REPAIR AND REPLACEMENT OF WALL PANELING, FALSE CEILING AND JOINERY WORK IN VARIOUS UNIT AT KAKSAR, CHHANIGUND, HARDAS AND APATI UNDER GE KARGIL

Amount

Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and directed by Engr-in-Charge.

S&F for second class soft wood (KAIL) plain fillets area exc 13 & n exc 25 sqcm square,rectangular or triangular in section, clean sawn, secured with nails or brads all as specified and directed by Engr-in-Charge.

S&F 12mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work all as specified and directed by Engr-in-Charge.

S&F 9mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work all as specified and directed by Engr-in-Charge.

S&F 6mm thick Plywood, grade BWR,type BB, fixed with screws to timber frame work with screws to timber frame work all as specified and directed by Engr-in-Charge.

S&F for second class soft wood (KAIL) plain fillets area n exc 3 sqcm square,rectangular or triangular in section, but bullnosed, splayed, chamfered or rounded on one edge or face clean sawn, secured with nails or brads all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames with shutters without taking off shutters from the frames not exc. 1.5 sq. m each

Taking down chowkhats or frames with shutters without taking off shutters from the frames exc.1.5 sqm but n exc 4.00 sqm each

Taking down shutters of any description exc 1 sqm and n exc 2 sq. m each

S&F second class soft wood (KAIL), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.

S&F bands, straps, supports or stays for rainwater, ventilating pipes including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains hand made sliding bolts; clamps hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F 35 mm thick second class soft wood Glazed and skeleton shutters, open rebated and prepared to raceive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered.

S&F second class soft wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by Engr-in-Charge.

S&F 30 mm thick second class soft wood Glazed and skeleton shutters, open rebated and prepared to raceive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered.

S & F butt hinges medium weight cold rolled mild steel of 100mm long

S & F butt hinges medium weight cold rolled mild steel of 75 mm long.

S & F aluminium alloy, anodised sliding door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long.

S&F Aluminum Anodised barrel tower bolts of extruded section, 150mm long.

S & F anodised aluminium handle, cast type anodised section 150mm size.

S & F mild steel pressed handle oval type stove enamelled black of 100 mm long.

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F sheet glass 3.00 mm thick ordinary quality, and glazing with oil putty in square nexc. 0.50 Sqm each pane all as specified & directed.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165

S&F in repair 300mm long mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified

S&F in repair 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed

M&L for prepration of new wooden surfaces of any description, not otherwise descri-bed over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer.

S&F in repair harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc

S&F in repair cast iron door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

Dismantling unframed timber scantlings 40sq. cm and over in section, in any position all as specified.

S&F second class soft-wood in scantlings clean sawn timber framed and fixed in position.

S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

Note : Deduction for amount of Rs 37,800.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

M/S HAJI HASSAN ENGINEERING WORKS

M/S ABASS ENTERPRISES

M/S SHAH AND SHAH CONSTRUCTION

M/S UNIVERSAL ENGINEERS

M/S MOHD ALI

M/S MOHD HUSSAIN

M/S SAJJAD HUSSAIN