WBPWD/eNIQ01/EE/NCD/2019-20

Amount

HYDRANT SYSTEM ABOVE GROUND PIPING: Supply, erection, jointing, testing and commissioning of M.S. Pipes (conforming IS: 1239, Part-I, Medium Grade) the pipes being fixed on the walls or suspended from the ceiling with angle iron supports complete with fittings (conforming to IS: 1239,) bends, tees, flanges and all necessary accessories complete with 2 coats of P.O. Red Synthetic enamel paint followed by 2 coats of Primer. Flanged / Screwed / Welded type of joint. (Make: Tata/Jindal) 150 NB

Supply, erection, testing & commissioning of ISI Marked STAINLESS STEEL LANDING /Hydrant VALVE with all accessories. (Make: AnDex/Sha Engineering / GEI / Fire Shield)

Supply, erection, testing & commissioning of ISI Marked STAINLESS STEEL 3 way Fire Brigade Inlet with all accessories. (Make:Andex/ Sha Engg / GEI / Fire Shield)

Supply, fixing, testing & commissioning of ISI MARKED 15 M long x 63 Dia. RRL Hose. The Hose shall be reinforced rubber lined, woven jacketed type conforming to IS: 636 Type A. With STAINLESS STEEL couplings. The general design and construction of instantaneous couplings, shall comply with IS: 903 (latest revision) (Make:Andex/ Newage/ Fire Shield/ BRG)

Supply, fixing, testing & commissioning of ISI MARKED STAINLESS STEEL WATER BRANCH PIPE WITH NOZZLE. The general design and construction of branch pipes and nozzles shall comply with IS: 903 (latest revision). Nozzles shall be constructed of Stainless Steel. The nozzle sizes shall be of not less than 16 mm in diameter, nor more than 25 mm in diameter. Branch pipes shall be constructed of Stainless Steel and have rings at both the ends. (Make: Andex/Sha Engg. / Fire Shield / GEI)

Supply, erection, testing & commissioning of 25 NB AIR RELEASE VALVE on riser. The Air Release valves shall be of direct spring loaded pop type and shall have a tight, positive and precision closing.

Fabrication, supply erection & commissioning of wall mounted type M.S.HOSE BOX (INTERNAL). The hose box shall be capable to accommodate 2 Nos. 15 M long hose pipe fitted with quick coupling ends, branch pipes, nozzles etc. will be kept in a hose box, which will be located near point of use. Cabinet shall be fabricated from 16 SWG MS sheet with necessary reinforced strip. Cabinet shall have glass (2 mm. Thick) fronted hinged door with handle, hammer with chain & key. Size : 750 x 600 x 250 mm

Supply, erection, testing & commissioning of ISI MARKED GATE VALVE conforming to IS: 14846. PN-1.6 with companion flanges, gaskets & nuts and bolts. Valves shall be as per Tender Specification. (Make: H Sarkar / Koley / Kartar) 150 NB

Supply, erection, jointing, testing and commissioning of ISI marked Butter fly Valve as per IS: 13095 with companion Flange, nut & bolts etc. (Make: H Sarkar / Koley / Kartar) 150 NB

Supply, erection, testing & commissioning of NON RETURN VALVE as per IS:5312 with companion flanges, gaskets & nuts and bolts. Valves shall be as per Tender Specification. (Make: Katar/Koley/H Sarkar) 150 NB

Supply, erection, testing & commissioning of Steel structure for Pipe Support.

Supply and fixing of swinging HOSE REEL & 20 mm dia. Bore Thermoplast Pipe of length 30 mtrs. fitted with 6.35 mm nozzle. The hose reel shall be recessed swinging type, as per IS: 884 with reel drum shall be provided with coupling as per detail code of practice, inclusive of connection with hydrant riser pipe.

Supply & Fixing of GM Ball Valve 25 mm as per IS:778 with all fixture & fittings.

Supply, erection, testing & commissioning of Horizontal/Vertical centrifugal type ENGINE DRIVEN FIRE PUMP of 2900 RPM fire water pumping set suitable for automatic operation , Total Head (MWC) 70 & Discharge Capacity 2850 LPM. 1. Suitable rated Motor, 2. Common base plate, 3. Coupling, 4. Coupling guard, 5. Anti- vibration mounting 6. Nuts, bolts, fittings etc. (as required to complete in all respect)

Supply, erection, testing & commissioning of Foot Valve with Strainer with companion flanges, gaskets & nuts and bolts. 200 NB

Supply, erection, testing and commissioning of PRESSURE SWITCH for Pumping System. INDFOSS makes, suitable to high-pressure line. To be mounted on water line for auto start – stop of fire pump as per tender specification.

Supply, erection, testing and commissioning of PRESSURE GAUGE as per tender specification. The scale shall be in metric units. Accuracy shall be 1.0 percent of full-scale range or better conforming to IS: 3624-1979.

Supply, erection, testing and commissioning of 15 NB BALL VALVE. As per IS:778 complete with all accessories.

Supply, erection, testing and commissioning of COMPOSITE DG PANEL for AUTO operation of Pumps installed in Pump House.

Supply, erection, testing and commissioning of CONTROL CABLE from various instruments to composite panel. 12 C x 1.5 mm2

SPRINKLER SYSTEM: Supply, erection, jointing, testing and commissioning of M.S Pipes (conforming IS: 1239, part-I, Medium Grade) the pipes being fixed on the walls or suspended from the ceiling with angle iron supports complete with fittings (conforming to IS: 1239,) bends, tees, flanges and all necessary accessories complete with 2 coats of P.O. Red Synthetic enamel paint followed by 2 coats of Primer. Welded/Flanged/Screwed type of joint.(Make: Tata / Jindal) 150 NB

Supply, erection, testing & commissioning of UL Listed STANDARD RESPONSE TYPE SPRINKLER head of 68˚C rating. Finish of the sprinkler shall be either standard Brass or Stain chrome or nickel or polished chrome. PENDENT Sprinkler.

Supply and fixing of hydraulically operated Sprinkler Control Valve, with water motor gong bell and trims as required, pressure gauges, drain valves, ball valves check valves, strainers etc. complete. Alarm valve shall be UL Listed / FM approved. 150 NB

Supply, erection, testing & commissioning of Steel structure for Pipe Support for Sprinkler Pipe Lines.

FIRE EXTINCT

NILEX FIRE PROTECTION SYSTEMS

ROWTARA LABOUR CONTRACT AND CONSTRUCTION CO-OPERATIVE SOCIETY LTD.