Annual Afloat repair works of WB Jamanthy at IWT Maradu Terminal Kochi During The Year 2026-27

Surface preparation of deck (required portion) and super structure including out fittings by chipping, scrapping, wire brushing, buffing etc properly such as onboard deck, anchor winch, air vent pipes, bollards, wheel house, top of galley, railings, hatches, wheel house doors, (rear side of vessel) & other fittings etc including labour and material Cost

Painting of entire deck (from water level to deck surface) and super structure including out fittings such as onboard deck, anchor winch, air vent pipes, hand pumps, bollards, wheel house, top of galley, railings, hatches, wheel house doors, engine room inside (total sides, top & ladder etc), stern gear compartment inside (rear side of vessel), toilet, bath room, canopy & other fittings etc with 2 coat of epoxy primer and 2 coats of epoxy marine quality enamel of existing colour properly including labour and material Cost.

Renewal of above water level hull and onboard deck steel plates (IS2062) of 5 / 6 mm thick of ship building quality after cropping and removal of the damaged plates by gas cutting without any damages to other fittings & also sections of underwater portion pipe to assed (to be done after getting ultrasonic test report and recommendation of Surveyor, Port Dept, Govt of Kerala) and also Re fabrication damaged anchor plate as per marine standard including labour and material cost

Overhauling of over board, the other valves on bilge, fire hydrant valves, Fuel valves and cleaning of mud box fittted onboard properly including labour cost

Cost of Spare parts will be reimbursed on (Actual+10%) basis

Electrical rectification of the Engine Room control panel, including inspection of all electrical circuits and connections, renewal of damaged wiring, terminals, switches, indicator lamps, and other defective components as required. The work shall include rectification of voltage fluctuation during generator operation, ensuring proper changeover and safe operation on both shore power and generator supply, replacement of damaged bulbs and fluorescent tubes, and supply and installation of 6 Nos. LED lights in the Engine Room complete with wiring, switches, fittings, and accessories. The work shall also include testing, commissioning, and making the entire electrical system fully functional. The rate shall be inclusive of all labour, materials, consumables, tools, tackles, testing, commissioning, and incidental charges required for the satisfactory completion of the work.

Cost of Spare parts will be reimbursed on (Actual+10%) basis

Strengthening of side railings of onboard including engine room top, wheel house front etc, renewal of M.s Pipe with new ones at damagaed portions properly by croping, welding etc including labour & material cost

Servicing of fire & bilage alaram (which is not working properly), the issue shall be rectified and renew all damaged wires inside wheel house and also repairing of solinoid switch in engine room and damaged gauages in engine room and wheelhouse including labour Cost.

Cost of Spare parts will be reimbursed on (Actual+10%) basis