11 /EE/PMD/PHED OF 2024-2025/Sl6

Amount

Supply Delivery at site river bed tubwell submersible pumping machinery directly couple with integral vertical hollow shaft submersible squirrel cage induction motor suitable for river bed tube well having power supply at 400+ 10%, 50Hz + 6%, 3Ph. with Capacity: Discharge - 50-20 m3/hr at the Head of -Range (15-31) mtr. RPM: 2900 rpm. 5 HP or equivalant Material of construction Pump bowl housing: CI Pump and motor shaft: SS, Impeller: SS, type of starter: DOL starter, Speed: 2900 rpm. with 3 mtr lead cable. Make: PHED approved make [Test certificate, MOC, curve chart & warrenty certificate must be submitted at the time of delivery] (Materials should be supplied after taking approval from department.)

Supply & delivery of 80mm dia. Heavy duty U.P.V.C. column pipe, 4mm thickness with both end threaded including one socket and threaded protector with allowable hydrastatic pressure 21kg/cm2 (1.5mtr long each) (material will be supplied as per requirment no extra material will be received by depertment)

Supply and delivery of 80mm dia CIDF Non Return valve Conforming to IS:5312, Part-1 (P.N.-1.0) Make: PHED Approved make

Installation of above submersible pumping machinery with column pipe, reducer/extension and all pipe fitting, submersible power cable connection and fitting. at deep tube well making all connection supplying nut bolt, gasket, require materials, for submersible pump motor etc. required complete in all respect rate is including hiring charge of tripod lifting arrangement, welding machine etc. as per direction of EIC. (Any item or accessories not considered in the specification but required to complete the job have to be supplied and installed , no extra charges will be provided for this purpose)

Supply and delivery at site of 10.0 sq.mm, 3 core, 1.1 kV XLPE insulated Ar. Al. conductor cable from submersible pump to MCC panel Conforming to IS: 7098 ( part-I) 2011 Make: PHED approved make ( for three submersible pump)

Supply and delivery at site of 16.0 sq.mm, 3 core, 1.1 kV XLPE insulated Ar. Al. conductor cable from submersible pump to MCC panel Conforming to IS: 7098 ( part-I) 2011 Make: PHED approved make (for two submersible pump)

Sand cutting and laying of 10/16 sqmm 3 core XLPE insulated Ar. AL conductor cable through existing PVC pipe with MS clamp after laying cable & refill the sand.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supply, delivery & installation at site of 2.5 sq.mm, 3 core, 1.1 kV XLPE insulated Ar. Cu conductor cable Conforming to IS: 7098 ( part-I) 2011 Make: PHED approved make ( for 4 nos. submersible pump)

Supply and delivery at site 100 mm dia butterfly valve with P.N 1.6 delivery side as per IS 13095 (make: PHED approved)

Installation of above valve on the delivery side of the pump as per direction of EIC

Add GST @ 18%

Add CESS @ 1%

SUNRISE ENGINEERING CORPORATION (BID ID -5780820)

M/s. SOMA ENTERPRISE (BID ID -5780809)