REPAIRS TO FLOOR, WALL PLASTER, JOINERY, TILES, ROOF AND OTHER MISC B/R WORKS INCLUDING REPAIRS TO SEWAGE LINE, MANHOLE COVERS RAIN WATER PIPES AND MISC ITEMS AT VARIOUS LOCATIONS OF AF STN GANDHINAGAR UNDER GE (AF) CHILODA

Amount

M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying one coat of white wash complete all as specified and as directed.

M&L for preparing of old surfaces of ceiling and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparing of old surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparing of old surfaces of walls and applying one coat of cement based paint.

M&L for preparing old surfaces of wall and applying one coat of exterior emulsion paint complete all as specified and as directed.

M&L for preparation of old wood surfaces of any description, not otherwise described, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of wall/ concrete surfaces over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces and applying two coats of synthetic enamel paint complete all as specified and as directed.

Dismantling of corrugated, semi corrugated, steel, fibre sheets in roof coverings complete all as specified and as directed.

S&F 0.63 mm thick, galvanized, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws, in roof coverings walls etc with grade of zinc coating 275 complete all as specified and as directed.

S&F pre-coated galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screw complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) to receive tiles etc on vertical surfaces of walls complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 300x200x7mm, thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for virified ceramic tiles 10mm thick (square/ rectangular) polished, dark shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc. complete all as specified and as directed.

All as per Item No. 19 above but on vertical surfaces/ skirting.

M&L for granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) size not exceeding 1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) size exceeding 1.5 sqm & not exceeding 4.00 sqm each complete all as specified and as directed.

S&F 30mm thick flush door shutter, solid core construction with block board core and ply wood face panels, commercial type on both faces complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

All as per Item No. 27 but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly.

S&F aluminum alloy, anodized, sliding door bolt of length 250mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.

S&F 150mm size aluminum handles, cast type anodised complete all as specified and as directed.

S&F aluminum anodized barrel tower bolt of extruded section, length of bolt 150mm complete all as specified and as directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F in repair door closer hydraulically regulated designation No. 3 universal type, aluminium (extruded section) suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm length complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1998 grade St.-240 complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F for 4 mm thick sheet glass oridinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and as directed.

M&L for brick work with sub class 'B', old size bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and asdirected.

Taking down cement or cement lime plaster any description including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 10mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces of walls finished even & smooth without using extra cement complete all as specified and as directed.

M&L for 10mm thick cement plaster in CM (1:3) as in ceiling finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparing new surface of wall and applying two coat of oil emulsion distemper over a coat of chalk whiting complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

Dismantling water tanks exceeding 250 Litres but not exceeding 500 Litres capacity complete all as specified and as directed.

Dismantling water tanks exc 500 Litres but not exceeding 1000 Litres capacity complete all as specified and as directed.

S&F rotational moulded water storage tank 500 Ltrs capacity double layer (cylindrical/ vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F rotational moulded water storage tank 1000 Ltrs capacity double layer (cylindrical/ vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 25mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Disconnecting existing tanks exceeding 250 Ltrs and not exceeding 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed. Note:- Bleeching powder to be spread in the bottom of tank before fixing/ installing in position.

Disconnecting existing tanks exceeding 500 Ltrs and not exceeding 1000 Ltrs setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed. Note:- Bleeching powder to be spread in the bottom of tank before fixing/ installing in position.

Disconnecting existing tanks exceeding 1000 and not exceeding 2000 Ltrs (including UG sumps), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed. Note:- Bleeching powder to be spread in the bottom of tank before fixing/ installing in position.

Taking up or down steel tubing pipe and connections 15mm bore complete all as specified and as directed.

S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F 15mm bore unplasticised PVC pipes with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F 20mm bore unplasticised PVC pipes of pressure rating 10 kgf/ sqcm fixed complete to walls, ceilings or in floors etc. any type of pipe complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.

S&F in repairs vitreous china squatting pan, orissa pattern of size 580x440mm, white with integral foot rest incl connection to trap and flushing pipe complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) 'P' or 'S' type (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specified and as directed.

S&F plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover complete all as specified and as directed.

S&F 32mm brass chromium plated waste coupling for wash hand basin complete all as specified and as directed.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed.

S&F in repairs Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and as directed.

S&F in repairs stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for runions and fixed to 15mm bore pipe complete all as specified and as directed.

S&F in repairs 32mm size waste pipe for wash hand basin/ urinal/ sink complete all as specified and as directed.

S&F in repairs toilet paper holder complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 190 gms) complete all as specified and as directed.

S&F in repairs health faucet with flexiable stainless steel hose and hook complete all as specified and as directed. Make:- Cera Cat No. FB30401AB or equivalent make as approved by GE.

S&F in repair stainless steel sink with drainage board made out of 1.0mm thick sheet of overall size 915x460mm with bowl size 410x330x160mm with plugs washers, CP waste coupling and 40mm dia GI light grade waste pipe upto chamber fixed on and including cantilever angle iron 25x25x6mm (2 Nos) brackets complete including making good the disturbed surface using PCC (1:2:4) type B1 (using 20 mm graded stone aggregates) complete all as specified and as directed.

S&F in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Demolition of cement concrete (unreinforced) concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 75mm thick cement concrete type D2 (1:4:8) (40 mm graded graded aggregates) as in floor finishes and pavings complete all as specified and as directed.

M&L for 20mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and as directed.

M&L chequred cement concrete tiles 20cm x20cmx25mm thick with grey cement and pigment, set jointed in neat cement slurry complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with rubber mould finish laid in floor etc complete all as specified and as directed.

M&L for providing precast cement concrete solid building blocks or slabs 10cm thick type B1 (1:2:4) (using 20mm graded aggregates) (with plain or interlocking joints as directed) setting in mortar, complete, in walls set in CM (1:4) complete all as specified and as directed.

S&F powder coated aluminium frame for door, windows and ventilators and partition wall with one or more rebates fixed in position as per manufacturer's instruction including necessary joining cleat, glazing clips, rubber packing, beading etc complete all as specified and as directed.

S&F 5mm thick sheet glass ordinary quality alongwith EPDM rubber all around glass edges exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F solar control film 50 micron thick reflective type, sticked to glass pane as per manufacturer's instructions complete all as specified and as directed.

S&F in repair MS mortice lock vertical type 4 lever of size 100mm complete all as specified and as directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm length complete all as specified and as directed.

S&F in repair aluminum alloy, anodized, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.

S&F 20mm dia SS tubular curtains rod with brakets fancy type for doors and windows etc including taking down old curtain rod complete all as specified and as directed.

S&F grating round 140mm size of PTMT (Minimum weight 50 gms) complete all as specified and as directed.

S&F in repair soap dish SS, complete all as specified and as directed.

Dismantling/ removal of old membrane, geotextile etc materials of any description and removal material out of MOD land/ sites complete all as specified and as directed.

M&L 30mm average thickness PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates) as in padding and (roof levelling course) on roof surfaces using water proofing compound complete all as specified and as directed. Note:- Water proofing compound to be used @ 3% by weight of cement content for concrete padding work.

M&L for rendering in CM (1:3) 10mm thick over RCC roof, chajja/ brick wall mixed with water proofing compound @ 3% by weight of cement finished even and fair without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for treating walls and parapets, down facia and chajjas etc. for water proofing treatments by using Dr. Fixits Newcoats (Pidilite) by using fibre mesh 45 gms as per manufacturers instruction after preparing the surfaces by cleaning, washing and removing all loose dirts/ dust etc and filling the cracks by cutting 'V' type grooves on Horizontal or vertical surfaces with Dr. Fixits SBR, Crax X powder and cements with professional applicators of Dr. fixits and manufacturers complete all as specified. Note:- 1. The written warranty certificate from auth applicator/ manufacturers to be obtained and produced to the department. 2. The RWP/ waste pipe and water pipe line junction area to be sealed properly and effectively. 3. The rate of scaffolding upto 2nd floor is included in the unit rate.

M&L for treating roofs and projections for water proofing treatments by using Dr. Fixits Newcoats (Pidilite) by using fibre mess 45 gsm as per manufacturers instruction after preparing the surfaces by cleaning, washing and removing all loose dirts/ dust etc and grinding/ filling the cracks by cutting 'V' type grooves on Horizontal or vertical surfaces with Dr. Fixits SBR, Crax X powder and cements with professional applicators of Dr. fixits and manufacturers complete all as specified and as directed. Note:- 1. The written warranty certificate from auth applicator/ manufacturers to be obtained and produced to the department. 2. Taking down and removing of existing roof treatment away from the premises is included in the unit rate. 3. The RWP/ waste pipe and water pipe line junction area to be sealed properly and effectively.

M&L ATT along the external/ internal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

M&L treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.

M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/ hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

S&F in repairs to 1st class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. and removing/ taking down old beads complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F armstrong make armgyp tiles 9mm thick size (600x 600mm) with using 24mm prelude grid with all material and labour etc. complete all as specified and as directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and getting out in soft/ loose soil complete all as specified and as directed.

All as per Item No. 109 above but exceeding 1.5m and upto 3.0m deep.

All as per Item No. 109 above but exc 3.0m and upto 4.5m deep.

