SPECIAL REPAIR TO SMQ BLOCK 758 AND PROVISION OF SUBMERSIBLE PUMP SET ALONG WITH CONNECTED ITEMS AT NDB GANDHINAGAR AREA AT AF STATION UNDER GE (AF) JAMNAGAR NO.2

M&L chipping / dismantling of loose damaged concrete removed carefully by using mechanical concrete upto good parent concrete to expose the existing reinforcement (direct hammering should be avoided) average thickness of chipping average 20 -70 mm alround lintel / beams / column upto 10 mtr height including scffolding complete all as specified and directed.

Supplying and application of rust remover / converter (rebaklense RR of M/S fosroc chemicals India ltd or or equivalent as approved) over the corroded reinforcement bar where ever/Polymer modified mortar micro concreting is required and cleaning the same after application incl cost of all materials, rent of tools, scaffolding, cost of brushes etc. upto 10 mtr height complete all as specified and directed.

M & L for grouting of all RCC structure with Low viscous two parts of epoxy (Mixed in ratio as specified by manufacturer) Neofill LV by using preassure pump including drilling necessary holes of required size at distance of about 30 to 50 cm centre to centre as required, fixing of PVC Nozzles by quick setting ready made epoxy based plugging putty ,Scaffolding, and preassure grouting with compressor at about 1kgf to RCC beams/chajjas/slabs/coulumns at all heights as per manufactureres instruction and as directed by Eng- IN Charge upto 10 mtr height. Make of Low viscous epoxy shall be Neofill of M/s Fosroc/EPCO-KP-250+EPCO -250 of M/s Krishna conchem or equivalent of FOSROC, PIDILITE, HARIOM POLYMERS (P) LTD / SIKA

Supplying and application of nitobond EP (Manufactured by M/s Fosroc chemicals India Ltd, Krishna conchem or equivalent as approved, epoxy bonding agent over the old concrete surfaces including the cost of all materials, rent of tools, scaffolding, cost of paint, brush etc upto 10 mtr height complete all as specified and directed.

M/L for rendering 20 mm thick polymer modified mortar over face of Concrete of couloum / beams etc for height upto 10 mtr in CM mortar 1:3 along with adding up of SBR latex of M/s Fosroc or equivalent as per manfactueres instruction and finishing even and smooth complete all as specified and directed. Note : (a) SBR latex will be measured and Paid seperately. (b) Cost of scafflding upto 10 mtr height shall be deemed to be included in the cost.

Supply of SBR Latex or equivalent of M/s Fosroc complete all as specified and directed.

Supply and provisioning Renderoc RG (manufactured by M/S Fosroc chemicals India Ltd) to an average thickness of 50-70 mm for beam and Cloumn, fluid micro concrete shall be mixed with 6mm down coarse aggregate and specified quantity of water and mixed using a power operated slow speed stirrer and pouring inside the form work including the cost of all materials, rent for tools, scaffolding, form work and labour charges upto 10 mtr height complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

All as per item No 9 above but 6 to 8mm dia deformed bars in stirrups.

Removal of existing roof treatment consisting of screed bed, tar felts etc, and removal of debris outside MD land complete all as specified and directed.

Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate), (Avg 50 mm thickness) in roof for padding to achieve the 1:40 slope complete all as specified and directed.

M&L for rendering 10 mm thick on concrete surface whilst the concrete is green, in cement mortar (1:4) finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacturer instruction complete all as specified and directed. Note: WPC will be measured & paid separately.

M&L for water proofing treatment by applying one coat of oil base bituminous primer @ 0.3 Kg / Sqm with brush / roller, laying of 3 mm thick APP based polymer modified membrane reinforced non-woven polyester, weight not less than 3.50 Kg / Sqm and sealing all the over laps 100 mm in length side and 100 mm in width side of membranes laid with torch application complete all as specified and directed.

M&L for cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; with grey cement and no pigment, incl 15mm th screed bed in cm 1:6 and set jointed and pointed in neat cement slurry in floors, cut and polished complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Taking down steel water tubing and connection 15mm dia bore and removal from site.

