Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 LAccepted-AOC | ₹7.2 L | L1 | Accepted-AOC Lowest valid tender |
| 2 | L2₹7.9 LRejected-AOC | ₹7.9 L | L2 | Rejected-AOC Second lowest valid tender |
| Sl No | Description | Qty | Unit | SOUBHAGYA ENGINEERING COMPANY L1 | ANOOP KUMAR P L2 |
|---|---|---|---|---|---|
| 1.00DG set | |||||
| 1.00 | OD130949/2024-2025:Supply ,loading, conveyance ,unloading and installing of 15 kVA Diesel Generator set completed with integral acoustic enclosure as per existing CPCB IV norms and as per technical details given below 1. Engine a) Make of Engine - Cummins/ Kirlosker/Volvo/Catterpiller b) Type of Engine - Diesel Engine c) No. of Cylinders- 4. d) Method of Cooling ; Liquid cooled with radiator. e) Aspiration -Turbo charged, charge air cooled. f) Design - Suitable for generating set operating. g) Output- As per manufactures standards. 2. Standard accessories with Diesel Engine. a) Fly wheel to suit flexible coupling b) Close Coupling c) Air cleaner d) Radiator with fan provided with fan guard. e) Fuel Pump f) Mechanical governor g) Fuel filter h) Exhaust silencer i) Exhaust Muffler j) Lubricating oil filter. k) Battery Charger/Generator 3. Engine Instrument Panel with the following items a) Starting switch with key or button. b) Lubricating oil pressure gauge. c) Water temperature gauge. d) RPM Indicator with hour meter. e) Battery charging Ammeter. 4. Safety Controls for Engine. a) Trip for low lubricating oil pressure. b) Trip for high water temperature. 5.Fuel pipe: Oil resistance flexible hoses of 20mm dia or nearest size MS pipe as per manufacturers standard, 6 Brush less Alternator a) Make - Stamford/Kirlosker/crompton b) Type - Self exited and self-regulated, brush less c) Capacity ; 15 KVA/ 12 K W @ 0.8PF d) System of Voltage - 3 phase, 415 V, 4 wire system. e) Speed - 1500 rpm f) Voltage regulation band - +/-2.5% of rated voltage g) Frequency - 50 Hz h) Insulation - Class -F/H .The Alternator should confirm to IS 4722. Operation and service manual, spares and tools shall be provided. . 7.Fuel Tank Suitable size built in type integrated with the acoustic enclosure. Fuel connection shall be done as per standards.7. Battery. Suitable size built in type integrated battery with leads and terminals of appropriate AH capacity as per Manufactures requirement. 8. Automatic Battery charger. Push button switch for ON/OFF - 1 set. Metallic DNB - 1No Solid state phase indication lamp for supply ON/OFF with HRC protection Supply of HSD for load test run, The standard Electric control panel integrated with acoustic enclosure comprising of the following. a) 63-80A,30/35KA,4Pole MCCB having adjustable setting, b) Digital Multi function meter with accuracy class 1 to read parameters such as KW, KVA, PF, voltage, Current Frequency, Running hour counter etc: c) Digital type single function KWH meter with accuracy class 1, d) LED type phase indication Lamp for indicating the presence of supply on all phases,10.Exhaust Piping Exhaust Piping shall be vent to the top of the nearest tallest building if required . If the pipe cannot be clamped/fixed to the building or any other structure of permanent nature necessary fabricated structures using channel section or angle iron sections of adequate mechanical strength, duly painted with 2 coats of Heat retardant aluminium paint shall be provided for the support of the exhaust pipe. (Additional piping will be measured excluding the standard length of pipe supplied by the manufacturer.) Load test as per standard shall be conducted at OEM unit/factory or test facility and shall be witnessed by department Engineer OEM/ contractor representative. The DG set shall be tested as per relevant IS standards. Block load testing shall also be conducted. The load required for testing shall be made available by the selected agency/ Contractor at his own expense. Warranty : The DG set shall be guaranteed for 36 months from the date of commissioning from any defects in manufacturing should be carried out by the contractor (charges included). Routine maintenance charges which includes changing filters, engine oil etc. and any of the spears/ components which are found to be defective during this period shall be replaced immediately free of cost by the selected Agency/ Contractor (Additional charges included) | 1 | each | 5,44,654 ₹5,44,654 | 5,90,000 ₹5,90,000 |
| 1.00 | OD39336/2023-2024:Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required. -63A, 415 V, 50 Hz, AC 23 A duty, 4 pole on-load change over switch with indicators for kseb and DG supply | 1 | each | 5,679 ₹5,679 | 6,500 ₹6,500 |
| 1.00 | 14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. | 2 | cum | 417 ₹834 | 500 ₹1,000 |
| 1.00 | 14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. | 2 | cum | 9,460 ₹18,920 | 10,500 ₹21,000 |
| 1.00 | 14.11:Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels. | 2 | cum | 8,434 ₹16,868 | 9,500 ₹19,000 |
| 1.01 | OD39337/2023-2024:Providing 15mm thick cement plaster of mix 1:4 (1 cement: 4 fine sand) at all levels | 2 | sqm | 348 ₹696 | 450 ₹900 |
| 1.01 | OD55982/2023-2024:Supply and providing cladding for the 63 mm dia/nearest size exhaust pipe of the DG set by warpping 50mm mineral wool around the pipe,fixing it firmly with in the pipe using chicken mesh, applying over all coating to the system using 0.40mm thick aluminium sheet and make it air tight to ensure sound and thermal proof to the system | 10 | metre | 905 ₹9,050 | 1,500 ₹15,000 |
| 1.01 | OD39338/2023-2024:supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. as required(in ordinary soil).