Returning filling in including spreading, levelling, watering and well ramming in later on exceeding 25 cm in soft and loose soil complete all as specified and as directed.

Removing excavated material not exceeding 50m and depositing where directed at level not not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks strainght or curved on plan exc 6 mtr mean radius, built in cement mortar (1:4) complete all as specified and as directed.

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregates) as in coping or benching of manhole etc including necessary formworks complete all as specified and as directed.

Demolition and breaking up of 150mm dia salt glazed stone ware drain pipe including PCC packing under hunching against the sides of bed and complete PCC bed complete all as specified and as directed.

All as per Item No. 116 above but 200mm dia pipe.

Dismantaling of 75mm dia pipe cast iron or reonforced concrete drain pipe incl PCC packing under haunching against the sides of bed and complete PCC bed complete all as specified and as directed.

All as per Item No. 118 above but 100mm dia pipe.

M&L for rendering 15mm thick in cement mortar (1:4) on brick wall/ stone masonary wall surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 150mm dia class 'A' salt glazed stone ware drain pipe (ISI marked) of approved make laid in trenches jointed in CM (1:1) complete all as specified and as directed.

All as per Item No. 121 above but 200mm dia pipe.

M&L for concrete bed to drain pipes 150mm dia including packing under and haunching and packing against the sides of pipes after they are laid and tested in cement concrete (1:4:8) type D2 (using 40mm graded stone aggregates) complete all as specified and as directed.

All as per Item No. 123 above but 200mm dia pipe.

S&F 75mm dia cast iron soil, waste and vent sand cast pipes, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and as directed.

All as per Item No. 125 above but 100mm dia pipe.

S&F 75mm dia cast iron soil, waste and vent sand cast pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and as directed.

All as per Item No. 127 above but 100 mm dia pipe.

Desilting of manhole up to 1.50m depth and stacking the silt at the distance exceeding 100m but not exceeding 250m complete all as specified and as directed.

All as per Item No. 129 above, but depth of manhole exceeding 1.50m and not exceeding 2.50m.

Desilting of soakage well/ septic tank for 50 users with dewatering including carriage of sludge from tank and disposed to a distance outside of MOD land complete all as specified and as directed.

All as per Item No. 131 above, but septic tank of 100 users capacity.

All as per Item No. 131 above, but septic tank of 150 users capacity.

All as per Item No. 131 above, but septic tank of 200 users capacity.

Cleaning of WC/ EWC and removal of blockage by pumping of waste complete all as specified and as directed by Engineer-in-Charge.

Cleaning of nahani trap 75mm dia and removal of blockage complete all as specified and as directed by Engineer-in-Charge.

Cleaning of gully trap of size 125/ 110mm and removal of blockage complete all as specified and as directed by Engineer-in-Charge.

M&L for precast RCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in cover slab for soakage well/ manhole and similar works supported on walls and set in cement mortar (1:4) including necessary formwork and demolition of old covers complete all as specified and as directed by Engineer-in-Charge.

Removal of blokage/ choke up obstructing the flow of sewage line of stoneware pipe and RCC pipe between two consecutive manholes or gully trap to manhole by rodding with rods/wood/kamathis/ choke remover and flushing water in line after rodding to clean the line for 100mm dia pipe complete all as specified and as directed by Engineer-in-Charge.

All as per Item No. 139 above, but for 150mm bore pipe complete.

All as per Item No. 139 above, but for 200 mm bore pipe complete.

Cutting in to existing manhole of any type for connecting 150mm dia pipe new drain, making good to pipe and rendering, cutting out existing benching, for and forming branch channel (½ round or ¾ section) in cement concrete (1:2:4) type B1, smooth finish and reforming benching as required complete complete all as specified and as directed by Engineer-in-Charge.

All as per Item No. 142 above, but 200mm dia pipe.

S&F mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in vertical surfaces/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

All as per Item No. 146 above but on vertical surfaces/ skirting.

S&F cast iron bends (any radius), diminishing pieces or tapers 75mm dia (larger bore measured) complete all as specified and as directed.

S&F cast iron bends (any radius), dimisishing pieces or tapers 100mm dia (larger bore measured) complete all as specified and as directed.

S&F cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75mm dia complete all as specified and as directed.

S&F cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100mm dia complete all as specified and as directed.

S&F in repair PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F in repair PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F in repair PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75mm dia complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm dia complete all as specified and as directed.

S&F in repairs seat cover for pedestal pan complete all as specified and as directed.

S&F in repairs, grating in square of 150mm size of PTMT complete all as specified and as directed.

divyarsh entrprise

Ramdev and Sons

JIYA CONSTRUCTION