PROVN OF TEMPORARY PORTA CABIN OFFICE ACCN WITH ATTACHED TOILET AND SINGLE LIVING IN ACCN AT AF STN DEESA UNDER GE AF BARODA

Amount

Surface excavation averaging 15cm deep and getting out in hard/dense soil including cleaning away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots and trees not exceeding 30 cm girth and removing rubbish up to a distance 50M outside the periphery of the area under clearance.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard / dense soil all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well raming in layers, not exc 25cm thick in soft / loose soil all as specified and as directed

Removing excavated material n. exc 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and all as specified.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation ,mass concrete etc.complete all as specified & directed by Engineer- in-charge.

M & L for brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 on brick/concrete surfaces finished fair and even without using extra cement complete all as specified and as directed.

M &L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed by Engr-in-Charge.

M&L for hard core using broken boulders of gauge n.exc. 63mm deposited ,spread,levelled in layers n.exc.15cm thick watered and rammed to a true surface.

M&L for 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base to receive floor finishes complete all as specified & directed by Engineer- in-charge.

M & L for 50 mm thick plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in floor finishes, finished fair and even complete all as specified and as directed by the Engineer-in-Charge

M&L for 75 mm thick cement concrete type C2 1:3:6 ( 40 mm graded aggregate) as in plinth protection all as specified and as directed by Engr-In-Charge

M&L for MS Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

M&L for preparation of new surfaces of steel or iron over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer Complete all as specified and as directed

S&F Rotational moulded polyethylene water storage tank 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing tank and removing under sch of credit

Supply and install split Air conditioning unit (White), inverter type with split units Indoor/outdoor with insulated copper tubing, Copper condenser coil, precision cooling technology, dual rotor inverter technology, R32/ R22 / R410 or any other ecofriendly refrigerant, Brushless DC motor, 4-in-1 Convertible Cooling, auto clean, Magic Display ecofriendly refrigerant, copper wound rotary compressor complete with cordless remote control unit, Stand for outdoor unit and dust filter for batter indoor air quality, 5 star rating ISEER 5 and of capacity 1.5 TR as comprising of the following: (a) 1.5 Ton capacity using Eco friendly refrigerant cooling unit wall mounting type complete with remote control draining out arrangement manually adjustable cover for cool air from front with and inter connection with the condensing unit etc all as specified and directed by Engr-in-charge. (b) One No condensing unit of 1.5 ton capacity comprising of all fitting such as single phase electric driven compressor, condensing fan motor, condensor with fixing of stand on wall and all necessary controls and accessories all as specified and directed by Engr-in-charge. Note :- (i) Additional length for copper tubing if required at site shall be supply and fix by the contractor without any extra cost. (ii) Rate included for filling of hole with white cement/POP and also wall to be matched with existing treatment.

Supply and fix Voltage stablizer of capacity 3 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stablized at 230 V with accuracy of + 2.5% all as specified and as directed by Engr-in-Charge /GE.

M&L for RCC NP3 150 mm diameter Pipes for depth 0.7m to 1.65m laid on150 mm thick bed PCC 1:4:8 with and including excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional complete all as specified and directed by Engr-in-Charge/ GE.

M&L for 10 user capacity conventional type on site LLDPE septic tank designed to carry sewage and sullage water, including excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete job all as specified and directed by Engr-in-Charge/ GE.

M&L for soakage wells of size 1.8M dia and 3.0 M effective depth, excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of appropriate size complete Job all as specified and directed by Engr-in-Charge/ GE.

M&L for Surface excavation not exc 30cm deep and averaging 15 cm deep and getting out in Hard/dense soil complete all as specified and directed

Removing excavated material to a distance not exc 50 mtr and depositing where directed to level not exc 1.5 mtr above the starting point complete all as specified and as directed

M&L for hardcore of broken stone or boulder of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed by engr-in charge.

M & L for 75 mm thick plain cement concrete 1:4:8, type D2 using 40 mm graded stone aggregate as in sub base and finished even and rough to receive floor finishes complete all as specified and directed by engr-in charge.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and colour pigment , complete all as specified and as directed by Engr-in-Charge.