3.15mm copper conductor(10 SWG) | 45 | metre | 133 ₹5,985 | 150 ₹6,750 |
| 1.01 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board | 15 | kg | 170 ₹2,550 | 200 ₹3,000 |
Tender Value
Refer Docs
EMD Value
₹18,052
Closing Date
27 Dec 2025, 6:00 pmClosed
Assistant Executive Engineer
O/o the Assistant Executive Engineer, PWD Electrical Sub Division, Kozhikode
GENERAL-Sub-Jail Vatakara ,Kozhikode- Providing DG Set and allied electrical works.- General Electrical Work
2025_PWD_817870_2
PWD/BLDG/TR/9694/2023
Open Tender
Electrical Works
180 days
Kozhikode
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,595
₹18,052
24 Jan 2026
20 Dec 2025
30 Dec 2025
20 Dec 2025
27 Dec 2025
20 Dec 2025
Amount
DG set
OD39336/2023-2024:Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required. -63A, 415 V, 50 Hz, AC 23 A duty, 4 pole on-load change over switch with indicators for kseb and DG supply
14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.
14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.
14.11:Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.
OD39337/2023-2024:Providing 15mm thick cement plaster of mix 1:4 (1 cement: 4 fine sand) at all levels
OD55982/2023-2024:Supply and providing cladding for the 63 mm dia/nearest size exhaust pipe of the DG set by warpping 50mm mineral wool around the pipe,fixing it firmly with in the pipe using chicken mesh, applying over all coating to the system using 0.40mm thick aluminium sheet and make it air tight to ensure sound and thermal proof to the system
OD39338/2023-2024:supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. as required(in ordinary soil). 3.15mm copper conductor(10 SWG)
90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board
90.11.1.14:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)
2.10.4:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole
2.13.2:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
90.12.5.41:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm
90.12.7.41:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp
90.12.7.40:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp
90.12.7.2:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp
90.12.5.2:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6 sq mm
90.12.1.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 10 sq mm
9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)
9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
9.1.33:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size
5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
OD39339/2023-2024:Providing and fixing 25 mm* 3 mm G I strip earth lead from the test joint to the earth plate
OD39340/2023-2024:Providing and fixing 2 * 25 mm * 3mm G I strip test joint for earthing system
90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)
90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)
OD39341/2023-2024:Supply and providing 25x6mm brass nut and bolt etc. as required
90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
OD39342/2023-2024:Supply and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for cables 10 sq mm with 20mm wide x 1.20 mm thick clip as required.
OD39343/2023-2024:Supply and fixing of SMPS based Battery charger suitable for 12/24 V DC, 0.5 to 10A capacity and giving connection etc. as required.
OD39344/2023-2024:Supply of high speed diesel.
1.28.2:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module
1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
OD39345/2023-2024: Supply and providing 25x6mm brass nut and bolt etc. as required.
OD39346/2023-2024:Supply and providing 4.5kg Dry Chemical powder Type fire extinguisher with hose and clamps including fixing it to wall as required.
OD55857/2023-2024:Supply and providing and fixing 63A TPN disconnector fuse switch unit in sheet steel enclosure with ISI marked HRC fuses on wall/angle iron frame including drilling holes in frame, making connections, etc. as required.
OD55856/2023-2024:Supply & installation of dust and vermin proof, 3 Phase Syntex Meter Board( GS-MB-6535) and to fix KSEB LT meters, TVM with CTs/DHD and fuse cut out etc as required including fixing it on wall, making good the damages colour washing etc. as required. 650*350*250mm
OD55859/2023-2024:Supplying and fixing 63A, HRC Fuse with HRC Fuse link with connections, in existing meter board
OD55858/2023-2024:Supplying and fixing 63 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board
1.21.4:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm
OD55872/2023-2024:Supply and providing suitable Iron Hook grouted on wall for binding the service wire as required.
ANOOP KUMAR P (BID ID -2448705)
Bidder Name
SOUBHAGYA ENGINEERING COMPANY
ANOOP KUMAR P
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1379369.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.42 MB
Tendernotice_2.pdf
PDF • 0.37 MB
Tendernotice_3.pdf
PDF • 0.29 MB
Tendernotice_4.pdf
PDF • 0.47 MB
BOQ_1379369.xls
BOQ • 0.33 MB
nit.pdf
Tender Documents • 0.02 MB
sbd.pdf
Tender Documents • 1.65 MB
materiallist.pdf
Tender Documents • 0.28 MB
Download all tender documents and submit your bid