WBPWD/EE/BNWD/NIT24e/2025-26/2

Labour for taking out steel door and window frame for repairs and re-fixing the same (or replacement by new one) including mending good damages (excluding the cost of repair of damages) and applying a protective coat of paint. Upto one sq.m.area of frame.

Taking out M.S. or W.I. Grills from wooden frame including cutting lugs from masonry wall and refitting the same and mending good damages after repairs. (Excluding the cost of necessary repair of damages) or doing any other necessary works.

(A) Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals) (i) Sal : Malayasian

(B) Dressed wood work in post , plate , battens . etc. fitted & fixed complte (excluding the cost of bolts only, but including the cost of nails, scrw etc.) (i) Sal : Malayasian 1st Floor

Supplying, fitting and fixing boiling water resistant ply conforming to IS: 3031989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-inCharge.[excluding the cost of supporting frame work and teak wood batten/Lipping] In 1st Floor 9 mm thick Ply

In 2nd Floor 9 mm thick Ply

In 1st Floor 4 mm thick Ply

In 2nd Floor 4 mm thick Ply

In Ground Floor 19 mm thick Ply

Supplying, fittingand fixing 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than1200mmX190mm (with unilin/tongue-groove locking arrangement) having 0.2mm thk top abrasive layer over adecorative layer followed by a High-density fibre board (HDF)havingdensity>850kg/m3 substrate core overara sin saturated backing layer and installing through unilin or tongue-groovesystem (having locking strength not less than 1000kg/m)overa 2mm thkunderlayerpolyurethenefoamon polythene sheet 250 micron,overa smooth, flat,hardsub floor free from moisture (<8%),greaseetc. complete in all respect with requisite accessories like end profile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer incharge. Cost ofLaminateFloor Accessories only (Skirting ,Endedge, T-moulding, Reducer) shall have to be added separately, wherever required. (This work should not be executed without specific permission of Superintending Engineer). ln Ground FIoor :Category: Normal Footfall; Class 23;Abrasion resistance:-AC3 Thk on Swelling:- < 18% ;Impact resistance:- IC 1

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1.5mm Ground floor

1st Floor

Scantling upto 50mm wide and 12mm thick (chamfering or rounding) for ceiling/partion battens including fitting, fixing in position with washers, coach screws etc. complete.: (a) Ordinary teak

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white e) Casement window ( 40 mm Depth series) i) Outer frame.

ii) Mullion.

iii) Shutter.

iv) Glazing clip.

v) Cleat angle. (Non-annodized)

g) Fixed glazing. i) Top, bottom and side member.

ii) Mullion.

iii) Glazing clip.

Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge. ii) For openable / Casement windows a) EPDM / weather gasket for outer frame and mullion.

(C) Supplying Heavy Duty Aluminium Handle (EBCO Type) (Natural White)

Supplying stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White) (a) 250 mm long

(E) Supplying 250mm long Heavy Type Aluminium window Peg Stay (Natural White)

Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete. Upto 5 mm depth and 5 mm width (b) Extra for each additional floor

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. i) 4mm thick clear glass.

vii) 8mm thick clear glass.

Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units: (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketin...... The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. iii ) Openable / Casement window.

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in : Gr Floor (a) 35mm thick shutters (single leaf)

1st Floor (a) 35mm thick shutters (single leaf)

Supplying, fitting & fixing M.S. clamp for fixing door and window frames, end bifurcated including cutting brick work, fixing in cement Conc.with stone chips (4:2:1) fitted and fixed as per direction and mending all damages complete. (a) 40 mm X 6 mm. 250 mm length

Vision aperture (round or retangular in shape) with 7.4kg. Per sq.m./ 3mm thick glass pane with wooden beads. (Cost of glass panes and wooden beads will be paid separately).

Double acting Iron Spring Hinges of approved quality fitted and fixed complete:- (c) 150mm size

Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge. (d) 450 mm long

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (x) 300mm long x 12mm dia. bolt.

Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of approved quality of reputed brand as per direction of Eingineer-inCharge fitted and fixed complete including all incidental charges

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. Add Extra 30% for Oxidised Fittings) (viii) 100mm. x 75mm. x 3.50mm.

Anodised Aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to IS. Specification (i.S. 2681 / 66) fitted and fixed complete. (iv) 300 mm X 19 mm dia bolt

Door stopper.(Brass)

(b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.

ii) Godrej Hydraulic door closer fitted and fixed complete. (a) Heavy type

(b)Priming one coat to steel or metal surface with synthetic enamel / oil bound primer of approved quality including smoothening surface by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. On the surface if necessary. Steel or Metal surface With Super Gloss (hi gloss) Two coats ( with any shade except white)

TOTAL:

ADD : GST - 18% (SGST = 9% & CGST = 9%)

ADD : WEST BENGAL LABOUR WELFARE CESS = 1%