Construction of Heliport building at Palampur Distt Kangra HP SH Providing fire alarm and fire fighting system in passengers terminal fire station and utility building therein

Supply, Installation, Testing and Commissioning of addressable multisensor smoke detector including mounting base with LED… etc. complete as required with 2 inbuilt Isolators as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements; Drift Compensation feature & Automatic addressing. Detector should monitor Electromagnetic interference and report to the panel - current and average values.Detector should have IP40 or better protection rating. EMC safety for detector shall be 50 V/m. Shall be UL/EN/VDS certification. (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector) Make: Autronica/ Honneywell (Notifire) / Bosch

Supply, Installation, Testing and Commissioning of addessable Single ACTION manual pull station & necessary fixing arrangements with key complete as required. MCP should have IP40 or better protection rating Shall be UL/EN/VDS Certified. Make: Autronica/ Honneywell (Notifire) / Bosch

Supply, Installation, Testing and Commissioning of Addressable Monitor Module with 1 input, which shall monitor normally open or normally closed contacts.The module shall have an LED to indicate module status.It Shall be UL/EN/VDS Certified. . Make: Autronica/ Honneywell (Notifire) / Bosch

Supply, Installation, Testing and Commissioning of Addressable Control Relay Module with inbuilt isolators as per NFPA 72 style 7 wiring requirements .Relay Control module shall be used for emergency control functions including shutting down Fire dampers in AHU's, tripping of AHU's, Fresh air fans, Ventilation fans, tripping of Access control doorsetc.. Shall be EN54/ Vds Certification/UL . Make: Autronica/ Honneywell (Notifire) / Bosch

Supply, Installation, Testing and Commissioning of Microprocessor based Intelligent Addressable Main Fire Alarm Control Panel with Suitable Loops modules and each loop capable of supporting not less than 250 devices (detectors & modules should be in any combination) ; Loop length up to 1.5 km, 8" Color LCD touch screen display with bright colors to indicate alarms and events, 4 Nos of Integrated Ethernet Ports & 2 Nos of RS 485 for networking, 200 Nos of Soft programmable keys with status indicators for individual triggering of NAC Ouputs, evacuation speaker zones, AHU Modules, Damper switch, Smoke extraction Fans, Lifts.. etc. The Panel shall support 10000 history logs in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 24 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger.The panel should also have IP30 or better protection. The panel shall have seamless integration with EVAC certified Public Address System and shall be complete with all accessories . EN54 / Vds/UL Certification. Make: Autronica/ Honneywell (Notifire) / Bosch

SSupplying & laying of 2x1.5 spmm fire alarm armoured cable,600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheathcomplete as required..Make Finolex/Polycab/ KEI

Supply and erection of 25 mm dia PVC conduit pipe ISI marked (Medium) recessed in wall /ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. Make Diplast/Polyplast/

Supply, Installation, Testing and comissioning of Cabinet Speaker Max Power - 9 W ,Rated power (PHC) - 6 W(6-3-1.5), Sound pressure level at rate power /1 w ,(at1kHz,1m) (at 1 kHz, 1 m) - 96dB/ 90dB,Effective frequency range (-10 dB) - 200-15000 Hz,Opening angle (at 1 kHz/4 kHz, - 6 dB),In degrees - 150/70,Rated voltage - 100 V,Rated impedance - 1667 .Make: Autronica/ Honneywell (Notifire) / Bosch

Supply, Installation, Testing and comissioning of 18U Equipment Rack with provision for housing all control equipment with front & rear door, Blower for cooling and proper locking arrangements and as per the specifications, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Makes: Valrack /Netrack/ Comrack

Supply, Installation, Testing and comissioning of 6 Zone 240 watts mixer amplifier Inbuilt Bluetooth for audio streaming supports audio playback from USB pen drive,4 microphone/line inputs,plus music source input,insert feature to use as a pre/power amplifier,optional 2 tone chime generation for input 1,frequency response 80 Hz to 18KHz (+1/3dB @ 10 dB ref. rated output),Distortion<1% @ rated output power , 1 KHz,Bass control-Max+- 8dB,Treble control-Max+- 8dB,connector-Clinch stereo converted to mono,Sensitivity-200mV to 300 mV, Impedance-22 Kohm,S/N(flat at max volume) >70dB, Headroom >25dB as required complete in all respects. Makes:-Beyerdynamic/Bosch/TOA/Brahler.

Supply, Installation, Testing and comissioning of 2 KVA Inverter with 2 hour Backup. With Rack. APC- Schneider / Vertiv -Emerson/ Eaton/Legrand-Numeric Only for UPS & Exide, Quanta & Panasonic for SMF Batteries. .

Fire Fighting

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

25 mm nominal bore

80 mm nominal bore

100 mm nominal bore

Makes:- Jindal/Hisar/Tata/Surya Tube.

