GE863/EWS-T-32 OF 2020-21

Amount

Dismantling plain or corrugated steel sheeting (Roof covering) of any description or any gauge or thickness complete all as specified and directed.

Demolition of brick /block or stone measonry built in cement mortar, complete all as specified and directed.

Dismantling wall and ceiling boards of any description or any thickness including cover fillets complete all as specified and directed.

Dismantling floor hearth and wall tiles including cement mortar bedding (but not backing) and removing from site complete all as specified and directed.

Demolition of cement concrete terrazo (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level), complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) and removing from site, area not exceeding 1.5 Sqm each, complete all as specified and directed.

All as per above item No. but area exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed.

Taking down of shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as specified and directed.

S&F rolled mild steel Fe -290(Gde E-165) for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified and directed.

S &F Galvanised, corrugated mild steel sheeting, 0.63 mm thick, with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in roofs etc. with grade of zinc coating 275 in repairs complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering with self tapping screws complete all as sepcified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering with self tapping screws as in ridge complete all as sepcified and directed.

S &F Plain, galvanised, mild steel sheeting, 0.80 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 in repairs complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry in 1:3:6 type C1 using 20mm graded stone agg with solid block exc 10cm width and setting in CM 1:6 complete all as specified and directed.

S &F 10 mm thick PVC insulation panels with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceilling, including GI frame work for seamless celling grid frame work, size of grid 605 X 605 mm for false ceilling, hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40X3 mm size 60 mm long complete all as specified and directed.

M&L for Vitrified tiles of 10mm thick (square/Rectangulur), polished area of each tiles n.exc 0.36 Sqm as in floor etc sat and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick cement screed bed or bedding layer in CM 1:6 complete all as specified and directed.

All as per Item No 17 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

S&F 450x300x7mm thick glazed ceramic concept tile coloured {Superior/Premium quality} on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick cement mortar rendering in CM 1:4 complete all as specified and directed.

M&L for chequered cement concrete tiles 300x300x25mm thick, machine pressed (rubber mould type) confirming to IS 13801; set jointed and pointed in neat cement slurry in floors laid on 15mm thick in CM (1:6) screed bed or bedding layer with grey cement and pigment complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring complete all as specified and directed.

M&L for machine pressed precast interlocking paver block any shape and size conforming to IS -15658-2006 of 80mm thickness M-40 Gde with grey cement and pigment over and including 25mm thick sand cushioning complete all as directed.

M&L for 50mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection path laid in alternate panels not more than 3mtr in length laid to slope 1:30 including forming joints 10mm wide and upto full depth of PCC and filled with bitumen mastic (1:3) part bitumen 85/25 and 3 parts of sand complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate as in sub base of floor and path, complete all as specified and directed.

S&F Pressed steel frames size 105 x 60 mm for doors with one or more rebates incl. necessary fixing lugs, 100 mm long hinges welded with frams, lock strick plate, etc and filling hollow frames with PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate complete all as specified and directed.

S&F Pressed steel frames size 125 x 60 mm for doors with one or more rebates incl. necessary fixing lugs, 100 mm long hinges welded with frams, lock strick plate, etc and filling hollow frames with PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate complete.

S &F 2nd class hard wood Plain, solid, straight chowkats and frames , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 40mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick plain, framed, panelled shutters(any no of panels) with panels of timber flat on both sides (feather edge) or of veneered partical boaed medium density, wood pertical board with commercial face veneers; supply and fix two chowkats complete all as specified and directed.

S&F 2nd class hard wood 30 mm thick Glazed and skelton shutters, open rebeated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkat complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to this stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification and drawing all as specified in SSR Part-II 2010 section 8.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, complete all as specified and directed.

S&F Aluminum anodized frame for doors, windows, ventilators powder coating (Minimum thickness of powder coating not less than 50 micron) with one or more rebated including jointing cleats for fixing etc complete all as specified and directed.

