Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.8 LAccepted-AOC | L1 | Accepted-AOC Award | |
| 2 | L2₹5.2 L+₹45,073.83 (9.51%)Rejected-Finance VILLAGE KARLWHAN P O BHARGAON TEHSIL KOTLI DISTT MANDI HIMACHAL PRADESH | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹5.5 L+₹75,103.56 (15.8%)Rejected-Finance | L3 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | Akshay kumar cont. L2 | KSHITIJ THAKUR L1 | kamlesh kishore L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge. | 358 | Cum | 400 ₹1,43,200 | 394.1 ₹1,41,087.8 Lowest | 410 ₹1,46,780 |
| 2.00 | Cutting of GI Pipe of various dia with generator welding set including carriage at site of work complete in all respect in all leads and lifts. 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, 125mm, & 150mm dia:- | 17,380.95 | CM | 3.8 ₹66,047.61 | 2.7 ₹46,928.57 Lowest | 3.95 ₹68,654.75 |
| 3.00 | Welding of GI Pipe of various dia with Diesel Generator Welding set at site of work according to site requirement in minimum three layers to make the joint leakproof according to relevant BIS Standards/Approved specifications and to the entire satisfaction of the Engineer-In-Charge complete in all respect in all leads and lifts. 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, 125mm, & 150mm dia:- | 47,685.18 | CM | 6.5 ₹3,09,953.67 | 6 ₹2,86,111.08 Lowest | 7 ₹3,33,796.26 |
Tender Value
₹4.7 L
EMD Value
₹9,500
Closing Date
26 Aug 2025, 5:00 pmClosed
Executive Engineer
EE JSV Mandi
Restoration of GI pipe with Cutting and welding of 25mm 32mm 40mm 50mm 65mm 80mm 100mm 125mm and 150mm at Hospital Area Bari Matt and Sain Muhalla
2025_HPIPH_112640_1
6324-53
Open Tender
Civil Works
Item Rate
90 days
Mandi
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹9,500
29 Sept 2025
21 Aug 2025
26 Aug 2025
21 Aug 2025
26 Aug 2025
21 Aug 2025
Amount
Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge.
Cutting of GI Pipe of various dia with generator welding set including carriage at site of work complete in all respect in all leads and lifts. 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, 125mm, & 150mm dia:-
Welding of GI Pipe of various dia with Diesel Generator Welding set at site of work according to site requirement in minimum three layers to make the joint leakproof according to relevant BIS Standards/Approved specifications and to the entire satisfaction of the Engineer-In-Charge complete in all respect in all leads and lifts. 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, 125mm, & 150mm dia:-
Akshay kumar cont. (BID ID -547515)
kamlesh kishore (BID ID -547520)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .