilet paper holder fancy type, complete all as specified and directed.

S & F in repairs stainless steel wall mount case with soap holder with brush holder fixed to wall, complete all as specified and as directed.

S & F in repair of urinal/wash hand basin waste coupling (Brass) 32mm complete all as specified and directed.

S & F in repair of Sink coupling coupling (Half/Full thread) 32mm complete all as specified and directed.

S & F in repairs of internal fitting(including syphon, ball valve, lever, rubber cone etc) for single flush cistern complete all as specified and directed.

S & F in repairs for premium body 15 mm dia spindle for bib tap, angle valve, pillar tap etc complete all as specified and directed.

S&F in repair of 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed.

S&F in repair of 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed.

S&F in repair of PVC ( SWR) bends any radius bore of 110 mm all as specified and directed.

S&F in repair of PVC ( SWR) bends any radius bore of 75 mm all as specified and directed.

S&F in repair of PVC (SWR) junction single, (Single T) equal or unequal of bore 75mm all as specified and directed.

S&F in repair of PVC (SWR) junction single, (Single T) equal or unequal of bore 110 mm all as specified and directed.

S&F in repair of PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete all as specified and directed.

S & F for Anodised aluminium snap grid size (605mmx605mm) frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M & L for Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description as provided for Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, confirming to Fe-410 Gde E-250 Quality A complete all as specified and directed.

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm width or girth on untreated steel surfaces over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc complete all as specified and directed.

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plateforms and like including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite over & incl 20 mm thick screed bed built in CM 1:4, complete all as specified and directed.

M&L for Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete complete all as specified & directed.

M&L Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types complete all as specified and directed. Note : Cutting of marble are included in this rate.

M & L 20 - 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 15 mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab/rubbing, polishing etc complete all as specified and directed.

All as per item no - 73 but as in skirting over 10mm thick rendering in CM (1:4 ) complete all as specified and directed.

M & L for chequered cement concrete tiles 30cm x 30cm x 25 to 30mm thick (Glossy finished) with grey cement and pigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour ( Glossy finish), design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M & L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base for pavement , path, floor etc, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection Finishing surfaces of concrete topping even and fair (without using extra cement) including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

M&L brick work with Sub Class 'B' bricks straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

M & L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete, etc. all as specified and as directed.

M & L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceiling surface finish even and smooth without using extra cement including taking down cement plaster on brick or stone walls/ concrete surface, etc. complete all as specified and directed.

M & L rendering 15 mm thick in cement mortar 1:4 in two layers, 10 mm thick plaster in first coat and second coat of 5 mm thick with WPC as per manufactures instruction, surfaces, surfaces finished even and smooth without using extra cement including taking down cement plaster on brick or stone walls / concrete surface etc, complete all as sp & dir. Note:- WPC will be measured and paid separately.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer over a coat of putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for provide PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete as directed and specified.

M & L for cutting holes in brick walls built in cement mortor at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM 1:3 and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete as directed and specified.

Taking down shutters of any description area exceeding 1.00 Sqm and not exceeding 2.0 Sqm all as specified and directed.

S&F for PVC door frames of sizes 50 x 47 mm made out of 5 mm plain PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded plain PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of plain PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified and directed.

S & F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkhats all as specified and directed.

S & F in repairs Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M & L for Pressed steel frames for doors of size 125mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregate) as in filling of pressed steel frame complete all as specified and directed.

S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

S & F for 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F for 125 mm long Aluminium handles, cast type, anodised complete all as specified and directed.

S & F for 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed.

S & F in repair brass Mortice lock vertical type of size 100mm with 2 levers including escutcheon plate and two keys complete all as specified and directed.

S & F in repair of Galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mmin Aluminium/wooden/steel windows, doors, ventilators and fixed with and including necessary fixing arrangement including takingout old wire mesh from steel window and fixing old steel flats and nut complete all as specified and directed.

S & F in repair of figured glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pan incl hacking out complete all as specified and directed.

M & L for sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sq.M in each pan incl hacking out complete all as specified and directed.

