SR to staff Quarter in at Court Campas Umargam Ta. Umargam Dist. Valsad (Repairs to Door - Window, flooring work Paver Block Sanitary work & misc. Work Etc.)

No figures

1 Dismentaling tiled of stone floors laid in mortar 462.00 Sqm 48.21

including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift.

2 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 282.00 Sqm 1397.83

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for DARK shade

3 Providing and laying Anti skid Ceramic tiles 6mm thick 83.00 Sqm 970.07

in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.

4 Providing and laying white glazed tiles 6mm thick in 154.00 Sqm 1073.90

skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement slurry

5 Dismentling doors, windows, ventilators etc. (wood or 24.00 No 187.71

steel) shutters including chowkhats architraves,

holdfasts and other attachment etc. complete and

stacking them within all lead and lift.(i) Not exceeding

Sq.M. in area.

6 Providing and fixing window having extruded aluminum 11.00 Sqm 1583.95

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@

Wt.1.07 Kg/mt , vertical member of size 92mm x

31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding

shutters of horizontal member size

mmx18mmx1.29mm @ wt.of 0.456 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing

to frame as per details etc

Item Rate In

Description of Item Quantity Unit Amount

No figures

7 Providing and fixing standared extruded of alluminium 2.00 Sqm 1175.56

section of size 63mm x 38.10mm x 1.2mm , @ Wt.

Kg/mt with colour Powder Coated alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

8 Demolition of terrace including stacking of serviceable 238.00 Sqm 63.80

materilas and disposal of unserviceable materials with

all lead and lift.(i) Brick tile covering..

9 Provoding and fixing flush door shutters, solid core 4.00 Sqm 1797.77

construction with frame of first class hardwood with

cross board and face veneer or plywood face panels,

including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block

board core anodised alluminium butt hinges in flush

door shutters (2) 35 mm thick.

10 Dismantling santtary fittings like wash basin . W.C. pan 10.00 No 405.65

Indian and European type, flushing tank etc. including

stacking the materials with all lead and lift

11 Providing and fixing concealed center point to wall 10.00 Rmt 442.03

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [E] 40mm.

12 Providing and fixing concealed center point to wall 60.00 Rmt 249.72

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [C] 25 mm.

13 Providing and fixing concealed center point to wall 84.00 Rmt 166.86

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete.[A] 15 mm.

14 Providing and fixing wsh down water closet (European 4.00 No 2214.36

type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-

Cement : 1-fine sand) (Seal and cover to be measured

and paid for separately)(A) vitreous China Pattern :(i) in

white colour with Plastic seat and cover { Hindustan,

Cera, Parryware or equivalent } Including & fixing 'P' or

'S' trap,Flush Cock 25 mm Dia G.I Inlet Connection.

Item Rate In

Description of Item Quantity Unit Amount

No figures

15 Providing and fixing water closet squatting Pan (Indian 3.00 No 1534.23

type W.C. Pan) size 580mm (Earthwork, bed concrete,

foot reste and trap to be measured and paid for

separately) (A) Vitreous China.(I) Long pattern = White

colour and Flush Cock 25 mm Dia G.I Inlet Connection.

16 Providing and fixing screw down bib taps of following 15.00 No 186.82

size.(B) Brass chromium plated screws down Bib Tap. (i)

17 Providing and fixing Gun metal check or non-return 12.00 No 420.63

fullway wheel valve.(C) 25mm dia.

18 Providing and fixing Gun metal check or non-return 5.00 No 663.42

fullway wheel valve.(E) 40mm dia.

19 Providing and fixing cast iron (Spun) Nahni trap of the 6.00 No 606.08

following nominal diameter of self cleaning design with

C.I. screaed down or higned grating including cost of

cutting and making good the walls and floor 100mm inlet

and 50mm outlet.(C) 100mm dia.

20 Providing and fixing S.W. gully trap with C.I. grating brick 4.00 No 1246.91

masonry chamber and water tight C.I. cover with frame

of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps.(B) 150mm x 100mm size

P or R type

21 Providing and fixing C.P. brass towel rail comlete with 2.00 No 603.19

C.P. brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

22 Providing and fixing to wall ceiling and floor 10.0 Kg. 54.00 Rmt. 336.23

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)110 mm

23 Providing and fixing washbasin with single hole for pillar 3.00 No 1978.98

tap with C.I. or M.S. brackets painted white including

Rubber plug, sutting holes and making good the same

but excluding fittings and also including rate of C.P.

brass waste for washbasin or sink (A) 32mm dia. , M.I.

fisher union for washbasin or sink (A) 32mm dia ,Rubber

Plug for sink and .pillar tap, capstan head, screw down

high pressure with screws, shanks and back nuts. (i)

15mm dia.(A) Vitreous China:(ii) Flat Back washbasin

550 mm x v 400mm size. (i) In white colour.

Item Rate In

Description of Item Quantity Unit Amount

No figures

24 Providing and laying water proofing treatment with 238.00 Sqm 1099.89

china mosaic tiles flooring over avg 50 mm C.C. 1:2:4

bedding for maintaining slope for plain and curve

surface & 12 mm to 20 mm of broken piece not more

than 2.5CM of ceramic / glazed tiles ( one for more

colour as directed ) to be laid over cement mortar

bedding of C M 1:3 (1 cement : 3 sand ) contain water

proofing materials per bag of cement useas specified by

manufactured and slops to be tempered to bring mortar

up to surface with using white cement and colour

pigment including rounding of junctions and extending

them up to 15 cm along the wall and curing with bends

any patens or design as per drawing and cleaning by

using oxalic acid etc. complete.

25 Providing and laying cement concrete 1:2:4 (1- Cement : 8.00 Cum 3683.33

2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

26 Providing and fixing pre-cast Rubber Dye / steel Dye 66.65 Sqm 686.90

inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to

IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete.

27 Providing and fixing FRP frame size 125x65 mm and 8.00 Sqm 2019.97

35mm thick FRP shutter with wood grain raised

panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish.The

core of the shutter & frame is to be filed up with injected

polyurethene foam done in situ alongwith embedded

woodenpieces for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter is to be water

proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with

fastener sleeve & alluminium fixtures & fastenings.

28 Provoding and fixing flush door shutters, solid core 11.00 Sqm 2615.04

construction with frame of first class hardwood with

cross board and face veneer or plywood face panels,

including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block

board core anodised alluminium butt hinges in flush

door shutters (2) 35 mm thick.

Item Rate In

Description of Item Quantity Unit Amount

No figures

29 Providing and fixing kitchen platform trolley having 1.62 Sqm 16200.40

three drawers of SS (IS 304) of required size like thali,

katleri, perforated, partition, cupsosar type in kitchen

platform having drawer front side and backside by using

19mm thick all proof plywood of ISI quality all side

laminated etc. as directed. The size of SS (IS 304) basket

of size 4" to 18" for thali, dish, katleri, perforated,

partition, cupsosar type as directed including necessary

S.S. fittings, handles, nobs, telescopic channels, etc. as

30 Providing and fixing 25 mm thick shutters for cupboards 27.00 Sqm 3036.81

etc. including black enamelled M.S. butt hinges with

necessary screws. (A) Indian teak wood. (i) Fully

Total Rs.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and

words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Credit Value of Dismentalled Materials of Amount Rs. 14491.00 shall be recovered from the 1st

1 Running Bill of the Contractor.

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

2 Engineer-In-Charge for which no extra payment shall be made.

3 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

4 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

5 there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Vapi ( R & B ) Sub Division Valsad ( R & B ) Division

Vapi Valsad