GENERAL-Cheramangalam Scheme -2023-24- Improvements and urgent rectification work to Sluice Shutters to 16A branch canal first reach - General Mechanical Work

Amount

Dismantling existing Shutters and Hoisting mechanism and providing new Embedded parts and seals and new piers.

OD36257/2023-2024:Taking out the mud debris and cleaning the bay, removing the plastic and bio waste and disposing at a suitable place 50m away from site

OD36251/2023-2024:Dismantling of the Canal Shutter ( Up to 2Tonne weight )/ Hoisting unit, Embedded parts, etc. of the same and stacking at a distance of 100metre including hire of machinery, labour etc. complete as directed by the departmental officer at site. (Weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80%)

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

OD36194/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD36195/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD36254/2023-2024:Supply of MS round bar including cost of conveyance charges

OD36256/2023-2024:Supply of MS BOLT and NUT up to 300mm Length including cost of conveyance.

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

OD36265/2023-2024:Fabrication and erection of Embedded parts of Canal shutters ( Up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl. officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

OD36255/2023-2024:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track, Seal seat etc. as per approved specifications, drawings and directions of deptl. officer at site including cost of all materials, labour, machinery for planing, welding, shearing, grinding etc., lead and lift, conveyance, incidental and handling etc. complete

OD36196/2023-2024:Fabrication and supply of Structural steel Canal shutters ( Up to 2tonne weight ) /Hoisting bridge / Platform and accessories etc. as per approved specifications, drawings and directions of deptl. officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

OD36197/2023-2024:Over coat painting the regulator gates and embedded parts with two coats of epoxy tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns, after cleaning the surface using high pressure water jet including cost of materials, labour, charges, cost of testing all painting materials, incidental charges, hire of T&P etc. complete as per the direction of departmental officers at site.

OD36198/2023-2024:Erection of the Canal Shutter ( Up to 2Tonne weight ) / Hoisting bridge / Platform including hand rails, ladder etc. for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance, lead and lift charges etc. complete but excluding cost of materials already supplied

OD36253/2023-2024:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE

Dismantling existing Shutters, Hoisting bridge, Demolishing Cement concrete manually, Form work and and Concreting for Canal sluice shutter from Ch:0/000km to 13/050km (4Nos Sluices).

OD36165/2023-2024:Dismantling of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting unit / Embedded parts etc. of the same and stacking at a distance of 100 meter including hire of machinery, labour etc. complete as directed by the departmental officer at the site. (Weight of the unserviceable shutters and embedded parts may be calculated as 60 % and unserviceable hoisting unit as 80%).

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Supply, Fabrication, Painting and Erection of Embedded Parts, Shutters and Hoisting mechanism for Canal sluice shutter from Ch:0/000km to 13/050km (4Nos Sluices).

OD36166/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges.

OD36167/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.

OD36168/2023-2024:Supply of MS round bar including cost of conveyance charges.

OD36169/2023-2024:Supply of BOLT and NUT up to 300mm Length including cost of conveyance. (Data for 1Qtl)

OD36170/2023-2024:Providing EN-8 screw rod with one number of EN -8 scerw shaft, hand operation including cost of all materials, labour, hire charges and conveyance. (50 mm)

OD36171/2023-2024:THREAD LESS portion of the screw rod (per metre rate).

OD36172/2023-2024:Providing base and nut arrangement for hoisting the shutter including cost of all materials labour etc complete.

OD36173/2023-2024:Fabrication and erection of Embedded parts of Canal shutters ( Up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

OD36174/2023-2024:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track, Seal seat etc. as per approved specifications, drawings and directions of deptl. officer at site including cost of all materials, labour, machinery for planing, welding, shearing, grinding etc., lead and lift, conveyance, incidental and handling etc. complete

OD36175/2023-2024:Fabrication and supply of Structural steel canal gate ( Less than 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD36176/2023-2024:Erection of the Canal Shutter ( Up to 2 Tonne weight )/HOISTING BRIDGE/PLATFORM including handrails, ladder etc. for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied.

OD36177/2023-2024:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE (Data for 1m)

P.Damodaran, G.R.Industries

Bidder Name

MOHAMMED MUSTHAFA V

P.Damodaran, G.R.Industries