REPAIR AND MAINT OF OTM / MD PASSAGES AND OTHER MISCWORK IN ZONE II AND III AT LANSDOWNE.

Amount

Demolition of unreinforced cement concrete in floors and pavings n. exc 15 cm thickness below or above ground level, complete all as specified and directed.

Material and labour for 75 mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M & L cement concrete 100mm thick type B-2, 1:2:4 (40mm graded aggregate) as in path/hardstanding complete all as specified and directed.

Spike rolling to surfaces or making impressions of expanded metal, while the concrete is green all as specified & dir.

M & L for Machine pressed precast cement concrete Interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thick M-35 grade (ISI Marked) with gray cement and pigment finished with coloured rubber finish on top finished complete all as specified and directed.

M & L for Machine pressed precast cement concrete Interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thick M-40 grade (ISI Marked) with gray cement and pigment finished with coloured rubber finish on top finished complete all as specified and directed.

M & L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortor 1:4 complete all as specified and directed.

Demolition of brick masonry built in cement mortar incl quoins arches pillars etc complete all as specified and dir.

M & L for Rendering 15mm thick on brick walling in CM (1:4), finished even and smooth w/o using extra cement complete all as specified and directed.

M&L preparing newly plastered surfaces ,and applying 2 coats of cement base paint on walls complete all as specified and directed.

M & L 25mm thick sand filling under paver block incl watering & consolidation complete all as specified & dir.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M & L for chequered tiles 30cm x 30cm x25 mm thick, rubber finished, (ISI Makred) set jointed and pointed in neat and cement slurry in floors with grey cement and pigment including screed bed 20mm thick in CM 1:6 complete all as specified and directed.

Dismissing of plain or corrugated steel sheeting any gauge thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

Dismantling of structural steelwork, including doors gates, but excluding framed truss complete all as specified and directed.

S&F Rolled sections as in main and cross beams hip and Jack Rafters, Perlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified & directed.

S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified & directed.

M&L preparation of new or previously untreated surfaces of any description over 10 cm in width or girth not otherwise described, and applying two codes of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

PIONEER REFRIGERATION AND ELECTRICALS

PRAMOD KUMAR

SHREE RAM BUILD TECH

Vinayak Trading House

M/S GARG CONSTRUCTION