Taking down steel water tubing and connection 20mm dia bore and removal from site.

Taking down steel water tubing and connection 25mm dia bore and removal from site.

Supply and laying of GI tubes of size 15mm, medium grade, galvanised, with all fitting; laid in trenches fittings on walls in any type of masnory or laying in floors complete all as specified and directed.

Supply and laying of GI tubes of size 20mm, medium grade, galvanised, with all fitting; laid in trenches fittings on walls in any type of masnory or laying in floors complete all as specified and directed.

Supply and laying of GI tubes of size 25mm, medium grade, galvanised, with all fitting; laid in trenches fittings on walls in any type of masnory or laying in floors complete all as specified and directed.

All as per item No 24 above but refixing of old pipes of 25 mm dia complete all as specified and directed.

Taking down rainwater/drain pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

M&L for repairing of chajja / roof projection by taking down old plaster, damaged concrete surface,cutting of exposed reinforcement and making good with CM 1:3 including admixture of SBR (cost of SBR including) as per manufacture, and provide reinft cement concrete 1:2:4 type B1 as required, necessary scafolding,formwork etc up to 9 Mtr heigh and applying 10 mm thick rendring in cement mortar 1:3 over new concrete surface, finishing the surface even & smooth with out using extra cement complete all as specified and directed. Note : Reinft will be paid separately.

Demolition of cement concrete in ground floor and pavings not exc 15 cm thickness below or above ground level, including removal of debris to outside MD land complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, including finishing the surface even and fair complete all as specified and directed.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris to outside MD land complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

M&L for Non skid, joint free (edgecut) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile exceeding 0.06 sqm but not exeeding 0.11 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for non skid, joint free (edgecut) coloured ceremic tiles 7 to 8 mm thick (square / rectanguler) size 600x600 mm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

All as per item No 40 above but in skirting over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) of size 300 mm x 450 mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L for machine cut & machine polished kota stone slab 20 to 25 mm thick as in kitchen plateform, flat or vertical, jointed with grey cement slurry mixed with colour pigment to match the shade of the slab, rubbing and polishing complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone slab flooring, treads etc over and including 15 mm thic screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone slab in riser of steps, skirting,dado and pillar laid over and including 10 mm thic plaster in CM 1:4 laid and jointed with grewy cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Labour only for rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and directed.

M&L for rendering 15 mm thick on brick / PCC block masonry wall surface in cement mortar 1:6, finished even and smooth without using extra cement and using water proofing compound complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and 5 mm thick in CM 1:4 as second layer incl. mixing water proofing compound and finished fair and even without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on PCC block masonry wall surface in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls & applying two coat of Distemper oil emulsion over a coat of primer over and including cement base wall cair putty on wall surfaces complete all as specified and directed.

M & L for preparation of old decorated surfaces of ceiling (plastered or unplastered) by brooming down , scrapping down smoke soot, moss and efflorescent salts and trading oil and greasy spots etc and applying two coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of new plaster surfaces of walls and applying two or more coats o 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltr/10 Sqm over and incl priming coat of exterior primer applied @ 0.90 ltr/10 Sqm over new surfaces complete all as specified and directed.

M&L for complete removal of existing treatment on old surfaces wall and application of 3mm thick wall care putty and applying two coat of distemper oil emulsion paint over a coat of primer complete all as specified and directed.

M&L for Complete removal of existing treatment and preparation of old plaster surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltr/10 Sqm over and incl priming coat of exterior primer applied @ 0.90 ltr/10 Sqm over new surfaces complete all as specified and directed.

M&L for preparation of new wooden surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.5 Sqm each, complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc. 2 sqm each complete all as specified and directed.

Resecuring or easing & adjusting after taking down the shutter of any description exc 1 Sam and n.exc 2 Sqm in same opening complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including stainless steel butt hinges 100 mm long, Aluminium tower bolt tower bolt 100 mm long and Aluminium handle 150 mm long as per specification and drawing complete all as specified and directed.

Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS tube supplying and fixing in opening as per specification and drawing in SSR Part-II complete all as specified and directed.

