Online item rate tenders for construction of Porta Cabin Classroom at JDM College

Amount

PORTA CABIN

Demolishing mud phaska in terracing and disposal of material within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work above plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

12 mm cement plaster of mix (Junctions of all RCC and brick shall be provided with chicken wire mesh of 150 mm width on either side of the junction before plastering) 1:3:3 (1 cement: 3course sand: 3 fine sand)

Internal painting works: Internal painting works at all heights and levels as per procedure mentioned including 1) Surface preparation (scrapping, sanding, cleaning) 2) One coat of Wall Primer as per manufacturers specification 3) Coat of White cement based putty (JK/BIRLA) 4) One liberal coat of wall primer over wall putty 5) Painting 2 or more coats of Premium acrylic emulsion of interior grade, having VOC content less than 50 grams/ litre in various colors (Asian/ ICI /Shalimar/ Berger/ Nerolac) (Including all labour, materials, ladder, scaffolding etc.)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Structural steel work riveted, bolted or welded in built up sections, tubular sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. The contractor shall submit a Shop drawing of the Porta Cabin Structure along with a Structure Stability Certificate for the porta cabin structure issued by a registered structure engineer along with a copy of the registration certificate of the structure engineer

Providing and installing PUF SANDWICH Wall Panels (100 mm Thick) with 0.5 mm thick PPGI Sheet on both sides and weatherproof interlocking panel jointing system of JINDAL PUF or equivalent make. Contractor will take approval of wall PUF panel make and color options from the college authorities before procurement of materials

Providing and Installing 100 mm thick PUF insulated Sandwich Walls with 0.5m thick PPGi sheet on both sides for ceiling. Roof panel shall be of JINDAL PUF or equivalent make. Contractor will take approval of roof PUF panel make and color options from the college authorities before procurement of materials

2mm Thick 450 mm wide Powder Coated Aluminium Flashing around the parapet wall to prevent water seepage around the porta cabin

Providing and Fixing AF-40-55 mm thick WOODEN ACOUSTIC DOOR WITH FRAME-TESTED FOR STC of 40 dB providing ECOTONE,PROMAT or equivalent make Acoustic Doors for 40 dB sound insulation (ARAI certified) Marketed by coruscant trading LLP. The doors system duly tested for Integrity and Insulation Criteria as per the IS: 3614 Part-2 and BS: 476 Part: 22 specified in IS:3809-1979 and BS: 476 Part-20 & 22 1987 to achive the required integrity and insulation Door Frame : Providing of 1st class Teak wood frame of section 120 mm x 60 mm with density of 650 kg/meter cube. Including Stainless Steel hardware , Hinges, Screws, 300 mm Stainless Steel L drop, Godrej Heavy Duty Hydraulic Door Closer etc. complete Door size: 1: (2000mm X 2250mm) Double Leaf 2: (1500 x 2250mm) Single Leaf

Providing and fixing aluminium sliding glazed/wiremesh window upto 1.50 m in height dimension comprising of 3 track aluminium sliding window fixed frame Jindal Section 21401 , fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing/wire mesh,paneling and dash fasteners to be paid for separately). For Fixed Portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) window Size: (1200mm x 1350mm)

Providing and fixing aluminium sliding glazed/wiremesh window upto 1.50 m in height dimension comprising of 3 track aluminium sliding window fixed frame Jindal Section 21401 , fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing/wire mesh,paneling and dash fasteners to be paid for separately). For sliding portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of Jindal aluminium section 21481 and 19442.

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications,drawings and direction of Engineer-in-charge complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including Spacers, grouting the joints with white cement and matching pigments etc,complete. Size of Tile 600x600 mm (Kajaria, Orient, Somani, Asian Make Only). Basic cost of tile before tax Rs. 60/- per Sq. Ft.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, dado, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm (Kajaria, Orient, Somani, Asian Make Only). Basic cost of tile before tax Rs. 60/- per Sq. Ft.

Providing and fixing 2 x 2 grid false ceiling (tiles and frame) at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking Heavy Duty T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. With Ceiling Tile of Armstrong Make Dune max RH99 or equivalent from Gyproc Only

Computer Table: The table shall be of size 1050 (W) X 600 (D) X 750 (H). Table design shall be as per drawing. The work surface of the table shall be made of branded 18 mm thick BWP grade plywood (only duro / green/ virgo or sundek make) with 1mm thick laminate (only of Merino /sundek /virgo make) top with 6 mm thick polished teakwood beading. All under structure made out with 25mm thick square pipe with 1.25mm thick wall thickness. All metal structure shall be welded by MIG/CO2/Electric welding. All steel structural components shall be processed and made from virgin material sourced from SAIL/TataSteel/Jindal only and tested conforming to IS: 513/ IS: 2062.The powder coated components are on regular basis tested for Scratch resistance test of 4 kgs & for Impact resistance test for 150kgs/cm. complete upto the satisfaction of the college authorities. The manufacturer shall submit test certificates from govt. approved testing labs at his own cost to the satisfaction of the owner and engineer incharge. Tables shall have high quality heavy duty PVC/Rubber/EPDM buffers to avoid damage to floor tiles. The table shall have One No.s Keyboard Tray of EBCO make cat.no. KTE 1-45 (without mouse tray) Contractor shall submit full scale sample table along with test certificate of steel, paint, laminte and plywood to confirm the quality of material used and manufacturing process.

