Providing Aluminium partition in NANO Material Research Laboratory, in room no. 301, SMSE

Amount

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felts etc. Aluminium sections shall be smooth, rust free straight, mitred and jointed mechanically wherever required including cleats angle, aluminium snap beading for glazing/paneling, CP.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid separately)

Providing and fixing with float glass panes of 5.50mm thick for glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-incharge. (Cost of aluminium snap beading shall be paid in basic item)

Providing and fixing Aluminium composite panel (ACP) board in paneling fixed in aluminium doors, windows shutters and partitions frames with CP. brass/stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Providing and fixing 150mmx10mm aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing best quality aluminium door stopper with bush including cost and conveyance of all materials and labour charges etc. complete.

Providing and fixing 125mm aluminium handles ISI mared anodised (anodic coating not less than grade AC 10 as per IS : 1868) transpaarent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing IS:3564 marked alumminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc. complete (best make of approved quality as per direction of Engineer in-charge.

Painting with synthetic enamel paint one or more coats old work of approved brand and manufacture to give and even shade after cleaning the surface including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the dept. officers

French sprit polishing one or more coats after cleaning the surface including cost and conveyance of all materials and labour charges etc. complete.

Painting with weather proof paint (Ace or equivalent quality) one or more coats on old surface after cleaning the surface etc. including cost and conveyance of all materials and labour charges etc. complete.

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

E K IBRAHIMKUTTY

RANJITH N P

Rajeev C