S&F second class hardwood plain, solid, straight chowkhats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick factory made second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass / gauge, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkhats complete all as specified and directed.

S& F in repair 18 / 19 mm thick plywood (12 Nos of ply) grade BWR, type BB fixed with screws to timber frame work or ply wood including 3 mm thick teak wood lapping on edge complete all as specified and directed.

Supply & paste 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm complete all as specified and directed.

S&F Magnetic catcher and connected plate to shutters and frame as per Sample complete all as specified and directed.

Supply fabricate & fix in position anodised aluminium powder coated (minimumthickness of powder coating 50 micron) three track window ( two shutters glazed ) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all two shutter, PVC roller etc all as specified below, complete all as specified and directed. (a) Frame (top & side) section shall be of size 92.00 x 31.75 x 1.50 mm (Section No 20831) (b) Frame (bottom) section shall be of size 92.00 x 31.75 x 1.50 mm (Section No 20832) (c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jidal, Contractor may use similar section of other make mention in Appx B

S&F aluminium (powder coated with approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frostade glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position complete all as specified and directed. Note:-(i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B.

S&F 100 mm size hasp and staples, safety type, aluminium anodised including bolt to hinge plate and fixed with screws etc, complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges medium weight, fixed to chowkhat complete all as specified and directed.

S & F 200 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S&F 150 mm long aluminium handle fabricated type anodised complete all as specified and directed.

S & F 250 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F mild steel framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165 complete all as specified and directed.

S&F Mild steel flat iron as in hold fast and similar work fixed to chowkhat complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) for fixing hold fast including necessary formwork, complete all as specified and directed.

S&F stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples to wooden shutters complete all as specified and directed.

S&F in repair 25 mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F in repair 15 mm size short body bib tap cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe complete all as specified and directed. Make : Prayag cat part PIS-06 or equivalent make as mentioned in Appx 'B' to PS.

S&F in repair 15 mm size long body bib tap with wall flange, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Prayag cat part PIS-08 or equivalent make as mentioned in Appx 'B' to PS.

S&F in repair 15 mm size angle cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. Make: Prayag cat part PIS - 10 or equivalent make as mentioned in Appx 'B' to PS.

S&F in repair 15 mm size concealed stop cock with wall flange all as specified and directed complete all as specified and directed. Make: Prayag cat part PIS - 18 or equivalent make as mentioned in Appx 'B' to PS.

S& F in repairs brass chromium plated overhead shower 100 mm size with 225 mm arm and flange for 15 mm inlet pipe complete all as specified and directed. Make : Prayag cat part No BS-73 or equivalent make as mentioned in Appx 'B' to PS.

S&F in repairs brass chromium plated towel rail 600mm long 20 mm dia D type complete all as specified and directed.

S&F in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs corner glass self including bracket etc complete all as specified and directed. Make : Prayag Cat No. 1951 or equivalent make as mentioned in Appx 'B' to PS.

S&F in repairs stainless steel peg set of Minimum 5 hooks fixed to wall complete all as specified and directed.

S&F in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete all as specified and directed.

S&F in repair stainless steel grating of size 150 mm x 150 mm fixed with white or grey cement complete all as specified and directed. Make : Prayag Cat No. FT-54 or equivalent make as mentioned in Appx 'B' to PS.

S&F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450 mm long PVC connection complete all as specified and directed.

S&F in repair cast iron floor trap 100 mm dia of outlet, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) (using 20 mm graded stone aggregate) complete all as specified and directed.

S&F in repair cast iron Nahani trap 100 mm dia of outlet, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate complete all as specified and directed.

Dismantling water tanks of capacity exc 250 and n.exc 500 ltrs complete all as specified and directed.

Supply and fix 500 litres capacity triple layer (white), rotational molded, polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of size 31" x 24" x 10" deep, fabricated with 0.63 mm sheet fixed in position on wall complete all as specified and directed. Make:- Prayag, Cat No. P-340 or equivalent make as mentioned in Appx 'B' to PS.

