RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN BUILDING

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

1 ceiling as per pipe erected, with necessary Lamp holder/ceiling rose 73.00 Pt. 485.81

/ H.D.Connector as directed. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete

Cat. III (MAKE : ANCHOR , LEGRAND, SCHIENDER )

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

2 ceiling as per pipe erected, with necessary Lamp holder/ceiling rose 317.00 Pt. 410.06

/ H.D.Connector as directed. (j) in existing pipe erected concealed

in wall/ceiling complete Cat. III (MAKE : ANCHOR

LEGRAND, SCHIENDER )

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

3 ceiling as per pipe erected, with necessary Lamp holder/ceiling rose 318.00 Pt. 449.45

/ H.D.Connector as directed. (a) with medium class Rigid PVC

pipe and accessories erected flushed on wall/ceiling complete

Cat. III (MAKE : ANCHOR , LEGRAND, SCHIENDER )

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white

4 front plate modules erected on / in wall / ceiling as per pipe erected. 28.00 Pt. 674.68

with necessary ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat. III (MAKE : ANCHOR

LEGRAND, SCHIENDER )

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

5 following type of accessories.[I] For 6A Plug and 6 a switch with 293.00 Pt. 510.05

2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

board.(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III (MAKE

:ANCHOR ,LEGRAND,SCHIENDER)

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

6 following type of accessories.[II] For 16A Plug and 16 amp 79.00 Pt. 745.38

switch with 2-2.5 sq.mm Cu. Wire from mcb db board.(f) with

medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat. III (MAKE :ANCHOR

,LEGRAND,SCHIENDER)

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.[III] For 16A Plug and 16 amp

7 switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) 114.00 Pt. 871.63

earthing wire from mcb d b board.(f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III (MAKE : ANCHOR , LEGRAND,

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules erected

8 with necessary connections as per site situation directed by Engineer 85.00 Ea 25.25

In charge. (7) Blank Plate Single Cat.III (MAKE :ANCHOR

,LEGRAND,SCHIENDER)

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /metallic/white

9 front plate modules erected on / in wall / ceiling with following type 50.00 Pt. 257.55

accessories Cat. III (MAKE :ANCHOR

,LEGRAND,SCHIENDER)

Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive

10 solution & Clamps with following dia of pipes, in approved manner 2450.00 Mtr 24.24

as directed.(a)20 mm (MAKE : NIHIR , VRAJ, POLYCAB)

Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive

11 solution & Clamps with following dia of pipes, in approved manner 2000.00 Mtr 33.33

as directed.(b) 25 mm (MAKE : NIHIR , VRAJ, POLYCAB)

Supplying under floor pregalvanised corrosion proof rectangular

sheet steel cable trunking of 1.6 mm thick having with stand point

load up to 1.33 Ton & free from seepage of concrete of screed water

with all accessories,Junction Box,Joints as required and demanded

by engineer-incharge and laying/erecting as per OEM guidelines

and as per instruction of engineer incharge having following size of

dimensions and No of compartments (W x D x T) Cat-III [13]

300mm x 38mm x 1.6 mm with Three Compartments (FOR

ELV,POWER IN FLOORING)

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Providing and fixing approved make Perforated C type cable tray.

Made from pre- galvanized sheet steel. The cable tray should be

bended as per IS 2062/1079 . with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like nut - bolt and

13 washers etc. erected on existing support as per Specification and as 550.00 Mtr 471.67

per instruction of engineer in charge..(5) 300 X 50 X 1.5 mm Thick

(FOR ELV,ELE,HVAC,FIRE PLACED IN DUCT)

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white front

14 plate,modules erected with necessary connections as directed. 1 no. 539.00 Ea. 1133.22

6A/16A universal plug-switch combined.3 nos. 6A Switch 3 nos. 6A

5 pin Plug .For Modular Type Accessories Cat.III (MAKE :

ANCHOR , LEGRAND, SCHIENDER )

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %,CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED driver efficiency > 85 %( fitting

15 required LM-79 & LM-80 Certificates)(NOTE: Below description 15.00 Ea. 312.09

have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the

ranges shown.) (H) Mirror Light 9 Watts, wall mounted

minimum 1 feet long (MAKE: PHILLIPS, CROMPTON,

HAVELLS BAJAJ. )