Chair: 33” Inch high chair with a comfortable padded seat and backcushion upholstered in a stylish Polycottonfabric (minimum 120/- meter).Cushioned black armrests over a Stainless-Steeltubular frame of minimum 1.6 mm thickness. Chairs shall have high quality heavy duty PVC/Rubber/EPDM buffers to avoid damage to floor tiles. Godrej Virtue Study Chair or approved equivalent in Featherlite, Durian , Geeken.

Fire Extinguisher: Providing and fixing ABC powder type fire extinguisher suitable for inverted operation and fabricated from 1.6 mm M.S. sheet internally protected with anticorrosive treatment and hydraulically tested to a pressure of 25 Kg/Sqcm.Extinguishers externally painted with red enamel and fixed to wall with brackets complete with internal charge and spanner (Conforming to IS:13849 capaicity 6 Kg.).

Disposal of moorum / building rubbish / malba / similar unserviceable, dismantled or waste material by Mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.

Wiring for the light points with 1.5 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires of approved make in concealed or surface mounted 25 mm dia 16 gauge MS Conduit including providing and fixing of 6 amps single pole modular switch of approved quality colour make & design in 1.6 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire.

Wiring for ceiling fan point with 1.5 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible "FRLS" wires in concealed or surface mounted 25 mm dia 16 gauge MS conduits, including providing fan hook box, 6 amps switch and 300 watts electronic step type fan regulator of approved make in GI box and earthing the fan and outlet box with 1.5 sq. mm. PVC insulated copper conductor stranded flexible FRLS wire.(including circuit wiring from DB to switch Board).

Wiring for 250 volts single phase and neutral 16 amps modular switch socket outlet with universal pins with 3 x 4 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible "FRLS" wire in concealed or surface mounted 25 mm dia 16 gauge MS conduit / existing raceway including providing and fixing of 16 amps 3 pin modular switched sockets of approved make and design in 1.6 mm thick GI box with grid plates and earthing the third pin of each socket outlet with 4 Sq mm PVC insulated copper conductor stranded flexible "FRLS" wire. Primary point for 16 amps switched socket outlet

Wiring for 250 volts single phase and neutral 6 amps modular switch socket outlet with universal pins with 3x2.5 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible "FRLS" wire in concealed or surface mounted 25 mm dia 16 gauge MS conduit / existing raceway including providing and fixing of 6/16 amps 3 pin modular switched sockets of approved make and design in 1.6 mm thick GI box with grid plates and earthing the third pin of each socket outlet with 2.5 Sq mm PVC insulated copper conductor stranded flexible "FRLS" wire. Primary point for 6 amps switched socket outlet

Same as item no. 29 above but secondary point looped with primary point

Wiring for 250 volts single phase and neutral 16 amps polycarbonate industrial 3 pin (IP 65/66) socket outlet with 16 amps double pole MCB in a poly carbonate enclosure of approved size and design with 3x4 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible "FRLS" wires in concealed or surface mounted 25 mm dia 16 gauge MS Conduit, including providing and fixing of 16 amps socket and DP MCB (IP 65/66) in poly carbonate enclosure and earthing of third pin of the socket with 4 sq.mm PVC insulated copper conductor stranded flexible FRLS wire.

Wiring for Exhaust fan point with 1.5 sq. mm. insulated copper conductor 1100 volts grade stranded flexible "FRLS" wires of approved make in concealed or surface mounted 25 mm dia 16 guage MS Conduit including providing and fixing of 6 amps flush mounted switch at the normal switch level in 2 mm thick GI box and 6 amps 3 pin flush mounted socket near exhaust fan and earthing of exhaust fan through the third pin of the socket outlet and GI box with 1.5 sq. mm. PVC insulated copper conductor flexible "FRLS " wire.

Providing and fixing in position the following 2mm thick PVC rigid conduits concealed or exposed as called for including all accessories i.e. bends, junction boxes, with cover plates of approved make and design. 20 mm dia PVC conduit

Providing and fixing in position the following 2mm thick PVC rigid conduits concealed or exposed as called for including all accessories i.e. bends, junction boxes, with cover plates of approved make and design. 25 mm dia PVC conduit

Supplying of following 1100 volt grade XLPE insulated PVC sheathed copper conductor armoured cable as per specification. 4 core 6 sq. mm

Supplying of following 1100 volt grade XLPE insulated PVC sheathed copper conductor armoured cable as per specification. 3 core 6 sq. mm

Supply, installation, testing and commissioning of the following cubicle type 1.6 mm thick CRCA sheet steel enclosed and partitions to segregate phases recessed in wall or surface mounted final distribution boards of the following description. Distribution board shall be powder coated and double door construction and in four tier configuration. 6 way TPN DB with 12 No 10/16/20/32 amps SP MCB as outgoing and 3 No. 32 amps DP RCCB’s of 100 mA leakage current including 1 No. 16 amps 4 Pole MCB as incomer & separate neutral link for each phase and earth bar.