S&F in repairs stainless steel sink, 1.00 mm thick for kitchen, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495 mm x 420 mm, with bowl size 405 mm x 355 mm x 178 mm, Including 75 to 110 mm CP waste coupling, PVC flexible waste pipe complete all as specified and directed.

S&F in white vitreous china wash hand basin of size 580 x 440 mm, fixed over & including MS brackets comprising of the following items :- (a) Waste fitting 32 mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete. (b) 15 mm size Pillar tap cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe complete. (c) PVC waste pipe 32 mm dia 750 mm long complete.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, with plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connections complete all as specified and directed.

Supply and fix in repair white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 440 mm white with integral foot rests with ‘P’ or ‘S’ trap of cast iron 100 mm , front or back inlet including all connection and provision of lime concrete base complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removal of debries to outside MOD land complete all as specified and directed.

M &L for plan cement concrete type E-2 (1:5:10), using 40 mm graded stone aggregate, for filling sunken portion of toilet and similar work complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:3 on sunken portion of toilet on vertical / horizontal surfaces and mixing only water proofing compound as per manufacturers directions, finished the surface even and smooth without using extra cement including applying a coat of blown bitumen at the rate of 1.50 kg per square metre complete on all plastered surface and also on bottom of floor and filling the water in sunken floor at least 72 hrs for checking and testing of leakage and seapage of sunken floor complete all as specified and directed.

Demolition of brick / stone / PCC block masonry built in cement mortar including all quoins, pillars, arches etc. including removal of debris outside MD land, complete all as specified and directed.

M & L for precast cement concrete (1:3:6) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 in wall or pillars complete all as specified and directed.

Dismantling of 75 / 100 mm dia cast iron drain pipes, jointed in cement mortar fixed on wall complete all as specified and directed.

S&F 100 mm dia cast iron sand cast pipe, for soil, waste and vent in any length with or without ears, fixed on wall with MS clamp, with cement joints, complete all as specified and directed.

S&F 75 mm dia cast iron sand cast pipe, for soil, waste and vent in any length with or without ears, fixed on wall with MS clamp, with cement joints, complete all as specified and directed.

S&F 100 mm dia cast iron sand cast pipe, for soil, waste and vent in any length, laid in trenches, with cement joints, complete all as specified and directed.

S&F 75 mm dia bore CI oval access door bend (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100 mm dia bore CI oval bend (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100mm dia bore CI branch piece single, equal or unequal, ordinary or inverted (Spigot or socketed type) or paraler branches with oval access door complete all as specified and directed.

S&F 100 mm dia bore CI cowl complete all as specified and directed.

Demolition and breaking up 150 mm dia bore RCC / salt glazed stone were drain pipe including PCC packing under hunching against the sides of pipe bed and complete PCC of bed and removal of debris to a distance exc 1.5 Km but n.exc 5 Km complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc, n exc 10 Sqm on plan area and getting out in soft / loose soil complete all as specified and directed.

S&F 150 mm dia RCC hume pipe Class NP2 laid in trenches and jointed in cement mortar complete with collars complete all as specified and directed.

M/L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in packing under and haunching against the side of drain pipes for 150mm dia bore after they are laid and tested complete all as specified and directed.

Returning, filling in including spreading levelling watering and well ramming in layer n.exc 25 cm thick using excavated soil complete all as specified and directed.

Removing excavated soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping / benching to manhole and the like, weathering, slightly rounded or chamfered angles including necessary form work complete all as specified and directed.

S&F kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE office) of size 430 mm x 508 mm x 100 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position with and including one pair telescopic channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty complete all as specified and directed.

S&F kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE office) of size 430 mm x 508 mm x 100 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position with and including one pair telescopic channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty complete all as specified and directed.

Taking down carefully (copper / aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point including fixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces with distemper/white washing/colour washing as per existing complete all as specified and directed.

Taking down carefully by unscrewing from main switch boards/cut out boxes/MCB DBs / complete sealing the cable end and making good disturbed surface by walls etc. complete all as specified and directed.