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to 270V,Power Factor

more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description

16 have shown ranges of Wattage capacity of LED fittings.The 55.00 Ea. 758.51

Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting

clips complete.IP20 (iv) 22-24 watts, Surge-2 KVCat-lll (MAKE:

PHILLIPS, CROMPTON, HAVELLS BAJAJ. )

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

17 Below description have shown ranges of Wattage capacity of LED 10.00 Ea. 10818.11

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (B) Flood Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection. (vii) above 200 to 250 watts

Cat-lll (MAKE: PHILLIPS, CROMPTON, BAJAJ, HAVELLS)

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to 270V,Power Factor

more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description

18 have shown ranges of Wattage capacity of LED fittings.The 13.00 Ea. 589.84

Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting

clips complete.IP20 (iii) 16-20 watts, Surge-2 KV Cat-lll

(MAKE: PHILLIPS, CROMPTON, BAJAJ, HAVELLS)

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to 270V,Power Factor

more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description

19 have shown ranges of Wattage capacity of LED fittings.The 5.00 Ea. 220.18

Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting

clips complete.IP20 (i) 5-9 watts,Surge-2 KVCat-lll (MAKE:

PHILLIPS, CROMPTON, BAJAJ, HAVELLS)

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%,CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 %( fitting required LM-79 & LM-80

20 Certificates)(NOTE: Below description have shown ranges of 587.00 Ea. 373.70

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (A) Tube Light

with integral driver KV (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-lll (MAKE: PHILLIPS, CROMPTON,

BAJAJ, HAVELLS)

Supplying and erecting approved make Bracket fan of 230 volt,

A.C. 50 Cy/s., 400/450 mm sweep complete erected on wall or with

21 lead Cores and connections complete.Cat.II (MAKE: USHA, 4.00 Ea. 2105.85

BAJAJ, CROMPTON)

Supplying & erecting approved make low noise decorative exhaust

fan having square frame ABS body with inbuilt lowers & square

frame. 250mm with 1350 RPM Cat.II (MAKE: USHA, BAJAJ,

Supplying & erecting single phase approved make industrial exhaust

fan suitable for medium duty ring mounted low noise operation

23 suitable for medium duty having following dia size and maximum 1.00 Ea. 3937.99

speed in RPM [E] 450 mm dia 1400 RPM Cat.II (MAKE: USHA,

BAJAJ, CROMPTON)

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Supply, Installation, Testing and Commissioning of suitable sweep,

BEE 5 Star rated, Ceiling fan with Brush Less Direct Current

(BLDC) permanent ferrite magnet Motor, class of insulation: B,

Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with

earthing provision, copper winding, Power factor not < 0.9, Service

Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM,

350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with

remote unit for Speed Control and all remaining accessories

24 including safety pin, nut bolts, washers, temperature rise = 75 1.00 Ea. 2799.72

degree C (Max.), suitable for 140 to 285 Voltage and rectifier

circuit with surge, over current and overload protection , 50 Hz,

Single phase AC Supply, earthing etc. Complete as required.[ Make

shall be approved by Engineer in Charge] (A)900 mm sweep (36")

(MAKE: USHA, BAJAJ, CROMPTON)

Supply, Installation, Testing and Commissioning of suitable sweep,

BEE 5 Star rated, Ceiling fan with Brush Less Direct Current

(BLDC) permanent ferrite magnet Motor, class of insulation: B,

Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with

earthing provision, copper winding, Power factor not < 0.9, Service

Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM,

350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with

remote unit for Speed Control and all remaining accessories

25 including safety pin, nut bolts, washers, temperature rise = 75 23.00 Ea. 2885.57

degree C (Max.), suitable for 140 to 285 Voltage and rectifier

circuit with surge, over current and overload protection , 50 Hz,

Single phase AC Supply, earthing etc. Complete as required.[ Make

shall be approved by Engineer in Charge] (B) 1200 mm Sweep

(48") (MAKE: USHA, BAJAJ, CROMPTON)

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and pierced

26 through a 16 Gauge M.S. box / Heavy Duty PVC box complete 24.00 Ea. 108.07

erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

28 M.S. Pipe down rod erected duly painted for fan complete with 24.00 Mtr. 108.07

proper insulation without leakage and earthing.

Providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

29 capacity 10 KA to be erected in existing box. confirming to IS 900.00 Ea. 112.11

8828/1996 with ISI Mark Cat.III (MAKE: L&T, C&S,

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all

30 advance feature & do not incorporate any electronic component. for 90.00 Ea. 2235.13

following Max. rating erected as directed (ii) 40 Amps.DP Cat.

III (MAKE: L&T, C&S, LEGRAND)

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

31 8828 in existing box having following capacity (B) 40 Amp. 62.00 Ea. 295.93

Cat.III (MAKE: L&T, C&S, LEGRAND)

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

32 confirms to IS :8828 in existing box having following capacity (c)63 62.00 Ea. 737.30

Amp Cat.III (MAKE: L&T, C&S, LEGRAND)

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should

be used of same company of MCB to be used) suitable for (B) three

phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (iv)12 way

(MAKE: L&T, C&S, LEGRAND)

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s.

34 with all internal connections, spreader tinned copper & complete 38.00 Ea. 6173.12

erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Cat III (MAKE: L&T, C&S, LEGRAND)

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. and above

at 415 V . having normal current rating 250A. with variable

thermal & magnetic release suitable to work on A.C.supply 50 c/s.

35 with all internal connections, spreader tinned copper & complete 11.00 Ea. 20946.39

erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Cat III (MAKE: L&T, C&S, SIEMENS)

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

providing and erecting Approved make standard manually operated

fixed type 4 Pole Air circuit breaker. Having following kA

breaking capacity with ICU=ICS=ICW (1 sec),Vsr=690 v, Ui=1kv

with following type of relay and accessories. (2) with

microprocessor Release with over load, short circuit, earth fault

36 protection (L.S.I.G.) and metering display in modular design 1.00 Ea. 88993.12

with LED display and Test Trip button facility, CTs and

auxiliary contacts, of following current ratings. (B) 1000Amp

50 kA Cat III (MAKE: L&T, C&S, SIEMENS)

Providing and erecting Approved make Earth fault Relay suitable to

mount with inter connection suitable to following size of moulded

case circuit breaker having CT ratio & MCCB rating as following

37 along with shunt trip 220V AC. with all internal connections & 2.00 Ea. 4983.34

complete erected in existing M.S.housing.. (2) 125 A -200 A , CT

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated outdoor type double door cubical panel

board necessary IP-54 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire /

copper-aluminium strips, rubber grommets, rib, bakelite control

38 fuses/MCB for measuring instruments, earth bus & earth bolts, 15.00 Sq Mtr 17954.77

foundation flange - bolts-base Plates, sufficient nos. of hinged

doors, handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted with

epoxy powder coating.(The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper Aluminium strips,

meters, Fuses etc. The dimension shall be measured excluding base

beams) The panel shall be supplied with following approved

manufacturers with following size. (C) The standard companies

switch gear shall be used and only manufacturers at CPRI approved

factory as per IEC 61439 for beneficial use. (i) with 350mm depth

(C) The standard companies switch gear shall be used and only

39 manufacturers as per IEC 61439 for beneficial use. (iv) with 6.00 Sq Mtr 49517.27

Providing and erecting following additional parts for panel

mounting MCCBs (A)Extended operating rotary handle with

40 pad lock with three position trip,off,on suitable for 25A to 250 A 49.00 Ea. 873.65

panel mounting cat-III

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Supplying and erecting triple pole & neutral 440V/ 500V panel

mounting Aluminium Busbars with four equal Nos. of bus having

current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for

41 phase sequence of following current carrying capacity, erected with 12.00 Rn.Mtr 1469.55

necessary bus bar supports /insulators, main cable socket to each

busbar,erected in existing cubical panel with necessary connections.

(C) Suitable for 300 Amp. Capacity

Supplying and erecting triple pole & neutral 440V/ 500V panel

mounting Aluminium Busbars with four equal Nos. of bus having

current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for

42 phase sequence of following current carrying capacity, erected with 12.00 Rn.Mtr 7957.79

necessary bus bar supports /insulators, main cable socket to each

busbar,erected in existing cubical panel with necessary connections.

