Providing High Mast Lighting to Truck Terminal area near Custom House at NMPA

Supply of 20M high mast shaft in two sections suitable for 39 m/sec wind speed, with head frame, winch mounting bracket, luminaries carriage suitable to install 8 nos luminaries in Asymmetrical arrangement. As per Technical Specifications.

Supply of raising, lowering system comprising double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial. As per Technical Specifications.

Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. As per Technical Specifications.

Supply of 400W LED flood light luminaries. As per Technical Specifications.

Supply of low intensity LED type single dome aviation obstruction light. As per Technical Specifications.

Construction of shallow foundation with M25 grade concrete for the high mast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour. As per Technical Specifications.

Erection of the high mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sq. mm, lugs, MCB and all labour as a complete.

Design & construction of RCC barricade wall around the high mast by using M 20 concrete with 10 mm vertical rod at a gap of 200 mm double layer and 3 rows of 8 mm horizontal rod by keeping 2000 mm inner radius from centre of high mast foundation as per the specifications. (As per Technical Specifications)

Providing RCC/Stone masonry foundation for the High Mast control Panel and the dimension of the foundation is 800(W) x 1000(H) x 400(D) mm and gap between the pillars is 350 mm for cable connection to the control panel. The foundation starts 300mm below the ground after making 100mm stone soling and height of the foundation 500mm above the high Mast foundation level and curing etc. and the panel should be stand on the four Stainless steel bolts (12mm x 6”)and each bolt with four nuts & washers at 50mm height from the foundation and complete. (As per Technical Specifications)

Design, fabrication, Supplying of Stainless steel (SS304 grade) outdoor type Feeder pillar suitable for 400 amps, 3 ph & N, 440 volts, 50 Hz Capacity, IP: 54. Bus bars: copper with 1 No’s 400 Amps, 4P, Change Over Switch, 1 No. 400A, 4P MCCB - I/C & 4 Nos. 100A, 4P, MCCB - O/G and 01 No. 250A, 4P, MCCB - O/G. ((As per Technical Specifications)

Design, fabrication, supplying of stainless steel (SS304 grade) outdoor type feeder pillar suitable for 800 amps, 3ph & N, 440volts, 50Hz capacity IP 54, Bus bars: copper with 1 No., 630A, 4P, MCCB -I/C and 1 Nos. 400A, 4P, MCCB - O/G, 3 Nos. 250A, 4P, MCCB - O/G, 2 Nos., 100A, 4P, MCCB - O/G. (As per Technical Specifications)

Installation and commissioning of feeder pillars. work includes supply and fixing wiring of required SS/GI hardware’s, earthing, etc complete. Work also includes necessary earth work, excavation, construction of late rite stone foundation, plastering etc complete.

Providing GI pipe earthing for High Mast & feeder pillars using 40 mm dia 2.9 mm thick, 2.5 meter long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400 x 400 x 400 mm with a cast iron cover. The electrode shall have staggered holes of 12-mm dia and the electrode should be covered 150 mm around with alternate layers of salt and charcoal from the bottom of the pipe to the bottom of the CC chamber the connection from the electrode is to be established through GI Flats. (25x3mm for lighting and panel & 50 x 6mm for lightning arrestor) using GI bolts and nuts. work includes supply & fixing of required GI flats for each earthing connection.

Installation and commissioning of the stainless steel high mast control panel by terminating the required cables such as Incomer, lighting and motor. Work also including supply and fixing of required materials such as glands lugs etc complete.

Supplying of 1.1KV XLPE insulated, PVC extruded inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS -7098 Part-1. a) 3.5c x 50 sq.mm

Supplying of 1.1KV XLPE insulated, PVC extruded inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS -7098 Part-1. a) 3.5c x120 sq.mm

Labour charges for laying of following size 1.1KV class LT UG cable on trench as required etc., complete, a) 3.5c x 50 sq.mm

Labour charges for laying of following size 1.1KV class LT UG cable on trench as required etc., complete, a) 3.5c x 120 sq.mm

Digging of trench of 0.6 Meter deep x 0.5 Meter wide in Hard Soil, refilling the trench to the required ground level and consolidating etc., complete. Upto lead of 50 mtrs. Supplying and displaying necessarty Dnager Board and Lighting, using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed.

Supplying and installing cable route marker made up of RCC Block of size 100cm (H) x 50 cm (W) x 6 cm (D) indicating Embossed text as “NMP LT Cable↑” with yellow paint an red colour letters and fixing with cement concrete.

Supplying and making end terminations of cable of size 3.5C x 50 sq.mm with suitable glands , crimping the lugs in the Feeder pillars with supply, fixing of all required hard wares complete.

Supplying and making end terminations of cable of size 3.5C x 120 sq.mm with suitable glands, crimping the lugs in the Feeder pillars with supply, fixing of all required hard wires complete.

Supplying and laying of RCC semicircular C-cut pipe of 25mm thickness and 1 mtr length for covering the cable

Supplying and filling sand in excavated trench to cover already laid Ug cable to a depth of 150mm all round the cable.

Supplying and fixing of 100 mm dia class C GI pipe for drain and railway crossing.

KRIPA ELECTRONICS INDIA PVT LTD

M/s Anugraha power services

M/S GYAN ENTERPRISES

Jaydeep Agency Corporation

M/s. Precision Electrical Works

OLIVE EXPORTS PVT.LTD.