Supplying, fixing, testing and commissioning of following bare Copper/GI tapes including all necessary fixing accessories and effecting connections. 8 SWG GI wire

Pipe Earthing as per IS:3043 with perforated 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300 mm and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance as required.

Supply, laying, connecting, testing and commissioing of Single core 120 sq.mm Green colour cable (UPS neutral earthing).

Supply, installation, testing and commissioing of Bulk Head lighting fixture Philips make FXC-101 or equivalent complete with PL-9 lamp. with all fixing accessories etc. as required.

Supply, installation, testing and commissioing of Ceiling fan 1400 mm dia of approved make complete with all accessories as required.

Supply, installation, testing and commissioing of Propeller fan upto 450 mm sweep of approved make complete with louvars all accessories as required.

Supply, installation, testing and commissioing of Propeller fan upto 300 mm sweep of approved make complete with louvars and all accessories as required.

Supply, installation, testing and commissioing of Recessed mounted Slim linear light fixture: PHILIPS DN296B LED12S-3000 PSU WH (11W X 1200 LUX) or complete with all accessories as required.

Supply and fix wall mounting Fluorescent tube light fitting, 1x 28w, 230V Energy efficient T5, Box type, epoxy powder coated CRCA sheet housing with reflector cover channel, with electronic ballasts, bipin holders, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.(make bajaj- cat no. 160483) or equivalent model in philips adn CG

Supply, installation, testing and commissioning of flush mounted outlets wired to T 568 A or B with British style faceplace. The plastic shall be high impact, flame-retardant, UL rate thermoplastic. Dust cover/ blank shall be provided to protect unused faceplate openings. Termination caps and plastic over should be provided to protect jack wiring. Quoted price shall be inclusive of 1.6 mm thick GI Boxes. Single outlet faceplate with RJ-45 jack

Supply, installation, testing and commissioning of 4 pair Category 6 LAN cable consisting of 24 AWG solid copper conductors and as per the specification. The cable should have flexible Jacket & ripcord for easy stripability

Supply, fixing, cable termination, testing and commissioning of Tag Blocks and boxes with lockable door etc. as required. 10 pair tag box

Supply and fixing telephone outlets with grid plate and RJ-11 jack in 1.6 mm thick GI box complete including cutting, chases, fixing of GI boxes and making good (Cover plate shall match the colour size and make of wiring accessories to be used in the project).

Supply, laying, installation, testing and commissioning of following PVC insulated tinned copper conductor cable / wires in existing cable tray / conduits. 2 pair 0.61 mm wire

Supply, installation, Testing and commissioning of the following rating UPS as per specifications and complete in all respects. 10 KVA ONLINE UPS with 30 min battery back up of 1 phase input & 1 phase output. Quoted price shall be inclusive of approved rating single core copper conductor cable connecting UPS. All equipment shall be housed in individual cabinets. (EATON , PEGASUS or SCHNIEDER ELECTRIC MAKE ONLY)

Supply Installation Testing and Commisssioning of VRV Cassette AC including : 1) Insulated Refrigerant Piping (20-25 meter oneway) 2) Electrical Cabling between indoor and Outdoor unit 3) Enamel painted MS Baseframe / Platform for mounting outdoor / indoor unit 4) Suitable for 230V±6%, or 415V±10%, 50 Hz. supply 5) Electrical Control and Panel (APPROVED MAKES DAIKIN , MITSUBISHI, O-GENERAL, TOSHIBA) 2.5 TR CEILING SUSPENDED SPLIT UNITS

Supply Installation Testing and Commisssioning of VRV SPLIT AC including : 1) Insulated Refrigerant Piping (20-25 meter oneway) 2) Electrical Cabling between indoor and Outdoor unit 3) Enamel painted MS Baseframe / Platform for mounting outdoor / indoor unit 4) Suitable for 230V±6%, or 415V±10%, 50 Hz. supply 5) Electrical Control and Panel (APPROVED MAKES DAIKIN , MITSUBISHI, O-GENERAL, TOSHIBA) 1.5 TR HI WALL SPLIT UNITS

Supply, installation, testing and commissioning of rigid PVC drain piping for indoor units complete with necessary fittings, supports as per specifications and duly insulated with 6 mm thick closed cell elastomeric nitrile rubber tubing class ''O" secured with approved adhesive. (Provide 'P' type trap in each drain pipe for all indoor units). 32 MM DIA

Supply, installation, testing and commissioning of rigid PVC drain piping for indoor units complete with necessary fittings, supports as per specifications and duly insulated with 6 mm thick closed cell elastomeric nitrile rubber tubing class ''O" secured with approved adhesive. (Provide 'P' type trap in each drain pipe for all indoor units). 40 MM DIA

SIGNAGE: Signage for Fire Saftey : Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat.

Shilpkar India Pvt Ltd

Bhagirath Ram

PDM EINEERSNG