COMPREHENSIVE MISC REPAIRS TO MD ACCN OF ABOD FD WKSP MES ACCN RWA IN ZONE A AT A A BANAR UNDER GE BANAR

Dismantling loose concrete cover of RCC coloums, beams, slabs, Chajjas (Soffit only), and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm of 2 mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing 30 mm thick (average thickness) guniting mix (using 1 part of ordinary portland cement 53 grade and 2 parts of ghaggar sand mixed with adhesive/admixture at the rate as per manufacturers instruction or 3% by wt of cement all as directed with a pressure of 2 to 2.5 kgs per sqm by guniting machine and surfaces finished even and fair, including 15mm thick plaster in cement mortar 1:4, necessary padding, steel scaffolding and shuttering for working platformm/formwork etc complete all as directed (Guniting work is to be carried out upto 06 mtr height from ground level). Notes :- (i) Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co. or their authorized dealer.

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) complete all as specified.

All item as per Ser No 2.00 above but exc 1.5 sqm but n.exc 4sqm each complete all as specified.

Taking down shutters of any description exc 1sqm but not exc 2 sqm each complete all as specified.

S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, cooler stand etc complete all as specified.

S & F aluminium powder coated three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below :-- (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21447) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21446) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 21455) (d) Interlock Section of Shutter shall be be of size 18.00 x 40.00 x 1.50 (Section No 21454) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 20844) Note:-(i) Section Number given above are of make Jindal, Contractor may use similar section of other make mention in Appx B.

M&L for powder coated aluminium grill in repairs of powder coating of minimum 50 micron with aluminium mesh of sze 50x50mm with square tube solid 5mm thick including aluminium channel of size thickness of channel 1.5mm complete all as specified and directed.

Supply and fix 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc complete all as specified.

S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type both sides (ISI marked) all with 6mm thick teak wood edging all around complete all as specified.

M/L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of primer complete all as specified.