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

2 way - 100 mm dia M.S. Pipe

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)

(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520

b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, (15 KW) 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.

(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.

(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.

900 lpm at 56 m Head

Make:- Kirloskar/Siemens/Grundfoss

Supply, installation, testing and commissioning of Pressure switch for fire pumps of approved make,including necessary wiring and cut off valve up to central panel & other material as described in specifications.

Make:- Indfoss /System Sensor

Providing & Fixing of burden type Stainless Steel dial type pressure gauge with brass isolation valve and pipe of 100 mm dia with Caliberation: 0-20 Kg/cm2 as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Make:- H Guru, Bell, Fiebig

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

80 mm dia.

100 mm dia.

Makes:-Zoloto/Sant/Audco

Providing and fixing Cast Iron dual plated Check Valve (NRV) horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table "E" and specifications as required complete in all respects and to the best satisfaction of Engineer-in-charge.

100 mm dia.

Makes:-Zoloto/Sant/Audco

Providing & fixing Gun Metal fire hydrant single headed landing valve with 80 mm N.B. flanged inlet, G.M spindle controlled 63 mm dia female instantaneous outlet type. SS coupling, blank cap, chain, twist release type lug & all accessories Conforming to IS standards as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Make: Minimax/OMEX/Padmini

Providing & Fixing of wall mounting swinging type first aid fire hose reel with drum, hanging bracket, 30 Mtr. length x 20 mm dia high pressure hose reel tubing as per IS: 444 with gun metal (GM) shut off nozzle having 5 mm dia orifice. The hose reel shall be conforming to IS : 884-1985. Drum shall be fixed on adjoining wall through anchor fasteners / cement concrete block as and when required complete in all respects and to the best satisfaction of Engineer-in-charge..

Make: Minimax/OMEX/Padmini

Providing & Fixing of 63 mm dia 15 m long non-percolating flexible hose (RRL- type A) as per IS : 636. Type A with G.M male & female instantaneous type coupling (IS 903) (For internal and External hydrant system) as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Make: Minimax/OMEX/Padmini

Providing and Fixing Gun Metal 63 mm dia instantaneous pattern branch short pipe, 20 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Make: Minimax/OMEX/Padmini

Providing & fixing ball valve 25mm dia. as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Make: Sant/Zoloto/Audico.

Weather proof standard fire hose cabinet made of 18 SWG powder coated fibre. sheet having single or double opening glazed (3.0 mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish (as per IS : 5, shade no. 536) with " Fire Hose" marked on front, suitable for housing 2 nos. 15m long 63 mm dia Hose pipe, 1 No. branch pipe & nozzle spanner as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Make: Minimax/OMEX/Padmini

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Fabrcated item

Providing & fixing of Bitumein sheet 4mm thick (pipekot) wraping & coating for underground pipe100 mm dia. as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Providing, installation,testing and commissioning of Stainless steel Y strainer fabricated out of 1.6 mm thick stainless steel. Grade 304 sheet with 3mm dia hole with stainless steel flange including carriage of material in all leads and lift.

100 mm dia.

Makes:-Zoloto/Sant/Audco

Providing and fixing Carbon dixoide CO2 4.5 kg type fire extingushers ISI mark. CE and EN Certfied, consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and M S Wheel type complete with internal charge as required complete in all respects.

Make: Minimax/Aska/ Anshul Fire

Providing & fixing of IS marked 15683 Water type 9 Litre (S/P) cylindrical body, squeeze lever discharge valve fitted with pressure discharge hose, discharge nozzle, etc. finished externally with red enamel paint and fixed to wall with brackets complete with internal charges.

Make: Minimax/Aska/ Anshul Fire

Providing and fixing stored pressure vessel ABC 6 Kgs. Powder type fire extingushers ISI mark. CE and EN Certfied,consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.

Make: Minimax/Aska/ Anshul Fire

Clean Agent Stored Pressure Type Fire Extinguisher 4 kg. Cap., CE Certified, filled with UL and FM approved Grenoz® / Novec Clean agent for streaming application, ISI Marked (IS15683:2018), CE Certified, Pure Polyester Powder Coated Body, Forged brass valve with in bult Pressure Relief Device and Non Return Valve for pressure gauge port fitted with Large Dial pressure gauge, EPDM hose (Applicable for 4, and 6 kg Models), Stainless Steel safetypin, High durablility Vinyl label (3M make), QR Code label with printed serial number, Individually packed incorrugated paper box together with Wall Bracket, screws & plugs.

Make: Minimax/Aska/ Anshul Fire

Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a surface the cable run shall be fixed on M.S. clamps etc. of suitable size & brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire

Armoured cable16 sq. mm (4 core)

Make: KEI/ Polycab/Finolex.