Taking down carefully by unscrewing from fitting and fixtures such as ceiling fittings,bulk head fittings, tube light fittings, street light, flood LED lights etc complete all as specified and directed.

M & L for concealed point wiring with PVC insulated and unsheathed multistranded Fire retardant low smoke (FRLS) copper conductor single core 1.5sqmm (nominal area) cable using approved colour code as per IS drawn through heavy duty rigid non metalic PVC conduit not less 20mm dia including all accesories like bend, tess, junction boxes etc with all accessories soutable for moduler type fitmnet including making arrangement for fixing of moduler flush boxes of suitable size complete along with copper earth wire PVC insulated & unsheated multitranded (FRLS) copper conductor cable of size 1.5sqmm as continous earth wire connected to common earth and erth dolly complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or froof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed. Make of wire: L&T / RR Kabel / Finolex Make: of PVC conduit: Finolex/precision/prince Note : Modular metal boxes will be measured and paid seperately.

(a) One Light point /Fan point controlled by one switch

(b) One 3 pin socket outlet 5Amps on the same board with other switches

(c) One 3 pin 5 Amp socket out let controlled by one switch on independent board

(d) One bell / buzzer point controlled by one bell push 5 amp on the same board with other switches or independent

(e) One light point controlled by two 2-way switch with cable 1.5 sqmm

M & L for concealed point wiring with PVC insulated and unsheathed multistranded Fire retardant low smoke (FRLS) copper conductor single core 2.5sqmm (nominal area) cable using approved colour code as per IS drawn through heavy duty rigid non metalic PVC conduit not less 20mm dia including all accesories like bend, tess, junction boxes etc with all accessories suitable for moduler type fitmnet including making arrangement for fixing of moduler flush boxes of suitable size complete along with copper earth wire PVC insulated & unsheated multitranded (FRLS) copper conductor cable of size 2.5sqmm as continous earth wire connected to common earth and erth dolly complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or froof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed. Make of wire: L&T/RR Kabel/Finolex Make: of PVC conduit:Finolex/precision/prince

All as per item No 5 above but wiring with 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 4.0Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as continous earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch.

M&L for ceiling rose, 2 to 3 terminal PVC / polycarbonate, isolated body type suitable for AC 230volts complete all as specified and directed.

M & L for module cover plate with frame as per site requirement for following module complete all as specified and directed.

(a) 1 module

(b) 2 module

(c) 3 module

(d) 4 module

(e) 6 module

(f) 8 module

M & L for Modular metal Flush box as per site requirement.

(a) 1/2 module

(b) 3 module

(c) 4 module

(d) 6/8 module

M & L for modular switch 1 way 6 Amp 1 Module complete all as specified and directed.

M & L for modular switch 2 way 6A , 1 Module complete all as specified and directed.

M & L for modular socket 6A 2/3 Pin universal 2 module, complete all as specified and directed.

M & L for modular switch 1 way 16/20 Amp 1 Module, complete all as specified and directed.

M & L for modular socket 16A/ 6A 2/3 Pin combined 2 module, complete all as specified and directed.

M &L for modular fan step regulator 100 watt 2 module, complete all as specified and directed.

M & L for modular bell push 6A1 way, 1 Module, complete all as specified and directed.

Supply and fix in repair of lamp holder, white Polycarbonate body, with back plate suitable for batten fittings fixed in position & connecting complete all as specified and directed.

Supply and fix in repair of bell musical type AC 230 Volts, as directed including connecting complete all as specified and directed.

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed.

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 10 watt, channel housing & diffuser of length 600 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed.

S & F bulkhead fitting 10watt made die cast aluminium housing with complete assembly and PC opal diffuser suitable for surface/wall mounted dust and water resistant complete all as specified and directed.

Supply and fix in repair LED lamp 9 watt complete all as specified and directed.

Taking down carefully (copper/aluminium) submain wiring complete of any type (batten/surface conduit or concealed) for socket point or power point complete with all fittings such as swiches sockets pendants etc complete and making good distuebed surface of wall,floor or ceiling with plaster of tiles or roof treatment etc and finishing the surface with distemper white washing/colour washing to match with the existing surface complete all as specified and directed.