S&F Aluminum anodized door shuttes, aluminum section weighing 0.55 Kg/m including necessary, jointing cleats, glazing clip, rubber neoprene packing handles two nos in each door, hinges three nos in each leaf, anodized snap beading screws etc powder coating of any colour (Thickness of powder coating not less than 50 micron) complete all as specified and as specified and directed.

S&F Aluminum anodized window and ventilator shutters side hung type without sash , aluminum sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing anodized aluminum snap beading screws anodized aluminum fittings such as peg stays 150mm long (one no) hinges type B-21 100mm long (2 no) suitable handle (01 no) for each leaf ,powder coating of any colour (Thickness of powder coating not less than 50 micron) complete all as specified and directed.

S&F Mortice brass lock vertical type size 100mm with 4 levers complete all as specified and directed.

S&F floor spring double action hydraulically regulated made up of min 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty ISI Marked fixed in position, complete all as specified and as specified and directed.

S&F aluminum (extuded section) body door closer hydraulically regulated designation No 3 universal type, suitable fo door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg. complete all as specified and as specified and diected.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded, complete all as specified and directed.

S&F in repair 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 200mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed.

S&F 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed.

S&F aluminium handle fabricated type anodized 150mm with cadmium plated wood screws complete all as specified and directed.

S&F aluminium handle fabricated type anodized 100mm with cadmium plated wood screws complete all as specified and directed.

S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and directed.

S&Fin repairs mild steel 300mm ordinary rat tail rod pattern springs including roller, roller plate, complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from Wdn or steel frames glazed with putty or fixed with beads, complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares area not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

M&L for mild steel work as hold fast made up of flats iron of size 25x3mm conforming to FE 290 Gde -E-165 complete all as specified and directed.

Taking up or down 15 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and as directed.

Taking up or down 20 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and as directed.

Refixing old steel tubing and connection 15 mm bore in new or old position in wall, ceiling and floor etc complete all as specified and directed.

S&F 15mm medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc all as specified and directed.

Refixing old steel tubing and connection 20 mm bore in new or old position in wall, ceiling and floor etc complete all as specified and directed.

S&F 20mm medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc all as specified and directed.

S&F in repairs 15 mm dia stop cock of cast copper alloy but fancy type chromium plated screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs 15mm Bib taps, fancy type CP cast copper alloy with crutch or butter fly handle, screwed down, or secrewed for iron pipe or for brass ferrule complete all as directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in replacement brass CP mixer tap 15 mm bore, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot or cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair vitreous china squatting pan `Orissa’ pattern, size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with ‘P’ or ‘S’ trap including provision of lime concrete bedding complete all specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squat pattern /pedestal pattern water closet (Flush shall be fixed at suitable height for smooth functioning ) complete all specified and directed.

S&F PVC connection 15mm bore with PTMT nuts and 750mm long complete all specified and directed.

S&F in repair vitreous china wash hand basin, white flat back size 550x400mm complete including necessary cutting for and pinning in ends of brackets ) including brackets and 750mm long PVC waste pipe 32mm bore & waste coupling 32mm dia of PTMT (half or full threaded) complete all as specified and directed.

S&F 20 mm dia stop cock of copper alloy screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed in repair complete all as directed.

S&F in repairs 19/20 mm dia curtain rails mild steel chromium plated with fixing brackets, stops, roller etc, complete all as specified and directed.

S&F in repair rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered 500 Ltr capacity, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection complete all as specified and directed.

All as per item No above but exc.500 and n.exc 1000ltr capacity complete all as directed.

Taking down cement plaster on walls and ceiling, any description, including raking out joints in brick walls, hacking for key and scrubbing down with water etc., on walls and ceiling complete all as directed., complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:4) on external surfaces of brick work finished fair and even , complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint complete all as specified and directed.

Preparation of new wall surface, and applying three coat of White wash complete all as specififed and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over 1mm thick wall care putty on walls, complete all as specified and directed.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 34760.00

PRITPAL SINGH