S&F in repair of Drapory/curtain rod 20-25mm dia of stainless steel fixed with fancy type matching pair of bracket not less than 75 grams each fixed with screw complete all as specified and directed.

M & L for preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F in repairs 18 mm thick factory made PVC sheet one side pre-laminated sheet kitchen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lapping bending for 0.5 mm thick PVC sheet lapping at all four edges using bonding tape etc complete including taking down all as per specified and directed by Engr-in-Charge manufacturers specification, complete all as specified and directed.

S & F in repair 30 mm width of flaps (when open) Continous (piano) hinges , mild steel, bright finish or electrogalvanised , complete all as specified and directed.

S & F in repair Mild steel barrel tower bolts 100mm , stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F in repairs of Mild steel pressed handles 150 mm, oval type, stove enamelled black complete all as specified and directed.

S & F in repair of mild steel door closer 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed.

S & F in repairs of aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed.

S & F in repair of Mild steel sliding door bolts of length 300mm , plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F in repair for shower arm of size 6" to 12" fixed in GI pipe with necessary GI fittings complete all as specified and directed.

Cleaning and removing all scale and dirt and elgy using wire/jute from inside of RCC /PVC tanks and connected pipe removing to a distance of not less than 250 mtrs,washing the tank/ipe with bleaching powder solution and finally applying 2% potassium permangnate solution for disinfection,including marking with black/white paint on white/black base on tank "Tank cleaned on________Dt________" exc 250 litre & n.exc 500 litre complete all as specified and directed.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credits and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One light point controlled by one, two way switch 5 Amps

(c) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(f) One bell point controlled by one, bell switch 5 Amps

Description all as per item No 120 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed.

S & F for Switch Piano type 2 way switch 5 amp, 230 Volts complete all as specified and directed.

S & F for Switch Piano type single pole 15 amp, 230 Volts complete all as specified and directed.

S & F for switch bell push piano type 5 amp, 230 Volts complete all as specified and directed.

S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed.

S & F for socket outlet 2 in 1 , 5 pin, 15 amp, 230 Volts complete all as specified and directed.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed.

S & F for stepped type electronic fan regulator flushType complete all as specified and directed.

S & F for lamp holder , PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.

S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit

S&F MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators, concealed in wall, complete all as specified and directed.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S&F isolator TPN, 433 volts, B Curve, 100 Amps of 10 KA, complete all as specified and directed.

S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S&F D Box with MCB protected Socket with plug 20 A with sheet steel Enclosure suitable for AC/Geyser & industrial use (without wire) as specification IS 13032 & IS 8623 complete all as specified and directed.

S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED Bldg sec light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x6.0 mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0mm dia Protedcted by light GI Pipe 20 mm dia and 15 dia med grade for watering pipe and connected by means of bolts, nuts, check nuts and washers of galvanized iron or steel, iron funnel,Iron pit cover and chamber all as shown in electrical plate No. 3 connected to earthing test point including testing on completion complete all as specified and directed.

Note:- 1. Nature of contract is of Day to day maintenance, therefore contractor will be required to deploy sufficient skilled manpower i.e. Plumber, Carpenter, Mason and other similar trade to attend day to day complaints lodged by the user on daily basis. 2. Contractor will assign a supervisor who will collect complaint slip, will assign trademen to complaints and will submit the completed slip to the office on daily basis.Timely completion of complaints leads to higher user satisfaction, hence to avoid delay, complaints related to minor repair(wiremesh, door, window joinery repair), fixing of fittings(plumbing,sanitary(PVC pipes and fittings)),should be completed within 24 hours, Else contractor will be penalised with flat rate @ 50 rupees for every complaint not completed within stipulated timeline and amount will be recovered from RARs. 3. Delay due to non availability of materials which is incorporated in the BOQ will not be entertained, materials should be available at any time. 4. All expenses to maintain above complaints addressal system will be included in the quoted rates by the contractor.

Note : Tenderers may note that amount of credit Rs 1,01,486.50 will be deducted from the total amount arrived, at the time of Acceptance of contract.

R K CONSTRUCTION (BID ID -3361026)

Builders Harpal (BID ID -3376399)