REPAIRS TO PCC ROADS ROAD FURNITURE KERB STONES FOOT PATH CULVERT ETC AT UARF KULAMAVU AND NEW TECHNICAL AREA OF NPOL KOCHI

Amount

Demolition of brick/block work or stone boulder masonry built in cement mortar complete all as specified and directed by Engr-in-Chrage. Note: The rate is including removal of debries/waste material from the working site before completion/ after completion of work.

M&L pre cast concrete block masonary 1:3:6 type C1 (20mm graded aggregate) with solid block exceeding 10 cm in width and seting CM 1:6 complete all as specified and directed by Engr-in-Chrage.

Taking down cement plaster on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engr-in-Chrage. Note: The rate is including removal of debries/waste material from the working site before completion/ after completion of work.

M&L for Rendering 15mm thick in CM 1:4 on surfaces other than fair face of brickwork or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Chrage.

M&L for preparing the new plastered surfaces and applying two coats of cement base paint over primer on walls all as specified and direcrted by Engr-in-Chrage.

M&L for preparing of old surfaces and applying two coats of cement base paint on walls all as specified and direcrted.

M&L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge.

M&L for applying two coats of synthetic enamel paint over a coat of priming paints plaster primer including preparation of old cemented surfaces of kerb stone etc. of any description exc. 10cm width or girth complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M&L cement concrete type D-2 1:4:8 (40mm graded aggregate) as in floors and pavings of 75 thick all as specified and as directed

M&L Screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20 cm x 25 mm thick set joined and pointed in neat cement slurry in floors with white cement and pigment complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (20 mm gd aggregate) as in filling of post holes,bed block Ditto, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L cement concrete type D-2 1:4:8 (40mm graded aggregate) as in floors and pavings of 100 thick all as specified and as directed

Supply and laying fine aggregate 50mm thick spreading and levelling in layers n exc 25cm thick incl consolidation complete all as specified and directed.

M&L Machine presses precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed.

M&L painting to old steel and iron surface exc 10 cm width or girth and applying two coats of synthetic enamal paint including preparation of surfaces complete all as specified and directed.

Taking down existing unserviceable delineators of any type, provision of 3M Black & White Road Delineator vertical Post metal body of size 1200mm long with rectangle shape fitted with 500mm long highely reflective reflector around including excavation and earthwork in soft / loose soil, including provision of PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in blocks of size 150mm x 150mm x 150mm for erecting delineators, complete all as specified and directed by Engr-in-Charge. MAKE:- 3M / DARKEYE / AVERY / SIGNTECH.

Taking down existing unserviceable direction board of any size and any type, provision of direction boards of size 1200mm x 600mm made of high intensity primatic grade reflective sheeting (HIP type IV refelctive sheeting) pasted on 3mm thick aluminium composite sheet back with frame made up of MS angle iron of size 25mm x 25mm x 3mm and fixing post (2Nos) of MS angle iron of size 50mm x 50mm x 5mm duly painted with two coat of synthetic enamel paint over a coat of ed oxide primer and shall be grouted in ground with proper size of concrete block in PCC (1:3:6) type C2 (using 40mm graded stone aggregate), complete all as specified and directed. MAKE:- 3M / AVERY or techno-commercially equivalent make as approved by AGE(I).

ZOOM ENTERPRISES