(G) Suitable for 1200 Amp.capacity

Providing and erecting multifunctional meter suitable for

application of Power monitoring and showing measurement of

following Voltage, Frequency, Apparent energy, Apparent power,

Active and reactive energy, Active and reactive power, Average

voltage Vavg, Peak demand power PM, QM, SM, Demand power P,

Q, S, Apparent power S, S1, S2, S3, Unbalance current, Power

factor and displacement PF (signed, four quadrant), Calculated

neutral current, Active, reactive, apparent energy (signed, four

quadrant), Active power P, P1, P2, P3, Voltage U21, U32, U13, V1,

V2, V3, Phase currents, Average current Iag, Peak demand currents,

43 Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us] 15.00 Ea 14123.84

rated supply voltage 40...300 V AC 45...65 Hz, 40...300 V DC,

Network frequency 50 Hz, Type of network 3P, Display type

segments LED, Display colour Red, Messages display capacity

fields of 4 characters, Display digits 12 digit(s) - 14.2 mm in height

(MAKE: SCHNEDER, SEIMENS, SALZER )

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Design, Supplying, installing, testing of factory fabricated ready

made Three phase APFC Panel Cubical Panel fabrication should

be type tested as per IEC 61921, 61439:1&2 Capacitor Duty

Contactor for switching as per following Steps Incomer Switch of

MCCB type Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal

earth fault protection Incomer Switch of MCCB type Icu=Ics=50KA

at 400/440 Volts, with OC, SC, internal earth fault

protection,Copper tinned insulated Busbar,Cubical panel should be

indoor type with IP 43 and IK 10,Metalized polypropylene film tye3-

phase 550Volt Capacitor,De tuning Reactor for each

capacitor,Panel having Short Circuit and Overload protection,Each

44 step Capacitor having suitable MCB with Sc, OL, internal earth 1.00 Ea 718985.67

fault relay,Each stage having Stage Contactor (Capacitor load

rating),PF regulator master controller having suitable steps with

LCD display, Rs 485 Communication port, Indication LED Lamps

for main incomer and ON-OFF for each capacitor bank,MS Chanel

for Floor mounting, Cable entry as per site situation,Cooling fans for

panel (g)250KVAR

Supplying and erecting approved make online Un-interruptible

Power Supply system comprising flat cum-boost charger with IGBT

base rectifier & Inverter & sealed maintenance free SMF batteries.

The charger having operating capacity for input 160-270V AC &

inverter having output 230V,50 Hz Ac with 0.8 load power factor

with battery, over/under voltage output with over load & short

45 circuit protection equipment. The system housed in CRC sheet duly 2.00 Ea 268252.97

powder coated paint with following power backup.with MS painted

batteries stand, 10% Overload capacity for momentary load. [H}

KVA with 1Hr Backup

Providing and erecting metallic vitrified danger notice board as per

language suggested by engineer incharge for MEDIUM

VOLTAGE installation to be erected as per IS-2551.

Pole 415V change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for . (E)250A /

320A Cat-lll (MAKE: L&T , CROMPTON, SIEMENS)

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

48 Below description have shown ranges of Wattage capacity of LED 20.00 Ea. 4997.48

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection. (ii) above 48 to 60 Watts

Cat-lll (MAKE: PHILLIPS, CROMPTON, BAJAJ)

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759,

suitable suspend local wind speed with integral Junction box

consist of terminal plate of min 6mm Hylam sheet, standard

profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable termination to be erected

49 With Suitable foundation (Included) as per details given by 20.00 Ea. 14010.72

manufacturer considering site requirement.(G) 8 Mtr. Long

mm Top X 155 mm bottom dia, 3 mm thickness with

260mmX260mmX16mm base plate, 4-M20 Bolts and 600mm

long with necessary G.I. J Bolts Approx Pole weight 84 kg

Providing and erecting street light pole bracket comprising main

B Class GI pipe of 4.2 cm/require outside dia. complete with

suitable B Class G.I sleeve tubing of approx. 45cms.length

and suitable for 76.5 mm / 80mm. / require size pole top having

sufficient fasteners for fixing the brackets and having spread of

mtr. length with suitable rise as per site condition & suitable welded

stiffener reducer and nipple with check nut complete painted with

one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms..[A]

Single Arm bracket 1 Mtr

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made

from jointless M.S. Angle with cable clamps to be buried in ground

to have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported on both

side,with internal and outside looking arrangement with look and

keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite sheet.