M&L for sub main wiring using PVC insulated and unsheathed multistranded FRLS copper conductor cable using approved colour code as per IS drawing in and incl PVC casing and capping with all accessories and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed of the following sizes of cables:-

Using two single core PVC insulated FRLS cable 6.0 sqmm copper conductor multi stranded and 6.0 sqmm copper conductor insulated cable using as earth wire Note :2 runs of 6sqmm copper cable & 1 run of 6.0sqmm copper cable in and including 20mm PVC casing and capping shall be measured as one unit

Using two single core PVC insulated FRLS cable 4 sqmm copper conductor multi stranded and 4.0 sqmm copper conductor insulated cable using as earth wire Note : 2 runs of 4sqmm copper cable & 1 run of 4.0sqmm copper cable in and including 20mm PVC casing and capping shall be measured as one unit

Using two single core PVC insulated FRLS cable 2.5 sqmm copper conductor multi stranded and 2.5 sqmm copper conductor insulated cable using as earth wire Note :2 runs of 2.5sqmm copper cable & 1 run of 2.5 sqmm copper cable in and including 20mm PVC casing and capping shall be measured as one unit

M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management,reversible door for for IP 43 , single pole and neutral 250 Volts, flush to wall complete with IP 43 protection complete all as specified and directed.

M&L for distribution board (DB), double door type as per IEC 61439-3 made out of sheet metal enclosure (CRCA Sheet) dust and vermin proof MCB DB, TPN 4 way with 250 Amps rated copper busbar, 415 Volts with in built MCCB 160 Amps, 10KA 01 No 2neutral bar and 2 earth bar IP 43 protection cable ties for cable management (fully insulated busbar and shrouded neutral bars) reversible door for IP 43, flush (concealed) mounting to wall including MCB SP 6 to 32 amp 10KA 12 nos complete all as specified and directed. Note:- Rates are inclusive for flush(Concealed) mounted of DB, MCCB 160Amp TPN,MCB SPN 32Amp and 63Amp.

M&L for MCB single pole & neutral 240 volt C curve 10 KA (32 to 63) Amps capacity IP 20 complete all as specified and directed.

M&L for MCB single pole,5 to 30 Amp 240 volt B curve 10 KA, IP 20 complete all as specified and directed.

Supply and fixing Exhaust fans AC single phase, 230/240 volts, 50 Hz, 300mm sweep metal body, 1400 RPM with louvers complete all as specified and directed including taking down old unsv, all as per site requirement.

Supply and fix exhaust fan AC single phase voltage 230V, 50 Hz, 1200 RPM, 200 mm sweep plastic body complete with louvers shutter, copper winding of sweep 250mm complete all as specified and directed. Note: Making of hole for fixing of exhaust fan in stone machinery bldg / aluminium window.

S & F energy efficient BLDC Ceiling Fan, 1200mm sweep BEE 5 star rated, AC single phase, 230 volts, 50 Hz, and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to ceiling fan complete in all respect and all accessories including taking down old unsv, all as per site requirement complete all as specified and directed.

Supply & Fixing 5 star rated electric storage water heater (vertical type) 25 Ltr, 230 V, AC, Single phase power input 2000w,standing loss in kWh 24 (hours) 45 °C 0.511 kWh with and including connecting fastners nuts not less than 100 mm with suitable nut, bolt & washers grouted in walls with complete masonary work for proper mounting of geyser fastning bolts etc as directed as site reqmt and making necessary inlet and outlet water connection as well as electric connection including testing on load for entire satisfaction of Engineer-in-Charge.

S&F building security in repair LED Light fitting 35 watt, system efficiency not less than 100 lumen / watt, IP66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting including taking down old light fitting of any description complete all as specified and directed.

S & F industrial type plug & socket board SP & N enclosure with 2 pole and earth metal plug & socket complete with 20 Amp MCB SP, complete all as specified and directed.

M & L for shifting of electric energy meter and re-arrange the same from inside of room to out side at suitable place as directed by Engr in Charge and refixing the same inside protective covering (PVC Box) to meter including connection of incoming and outgoing cables complete removing the existing unserviceable sub main wiring making good the distrubed surface complete all as specified and directed.