M&L for Sand filling under floors or in foundations including watering and consolidation in layers, complete all as specified and as directed by Engr-in-Charge.

M&L for plain cement concrete 1:3:6, type C1 using 20 mm graded stone aggreates as in side coping to chequerred tiles all as specified and as directed by Engr-in-Charge.

M&L for excavation in post holes each n.exc 0.50 cum and getting out any type of soil, returning filling in layers not exceeding 25 cm and ramming and removing extra excavated soil to a distance n.exc 50m all as specified and as directed by Engr-in-Charge.

M &L for cement concrete 1:3:6 type C2 (using 40mm graded aggregate) as in foundation of post holes and mass concrete complete all as specified and as directed by Engr-in-Charge.

S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

M&L for Mild steel screw bolts 5 to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n exc 5cm long complete all as specified

Supply only Mild steel round bars 10 mm dia Fe 290 (Gde -E-165), as in line wire to chin link fencing all as specified and as directed by Engr-in-Charge.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work including pintle hinges, stops, hand made sliding bolts etc incl ornamental and intricate design conforming to Fe.290.Gde-E-165 Complete all as specified and as directed by Engineer-in-Charge.

Fixing only PVC coated Chain link fencing including cutting bending of line wires if required, any mesh, size and type of standards, rails, straining bolts, etc. including mild steel wire not less than 0.9 mm dia or securing with clip quality complete

Supply only 3.8mm dia PVC coated steel wire, chain link of size 50 x 50mm mesh, PVC coated (colour will be decided by GE) made into , laped, wired laid in position all as specified and as directed by Engineer-in-Charge.

M&L for rendering 10mm thick in CM 1:4 on fair face of brick or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Removing excavated material (all kind of soil) exc 1.5 KM and n.exc 5.0 KM depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed

M & L for preparing plastertered surfaces and applying three coats of white wash over new wall surfaces.

M&L for 30 user capacity conventional type on site LLDPE septic tank designed to carry sewage and sullage water, including excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete job all as specified & as directed by Engr-in-Charge/ GE.

S&F Steel porta cabin consisting one room of size (6.00 x 3.00 x 2.50m)consisting of MS base frame 100mmx50mm "C" channel, stiffener bottom 100mmx50mm(1 beam), Panelling outside non corrosive GI sheet, Internal wall panelling 8mm thick MDF OSL sheet. Bottom flooring 18mm cement fiber board fixed by means of self tapping screws and Vinyl carpet on panel. Out side roof shall be of non corrosive GI sheet properly slopped and 8mm thick Plain white MDF board in false ceiling. Outer side of the cabin to be painted with one coat of epoxy primer with two coat of epoxy paint. Glass wool of density 16Kg/Cum to be provided. double shutter sliding window with glass and mosquito proffing and provision of security grill. All wiring shall be concealed type and shall be of copper wire. All fittings in the portable cabin shall be 220-240V, AC 50 Hz tube door light, fan, switches, scocket, telephone, AC point wiring. Earthing point to be provided at appropriate place; all as specified and directed by Engineer-in-Charge :- The following features to be provided in the main cabin :- (a) One main doors 6ft x 3 ft (b) 04 windows 3ft x 3 ft with iron grill (c) Six Nos LED lights 12 Watt (d) Four Nos PVC cabin fan 400mm (e) One Bulk Head LED light 10 watt above the door (f) Vinyl flooring (g) Two power point for AC with metal porcelain socket and metal plug top clad switch with 16 Amps MCB SP. Note : The steel porta cabins shall be fixed on brick work as per manufacturer's instructions and as directed by Eng-in-Charge/GE..

