MGNREGS MATERIAL SUPPLY FOR ANGANVADI CONSTRUCTION

Laying and Jointing PVC Pipe. Heading

100 mm S.C.I. trap with vent heel

15 mm C.P.brass tap

200 mm Aluminium aldrop

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Adjustable span ESO+SI (2.35-3.40)

Adjustable telescopic prop 3 m (2.02-3.75m)

Aluminium T or L Sections

Anodised Aluminium handles 125 mm with plate 175 x 32 mm

Anodised Aluminium tower bolt (barrel type)300x10 mm

Beam clamp 300-380 mm (450-1070 mm)

Black Japan

Brass 100 mm mortice latch and lock with 6 levers without pair of handles

Bright finished or black enameled mild steel screws 20 mm

Bright finished or black enameled mild steel screws 40 mm

C.I. bracket for wash basin and sinks

C.P. brass waste 32 mm

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Chromium plated Brass screws 20 mm

Chromium plated Brass screws 25 mm

Chromium plated Brass screws 30 mm

Coarse sand (zone III)

Column clamp 450x1070 mm

Corner angle 45x45x5 mm 2.50 long

Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile

Fine sand (zone IV)

Flats up to 10 mm in thickness

Float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 Kg/ sqm)

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

Hard board 6 mm thick

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Interlocking C.C. paver block (80 mm thick, M-30)

Iron hooks & eyes 100 mm

Mild steel round bar 12 mm dia and below

Multi surface paint

Neoprene / EPDM rubber gasket

Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock

Polyethylene water storage tank with cover and suitable locking arrangemnet

Portland Cement

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

Powder coating 50 microns on aluminium sections

Prop 2 m (2-3.5m)

PTMT - Soap Dish/Holder 138x102x75 mm

PTMT - Towel Rail (600 mm)

PVC bend 110 mm dia

PVC door Elbow 110 mm dia

PVC pipe 110 mm outer dia 6kgf/cm2

PVC pipe 25 mm outer dia. 10kgf cm2

PVC pipe 63 mm outer dia . 6kgf/cm2

PVC Socket/coupling 110 mm dia

PVC Socket/coupling 63 mm dia

PVC Tee 110x110x110mm dia

PVC vent cowl 63 mm dia

Quarry Waste

Rawl plug 50 mm (designation 10 nos)

Rectangular shape 453x357 mm Mirror with Plastic moulded frame

Red oxide Zinc chromate primer

Second class kail wood in planks

Second class kail wood in scantling

Second class teak wood in scantling

Solid blocks of size 30x20x15cm

Solid blocks of size 30x20x20cm

Solid blocks of size 40x20x10cm

Special primer (C.W)

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Stone Aggregate(single size): 06 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Stone for masonry work

Structural steel such as tees, angles, channels and R.S. joists

Synthetic enamel paint in black or chocolate shade

Through and bond stone size 24 x 24 x 39cm

Twisted steel/deformed bars

Vibrator (Needle type 40 mm)

Vitreous China flat back wash basin 630x450 mm

Vitreous China orrisa type w.c. pan size 580 mm

Vitrified floor tile 60x60 cm

Wall form panel 1250x450xmm

Welding by electric plant