51 Painting the Section Pillar inside and out side with three tank 1.00 Ea 3595.60

powder coated paint. section pillar roof should be without joint with

water leakage proof & tested as per IP 55 test & followed by IS

2147 of 1962 (B) 75 X 60 X 45 cm section pillar fabricated from

16 Gauge MS Sheet with angle iron legs 45 cm long made from

35 X 35 X 5 mm thick MS angle. (MAKE : TATA STEEL,

JINDAL STEEL, SAIL)

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup 1 channel

day clock with 14 memory programme, suitable to operate on 240V

+ 5%, 16A with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent ON/OFF

52 switching. Programming switches & housed in fire proof 1.00 Ea 3168.37

thermoplastic enclosure & transparent cover erected as required with

necessary connection erected as directed. (MAKE: L&T,

LEGRAND, SCHNEIDER )

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size.(A) with medium

class Rigid PVC pipe and accessories.(b) 2 wire 2.5 sq. mm

(FOR COMPUTER BOARD and SWITCH BOARD) (MAKE:

FINOLEX, R.R. CABLE, POLYCAB, KEI.)

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

54 colour for earth continuity of following size(A) with medium class 6899.00 Mtr 112.11

Rigid PVC pipe and accessories.(a) 2 wire 4 sq. mm (FOR

15/16A SS & AC) (MAKE: FINOLEX, R.R. CABLE,

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size

55 of cables (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)( For 110.00 Mtr 284.82

Floor Sub Panel and Pump Panel) (MAKE: FINOLEX,

POLYCAB, ALL CAB.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size

56 of cables (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) 185.00 Mtr 540.35

(MAKE: FINOLEX, POLYCAB, ALL CAB.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size

57 of cables (J) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 100.00 Mtr 1407.94

core)(MAKE: FINOLEX, POLYCAB, ALL CAB.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or

floor of following size of cables. (A) 4 core 10 Sq. mm (MAIN

PANEL TO LIGHTING DB , POER DB) (MAKE: FINOLEX,

POLYCAB, ALL CAB.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or

59 floor of following size of cables. (B) 4 core 16 Sq. mm (MAIN 1150.00 Mtr 987.78

PANEL TO AC DB AND COMPUTER DB) (MAKE:

FINOLEX, POLYCAB, ALL CAB.)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following

60 size of cables (C) 4 core 10 Sq. mm (Street Pole To Pole AND 300.00 Mtr 140.39

LIGHTING DB) (MAKE: FINOLEX, POLYCAB, ALL CAB.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe at road

61 crossing or floor of following size of cables. (C) 4 core 6 Sq. mm ( 100.00 Mtr 510.05

USED FOR LIFT) (MAKE: FINOLEX, POLYCAB, ALL

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

62 going tails, insulating tape etc for following size of cables. (C) 2 to 10.00 Ea. 38.38

4 core 10 Sq. mm

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC insulated

63 armoured cable complete with out going tails, insulating tape etc for 10.00 Ea. 75.75

following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC insulated

64 armoured cable complete with out going tails, insulating tape etc for 24.00 Ea. 140.39

following size of cables. (E) 3 & 1/2 core 120 Sq. mm

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC insulated

65 armoured cable complete with out going tails, insulating tape etc for 8.00 Ea. 280.78

following size of cables. (I) 3 & 1/2 core 300 Sq. mm

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

66 connected to switchgear terminals with brass/cadmium plated nut 44.00 Ea. 10.10

bolts in an approved manner. (B) 10 Sq.mm

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

67 connected to switchgear terminals with brass/cadmium plated nut 88.00 Ea. 12.12

bolts in an approved manner. (C) 16 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