S&F Portable Bunk House of size (2.40X3.00m) suitably divided into two parts with partition board to cater one toilet and one kitchenette. The porta cabin will contain the following features :- (a) Two Main Doors (6ft x3ft ) (b) 04 LED lights 12 watts & 02 PVC exhuast fans 300mm dia with louvers. (c) 01 Bulk head LED light of 10 watt above the floor (d) Vinyl flooring, One EWC with flushing cistern, One number wash hand basin and two number urinal with all connected fittings and fixtures. (e) One kitchen sink with drain board (with waste coupling and waste pipe) with provision of water tap and connection, one cooking platform of size 2.4 x 0.6 mtr (f) One power point for AC with metal porcelain socket & metal plug top clad switch with 16 amps MCB SP including Instant Geyser 10 Ltr capacity, energy efficient, with fixture and connections including hot & cold water tap. Note : (a) Specification of bunk house shall be same as per item No 40 above (b) The toilet shall be made functional in all respect by the means of water supply and provision of waste pipes etc.

S&F Steel porta cabin consisting one room of size (6.00 x 3.00 x 2.50m) consisting of MS base frame 100mmx50mm "C" channel, stiffener bottom 100mmx50mm(1 beam), Panelling outside non corrosive GI sheet, Internal wall panelling 8mm thick MDF OSL sheet. Bottom flooring 18mm cement fiber board fixed by means of self tapping screws and Vinyl carpet on panel. Out side roof shall be of non corrosive GI sheet properly slopped and 8mm thick Plain white MDF board in false ceiling. Outer side of the cabin to be painted with one coat of epoxy primer with two coat of epoxy paint. Glass wool of density 16Kg/Cum to be provided. double shutter sliding window with glass and mosquito proffing and provision of security grill. All wiring shall be concealed type and shall be of copper wire. All fittings in the portable cabin shall be 220-240V, AC 50 Hz tube door light, fan, switches, scocket, telephone, AC point wiring. Earthing point to be provided at appropriate place; all as specified and directed by Engineer-in-Charge :- The following features to be provided in the main cabin :- (a) One main door 6ft x 3 ft (b) 04 windows 3ft x 3 ft with iron grill (c) Six Nos LED lights 12 Watt (d) Four nos PVC cabin fan 400mm. (e) One bulk head LED light 10 watt above the door.. (f) Vinyl flooring (g) Two power point for AC with metal porcelain socket and metal plug top clad switch with 16 amps MCB SP. (h) Four numbers bunk bed made of Mild Steel with plytop Note : The porta steel cabins shall be fixed on brick work as per manufacturer's instructions and as specified and directed by Engr-in-Charge/ GE.

All as per item No 42 here-in-before but of size (3.600 x 3.00 x 2.50m) and including the following features :- (a) Two main doors 3 ft x 6ft (b) 03 windows 3ft x 3 ft with iron grill (c) Six Nos LED lights 12 Watt (d) Two Nos PVC cabin fan 400mm. (e) One bulk head LED light 10 watt. above each door (f) Vinyl flooring (g) Two power point for AC with metal porcelain sockt and metal plug top clad switch with 16 amps MCB SP. (h) One number bunk bed made of Mild Steel with plytop

S&F Portable Bunk House Toilet of size (6.00X3.00m) suitably divided with partition board. The toilet block will contain the following features :- (a) One Main Door (6ft x 3ft) and Four Nos bathroom Door(6ft x 3ft) (b) Six Nos LED light 12 watts & 04 Nos 300mm PVC exhaust fan with louvers. (c) One Bulk Head LED Light 10 watt above the door. (d) Vinyl flooring, three EWC with flushing cistern, Three showers with tap, Three Nos Wash hand basin and Three Nos Urinal. (e) Two power point to Geyser with metal porcelain socket and metal plug top clad switch with 16 amps MCB SP incl 02 Nos Instant Geysers 10 Ltr capacity with fixtures and connections incl hot & cold water tap. Note : (i) Specification of bunk house shall be same as per item No 42 above (ii) The toilet shall be made functional in all respect by the means of water supply and provision of waste outlet pipes etc.

M/S Tanisha Traders (BID ID -3427446)

divyarsh entrprise (BID ID -3430038)

Parth Infrastructure Pvt. Ltd. (BID ID -3429942)

Abhishek Enterprises (BID ID -3429994)

THE SHIVAM ENTERPRISES (BID ID -3427933)