Loading…
Loading…
Tender Value
₹64.0 L
EMD Value
₹1.3 L
Closing Date
6 Aug 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (M & P)
Above/Below/Par
ELECT POW.
14 conditions · 3 needing a document upload
As per Rly Board's L. No. 2022ICE-I/CT/GCC-2022/Policy, Dated: 14.07.2022, the tenderer must have minimum average annual contractual turnover of V/N or V whichever is less,where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. ( Click here to download Format)
Tenderers have to submit the valid Electrical contractor license with supervisor competency certificate.Non submission of document, offer of bidder shall be summarily rejected.
(a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Definition of similar nature of work: Any electrical work related to HT/LT installation. ( Click here to download Format)
30 conditions · 12 needing a document upload
Submission of,Annexure-V(A) of ACS No2 dated:13.12.2022) shall also be submitted by the each member of a Partnership Firm/ Joint Venture(JV)/ Hindu Undivided Family (HUFF)/L mited Liability Partnership (LLP) etc. as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. ( Click here to download Format)
Declaration regarding association of Rly Officer(S) or retired Rly. Officers with bidder/tenderer as per annexure-B of tender document. ( Click here to download Format)
Declaration of no relative being an employee of railway as per annexure -E of tender document. ( Click here to download Format)
Bank mandate form as per Annexure -D of tender document. ( Click here to download Format)
Relevant Work completion Certificate of similar nature work issued by client indicating LOA/Work order no., Agreement no., currency of contract, Commencement of work and completion date, Contractual amount, total payment received.
Copy of LOA/Work order/Agreement which includes the detailed Scope of work with contractual amount.
Power of attorney ( notarized affidavit on Stamp Paper) to authorize a person to submit the offer if Firm is a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF etc. For proprietorship firm, it is not required, if offer is submitted by proprietor himself.
Active mobile contact No. & E-Mail ID for future communication.
Any other document as per requirement of tender clause.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Submission of option for "Implementation of payment through letter of credit(LC) As option in Domestic supply/works( including all services and maintenance contract), having estimated value of Rs. 10 Lakhs and above".
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
Submission of GSTN & PAN card.
Any other document as per requirement of tender clause.
The tenderers whether sole proprietor , a limited company or a partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship documents etc. along with the tender. If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by Notary Public or by Magistrate in favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement , receive money, witness measurements, sign measurement books , compromise, settie, relinquish any claims, preferred by firm and also sign No Claim Certificate and refer all or any disputes arbitration.
Right of Railway to Deal with Tenders: The Railway reserves the right of not to invite tenders for any of Railway work or works or to invite open or limited tenders and when tenders are called to accept a tender in whole or in part or reject any tender or all tenders without assigning reasons for any such action.
Certificates from private individuals for whom such works are executed being executed is not acceptable.
Any Conditional offer will be summarily rejected.
In case of any wrong information submitted by tenderer, the contract shall be terminate, Earnest Money Deposit (EMD), Performance Guarantee (PG) and Security Deposit *(SD) of contract forfeited and agency barred for doing business on entire Indian Railways for 2 years.
2 % IT shall be deducted from bill.
As per section 51(1) Railway shall be required to deduct Tax at source (TDS) @ 2% On the Payment made to supplier where the total value of supply under contract exceeds Rupees 2,50,000/- Excluding GST.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
Earnest Money: -All the tenderers / Contractors have to deposit full earnest money as stipulated in the tender document through online modes as permitted in IREPS application
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
JOINT VENTURE will not be permitted for the tenders
For Standard Financial criteria and Standard Technical criteria - Tenderers are required to submitted authenticated certificate along with the tenders from officers of government or semi- government/public sector undertakings under whom the work has been executed indicating there in the name of work executed, value of works/payment details and period during which completed. Such certificates should have signature and seal of the concerned officer. In the absence of such certificate the tender may not be considered.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
Electrical work for the work of manufacture, supply, installation and commissioning of OFF LINE reheating furnace and sprue wash station for rework of railway wheels in mould room at RWP, Bela.
EL-Spruewash-OT-2026
EL-Spruewash-OT-2026
Open
Works - General
4 Months
Saran, Bihar
₹0
₹1.3 L
6 Aug 2026
15 Jul 2026
23 Jul 2026
19 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 64,00,932.85 | ||
| — | 2.00 | — | — | ||
| Supply, fabrication, installation, testing and commissioning of electrical outdoor electrical panel (LVDB) With 4 Leg, canopy type made of 1.6 mm thick IP 42 sheet steel enclosure duly painted with powder coating. Copper bus bars having current carrying capacity as required, suitable for 415 V, 3 phases, 4 wires, 50Hz, A.C. supply with fixing of Incomer MCCB TPN 630A, 50KA-1 No., out going MCCB TPN 400 A, 50 KA-02 Nos. MCCB TPN 250 A,50 KA-02 Nos. & 100A,30KA MCCB TPN -02Nos, Digital Ampere meter 0-630Amp, Digital Volt Meter-500 volt, Phase indicator including all connection as required. All the above material shall be provided by contractor. MCCB/MCB, Make: L&T, ABB, Schneider, Siemens, C&S, Legrand. | — | — | — | 4,10,000 | |
| — | 2.00 | — | — | ||
| Supply installation, testing and commissioning of capacitor bank of capacity:175 KVAR, (25KVAR X 7Nos.) ratiing with supply and fixing of all related spares, components, switch gear, meters, Wiring harness etc. as required including MCCB Three Pole 400A, 50 KA-01No., MCB 63 A, 3P-06 Nos. Contactor 3P, 2NO, 2NC 63 A 6Nos., copper Bus bar (R-Y-B)- 3No. having current carrying capacity as required, suitable for 415 V, 3 phases, 4 wires, 50Hz, A.C. supply, APFC digital controller-1 No. Digital Ameter ,Voltmeter, Selector Switch for auto manual Mode of controller. Make of Capacitor bank: L& K, EPCOS, Unistar . | — | — | — | 6,67,290 | |
| — | 2500.00 | — | — | ||
| Supply of 4C X 240sqmm PVC insulated and PVC sheathed XLPE Armored Aluminum Power Cable of 1.1 KV. Make : Havells, Polycab, KEI, RR Cables, Filonex, Universal | — | — | — | 50,60,000 | |
| — | 2000.00 | — | — | ||
| Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct/Tunnel as required.(i)Above 185 sq. mm and upto 400 sq. mm. | — | — | — | 1,56,000 | |
| — | 20.00 | — | — | ||
| Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(i)4C X 240sqmm Make:Havells, JBL, Reychem, 3M. | — | — | — | 13,860 | |
| — | 60.00 | — | — | ||
| Supply & laying of 150 mm Dia GI Pipe, medium gauge "B" class for XLPE/LT cables protections.Pipe Make: Tata/Jindal/Bansal. | — | — | — | 79,620 | |
| — | 60.00 | — | — | ||
| Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.(i)Above 185 sq. mm and upto 400 sq. mm | — | — | — | 5,400 | |
| — | 1.35 | — | — | ||
| Demolishing cement concrete manually/ by Mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | — | — | — | 2,520.45 | |
| — | 1.35 | — | — | ||
| Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone- III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | — | — | — | 6,242.4 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Implementationofpayment.pdf Impementation of payment through LC as option
ATTACHMENT
FinalcolouredGCC-2020.pdf
ATTACHMENT
GCC-Apr2022.pdf
ATTACHMENT
TDSpruewashireps.pdf
ATTACHMENT
Implementationofpayment.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .