Construction of Community Sanitary Complexes at Aswardha Narayana Swmy temple at Chinnapappur village of Peddapapur mandal

Earthwork in excavation for foundations as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Filling with Sand in plinth from approved quarry /available sources in layers consolidating each deposited layer by watering and ramming including all operational, incidental, labor charges, hire charges of T & P etc., complete for finished item of work as per technical specification Clause 305.3.9 MORD & 304 MORTH

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work for Foundations

RCC (1:1.5:3) for footings corresponding to Table 9 of IS 456 using 20mm HBG M/C Metal from approved quarry including cost and conveyance of all materials and including operational, incidental, machine mixing, vibrating, centering, scaffolding charges, curing etc., complete., but excluding cost of steel and its fabrication charges for finished item of work_For Footings

RCC (1:1.5:3) for Plinth beam corresponding to Table 9 of IS 456 using 20mm HBG M/C Metal from approved quarry including cost and conveyance of all materials and including operational, incidental, machine mixing, vibrating, centering, scaffolding charges, curing etc., complete., but excluding cost of steel and its fabrication charges for finished item of work. For Columns

RCC (1:1.5:3) for Plinth beam corresponding to Table 9 of IS 456 using 20mm HBG M/C Metal from approved quarry including cost and conveyance of all materials and including operational, incidental, machine mixing, vibrating, centering, scaffolding charges, curing etc., complete., but excluding cost of steel and its fabrication charges for finished item of work. For Plinth Beam

RCC (1:1.5:3) for Plinth beam corresponding to Table 9 of IS 456 using 20mm HBG M/C Metal from approved quarry including cost and conveyance of all materials and including operational, incidental, machine mixing, vibrating, centering, scaffolding charges, curing etc., complete., but excluding cost of steel and its fabrication charges for finished item of work. For Baffle Wall

RCC (1:1.5:3) for Plinth beam corresponding to Table 9 of IS 456 using 20mm HBG M/C Metal from approved quarry including cost and conveyance of all materials and including operational, incidental, machine mixing, vibrating, centering, scaffolding charges, curing etc., complete., but excluding cost of steel and its fabrication charges for finished item of work. For Lintels

RCC (1:1.5:3) for Plinth beam corresponding to Table 9 of IS 456 using 20mm HBG M/C Metal from approved quarry including cost and conveyance of all materials and including operational, incidental, machine mixing, vibrating, centering, scaffolding charges, curing etc., complete., but excluding cost of steel and its fabrication charges for finished item of work. For Septic Tank_125 mm thick roof Slab

Roofing with 0.5 mm thick galvanized/Pre painted G.I. profiled sheets fixed to the purlins with 14 size drilling screws with neoprene washer. Side laps arestitched with self tapping/drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove. (Rate as per SSR BMS-W.45 (CFMS CODE MAT-01615) and Sl. No: 980.

Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using hard granite stones from approved quarry including Cost and Conveyance of all materials like Granite stones, cement, sand, water, etc., to site including all operational, incidental Charges etc., Complete

Brick Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls for Super Structure walls.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work. _Inside Walls

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work._Outside Walls

Painting to New Walls with two coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter.of superior quality of approved brand and shade over base coat of cement primer of approved brand, making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for_Internal Walls.

Painting to New Walls with two coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter.of superior quality of approved brand and shade over base coat of cement primer of approved brand, making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for_External Walls.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1to15) of any colour and finish in all shades and Designs set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707)

Dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and Designs and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707)

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. (BMT-N.83.A)

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame. (BMT-N.92)

Providing High Yield Strength Deformed (HYSD/Thermo Mechanically Treated (TMT)/Mild Steel (MS) steel bars (Fe 500 graded as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes etc., Complete

Providing high yield strength deformed (HYSD) steel MS bars for Grills, cutting, bending & forming grills for reinforcement work as per approved designs and drawings including Cost and Conveyance of bars from approved sources to site of work with all taxes complete for finished item of works

Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges for placing and fixing in position

S & F CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia of Indian make Seiko or equivalent including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors.

Supplying and fixing PPR Ball valve as per ISI Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges etc. complete for finished item of work.

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm including cost and conveyance of all materials to site labour charges etc., complete for finished item of work for all floors

Supplying and fixing 580 mm x 440 mm long Orissa pan white glazed Water Closet 1st qualityISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer with brick masonry seat, CC squatting plate and fixing 12.70mm dia NP Push cock 1st quality , P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges etc., complete for finished item of work.

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.

Supplying and fixing PVC Nahani traps 100 mm (4") dia Inlet- 75 mm (3") outlet pipe - 4 Kgs 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.

Supplying and fixing of SWR/ PVC pipes (as per ISI standards) 4 Kg/Sq.cm. sudhakar/finolex or any ISI brand and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)_100 mm dia

Supplying and fixing of SWR/ PVC pipes (as per ISI standards) 4 Kg/Sq.cm. sudhakar/finolex or any ISI brand and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)_90 mm dia

Supplying & fixing Ashirvad/Astral flow guard for equivalent 28.60 mm dia CPVC Pipes with fittings in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges complete for finished item of work.

Supplying & fixing Ashirvad/Astral flow guard for equivalent 22.80 mm dia CPVC Pipes with fittings in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges complete for finished item of work.

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Esso or equivalent complete with standard CI brackets including wooden block ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 300 gms Seiko or equivalent including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work

Supply and Fixing of 20 mm outer dia 2.10 mm thick Heavy grade with IS:9537 part 3 FRLS regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required MS deep boxes and all accessories including and labour charges etc., complete. Makes:- VIP / Besto plast / GoldMedal / Million plast / GM / Sudhakar / Polyline

Supply and fixing of 25mm outer dia 2.20 mm thick Heavy grade with IS:9537 part 3 FRLS regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required MS deep boxes and all accessories including and labour charges etc., complete. Makes:- VIP / Besto plast / GoldMedal / Million plast / GM / Sudhakar / Polyline

Wiring with run of 2 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose/BH /SBH and 6A/10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B. Copper cable Makes: Makes: Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM Accessories Makes: Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/Koncept (Samrat/ Qura) /Ploycab(Levana)/ Anchor-Roma/ IndoAsian/ Pointer

Supply and fixing of 6A switchs - 2 Nos and 6A 3/2 pin socket - 2 Nos Modular type with cover plate and Suitable size modular box fixing on separate board including all labour charges etc., complete. Accessories Makes: Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/Koncept (Samrat/ Qura) /Ploycab(Levana)/ Anchor-Roma/ IndoAsian/ Pointer

Supply and run of 2 of 36/0.3mm (2.5 sq.mm) (phase neutral and earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits including labour charges etc., complete as required for switch boards. Makes: Finolex / RR kabel /Havells/Polycab/Gloster/ Goldmedal/GM

Supply, Fixing and Transportation of 20W/24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. with Fixing of 18W/20W LED luminaire on wall / Ceiling with / TW round blocks with all accessories including giving connections and all labour charges etc., complete.

Supply and fixing of 1200mm dia R.C.C. Collars (Rings) for Soak pit NP-3 MAT-05683

Collection,supply & filling of OTG Stones 65 mm thick including cost and conveyance of all materials etc complete

Collection,supply & filling of 40mm dia Coarse Aggregate including cost and conveyance of all materials etc complete

Collection,supply & filling of 20mm dia Coarse Aggregate including cost and conveyance of all materials etc complete

Collection and supply of 12m dia Coarse Aggregate including cost and conveyance of all materials etc complete

Supply and fixing of RCC Cover for Saok pit including all charges etc., complete.

Earthwork in excavation for foundations as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Filling with Sand in plinth from approved quarry /available sources in layers consolidating each deposited layer by watering and ramming including all operational, incidental, labor charges, hire charges of T & P etc., complete for finished item of work as per technical specification Clause 305.3.9 MORD & 304 MORTH

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work for Foundations

RCC (1:1.5:3) for footings corresponding to Table 9 of IS 456 using 20mm HBG M/C Metal from approved quarry including cost and conveyance of all materials and including operational, incidental, machine mixing, vibrating, centering, scaffolding charges, curing etc., complete., but excluding cost of steel and its fabrication charges for finished item of work_For Footings

RCC (1:1.5:3) for Plinth beam corresponding to Table 9 of IS 456 using 20mm HBG M/C Metal from approved quarry including cost and conveyance of all materials and including operational, incidental, machine mixing, vibrating, centering, scaffolding charges, curing etc., complete., but excluding cost of steel and its fabrication charges for finished item of work. For Columns

RCC (1:1.5:3) for Plinth beam corresponding to Table 9 of IS 456 using 20mm HBG M/C Metal from approved quarry including cost and conveyance of all materials and including operational, incidental, machine mixing, vibrating, centering, scaffolding charges, curing etc., complete., but excluding cost of steel and its fabrication charges for finished item of work. For Plinth Beam

RCC (1:1.5:3) for Plinth beam corresponding to Table 9 of IS 456 using 20mm HBG M/C Metal from approved quarry including cost and conveyance of all materials and including operational, incidental, machine mixing, vibrating, centering, scaffolding charges, curing etc., complete., but excluding cost of steel and its fabrication charges for finished item of work. For Septic Tank_100 mm thick roof Slab

Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work

Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using hard granite stones from approved quarry including Cost and Conveyance of all materials like Granite stones, cement, sand, water, etc., to site including all operational, incidental Charges etc., Complete

Brick Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls for Super Structure walls.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work. _Inside Walls

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work._Outside Walls

Painting to New Walls with two coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter.of superior quality of approved brand and shade over base coat of cement primer of approved brand, making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for_Internal Walls.

Painting to New Walls with two coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter.of superior quality of approved brand and shade over base coat of cement primer of approved brand, making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for_External Walls.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1to15) of any colour and finish in all shades and Designs set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707)

Dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and Designs and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707)

Supply and fixing of CPVC 25mm pipe including cost and conveyence of all Charges and all Labour charges Complete

S&F 12.70 mm NP elbow action bib cock 1st quality at all levels of size 12.70 mm dia including cost and conveyance of materials,labour charges etc, complete for finished item of work in all floors.

Supplying and fixing of 12.7 mm M.P. Couplings including cost and conveyance of all materials and labour charges etc., complete .

Supplying and fixing of 12.7 mm PVC connection with brass union nut CP Coated including cost and conveyance of all materials and labour charges etc., complete .

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame. (BMT-N.92)

Providing High Yield Strength Deformed (HYSD/Thermo Mechanically Treated (TMT)/Mild Steel (MS) steel bars (Fe 500 graded as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes etc., Complete

Supplying & Fixing Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm Long

Labour charges only for fixing Indian patternW.C with"P"

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - SingleC.P. Pillar cock

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supply and Fixing of 25mm dia 1.8mm thick P.V.C. pipe (ISI MARK) concealed in wall/floor / falceiling with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, modumlar moulded on metalic box covered with approrite front plate to switch with ceiling rose. including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings Makes : polycab /Delton /V-guard /A Roma /Crabtree

Supply and fixing of CFL Lamps 13/14W to batton/pendant holder with all cost, convyance of material labour charges etc. complete.

Supply and fixing of 1.20 mtrs RCC rings

110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm

Cost of 110mm dia PVC Elbows

Cost of 110mm dia PVC "T"

Cost of 20mm dia CPVC Elbows

Cost of 20mm dia CPVC"T"

Cost of 20mm dia CPVC "Taps"