68 pressure tool & connected to switchgear terminals with 5.00 Ea. 13.13

brass/cadmium plated nut bolts in an approved manner. (B)

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

69 pressure tool & connected to switchgear terminals with 10.00 Ea. 20.20

brass/cadmium plated nut bolts in an approved manner. (D) 35/50

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

70 pressure tool & connected to switchgear terminals with 24.00 Ea. 45.45

brass/cadmium plated nut bolts in an approved manner. (G)

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

71 pressure tool & connected to switchgear terminals with 8.00 Ea. 98.98

brass/cadmium plated nut bolts in an approved manner. (K)

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required.(b) One wire 1.50 sq.

mm ( FOR PANEL INTERNAL WIRING) (MAKE: FINOLEX,

R.R. CABLE, POLYCAB, KEI.)

(c) One wire 2.50 sq. mm ( FOR PANEL INTERNAL

73 WIRING) (MAKE: FINOLEX, R.R. CABLE, POLYCAB, 21.00 Mtr 27.27

(e) One wire 6.00 sq. mm ( FOR PANEL INTERNAL

74 WIRING) (MAKE: FINOLEX, R.R. CABLE, POLYCAB, 14.00 Mtr 56.56

(f) One wire 10.00 sq. mm ( FOR PANEL INTERNAL

75 WIRING) (MAKE: FINOLEX, R.R. CABLE, POLYCAB, 7.00 Mtr 91.91

Making trench in soft soil of suitable width of 90 cm deep for

laying cable or locating the fault all over the run and back filling the

76 same and making the surface as normal ground. 300.00 Mtr. 55.55

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in

77 existing trench for laying of cable. below ground / road surface for 300.00 Mtr. 62.62

enclosing cable (A)50 mm outer dia.

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200- 250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 • / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

78 content:- <2%(C) Back fill Compound :- Earthing compound should 23.00 Ea. 5760.03

be capable to retainmoisture for long time Necessary test report

must be submitted.(c) For Electrical Installation covering

Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA) i.e

independent (b)For Electrical installation up to 11 KV in normal

soil. Length of Pipe : 2.00 mtrs Back filling Compound :1 no.

JAMNAGAR MUNICIPAL CORPORATION

NAME OF WORK :- RENOVATION OF ELECTRIC WORK AT JAMNAGAR MUNICIPAL CORPORATION MAIN

Description Unit Total Amount According to

Description Unit Total Amount According to

No. Quantities Rate

Estimated Quantities

Providing and erecting required size HOT deep Galvanised iron

79 strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, 100.00 Kg 77.77

Motors etc. using proper clamp.

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Dismantling the existing light, fan, bell, , independent plug point,

81 wiring with mains of all types along with accessories etc. complete 736.00 Pt. 1.01

and handed over to dept.

Refilling the holes for dismantled point with cable with cement

mortar & finishing in an approved manner.

83 Dismantling the existing cables of all types & sizes 455.00 Mtr 6.06

Dismantling the existing underground cable without damaging it

with glands, cable end box including refilling the trench up to

84 ground level and making coils complete to be placed at different 300.00 Mtr 10.10

Re-erecting PVC armoured cable 2 to 4 core up to 50 sq.mm on wall

85 / pipe with necessary material & G.I. earth wire in an approved 2490.00 Mtr 7.07

Dismantling the existing switchgears, DB and Busbar of any size

complete with / without board or angle iron frame.

Dismantling the existing ceiling fan / exhaust fan / cabin fan /

87 bracket fan complete with accessories, G.I. down rod, frame etc. and 51.00 Ea. 9.09

making the site clear.

88 Dismantling the existing any type of indoor light fittings 736.00 Ea. 5.05

Dismantling the existing window type air conditioner of any type

89 and capacity safely without any damages and making the site clear. 1.00 Ea. 129.28

Dismantling the existing split type air conditioner of any type and

90 capacity safely without any damages and making the site clear. 2.00 Ea. 282.80

I/we We I / We am/are willing to carry out the work at ____% above / below the estimated rates:-

I/We hereby declare that I/We studied the conditions of contract, detailed technical specification Deputy Engineer

and other tender documents of this work and agree to execute the same accordingly Light Branch

Jamnagar Municipal Corporation