Taking up or down 25/40 mm bore steel tubing and connected fitting from wall, ceiling floor etc, cleaning the internal surface with descaling compound for removing scales and complete all as specified and directed.

Taking up or down 20 mm bore PPR pipe and connected fitting from wall, ceiling floor etc, cleaning the internal surface with descaling compound for removing scales and complete all as specified and directed.

S&F CPVC (Chlorinated polyvinyl chloride) schedule 40 confirming to ASTM D-1785 with threded ends pipes, 20mm bore with nominal outside diameter 26.5mm and wall thickness of 2.87mm suitable for working pressure of 33.10Kgf/cm2 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including brass threaded CPVC fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F GI tubing medium grade, ISI marked conforming to IS 1239 Part-I 2004, 25 mm bore with and including all fittings such as bends, elbows, tees, short length, socket , union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing complete all as specified and directed.

S&F GI tubing medium grade, ISI marked conforming to IS 1239 Part-I 2004, 40 mm bore with and including all fittings such as bends, elbows, tees, short length, socket , union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing complete all as specified and directed.

Supply and fixing of Gun Metal globe / Gate valve 40 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Excavation in trenches in hard dense soil n.exc 1.5 mtr wide & n.exc 1.5mtr in depth and n. exc. 10sqm on plan for laying pipe in trenches and getting out complete all as specified and directed.

Supply & lay XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 16 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc including taking down old cable complete all as specified and directed.

S&F in repair Bronze gate valve class-1 for 50mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778: 1984, complete all as specified and directed.

S&F GI tubing medium grade, ISI Marked conforming to IS:1239 Part-I 2004, 50mm bore with and including all fittings such as bends, elbows,tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing complete all as specified and directed.

M & L for disconnecting electrical connection & outlet pipe connection, taking out submersible pump and motor of any capacity from the tube well/borewell lowered at the depth of 100m and above from the ground level complete with HDPE pipe and submersible cable, transport to authorized workshop for repair/servicing, brought back to existing location and lowering the same pump after repairing / servicing along with HDPE pipe and electric cable including fixing of cable to pipe with PVC strip, replacement of clamps and mild steel bolts, nut and washers with stainless still nut and bolt, casing capping bell cap etc, reconnecting electrical & delivery pipe line complete all as specified and directed. Note:- (i) Repairing / Servicing of submersible pump & motor shall be measured & paid separately. (ii) Cable & HDPE pipe if found unserviceable and steel shaft as per existing dia incl metaling of pump shaft, grinding & polishing shall be measured and paid separately.

M & L for cleaning / servicing of existing borewells up to pipe dia 50 mm by using boring machine up to depth of of existing minimum 100 RM including next 30mtr depth new drilling in exsiting borewell for better yield of water complete all as specified and directed.

Supply and Fix in repair HDPE pipe with material grade PE 50, PN 10.0 confirming to IS-4984 ISI Marked for working pressure 10Kg/sqcm including taking out old unsv damaged pipe complete all as specified and directed.

Outer dia 50mm with minimum wall thickness 6.7mm

Supply and Fix in repair submersible pump cable, PVC insulated, PVC sheathed, multi stranded copper conductor cable 1100 volts grade and connecting complete including taking out old unsv damaged cable of following sizes:-

6sqmm 3 core

S&F Sheet metal enclosure SPN for DB's when MCB's to be used with 200 amps bus bar double door 4 way complete all as specified and directed.

S&F MCB TPN 63Amp complete all as specified and directed.

Supply and fix DOL starter three phase 415v along with short circuit protection connected accessories suitable with for 3HP motor complete all as specified and directed.

Supply and install submercible multistage HP motor with pump of Capacity 3HP three phase, 415 volt, 50 Hz including pump pipe size 50mm 48Mtr head range 830L/Min to 300L/min complete including nut bolt and washers complete all as specified and directed. Make- Havells Model No HCT4W12D30S or equivalant.

Please Enable Macros to View BoQ information