Supply, erection and commissioning of 04 nos. 60 cs mixed/axial flow VT pump, 06 nos. 325 HP E/Motor, 01 No MCC/LT panel of 2000 ampere at PH- 2 and 4 Loharu canal.

Supply, erection and commissioning of 60Cs.V.T. mixed flow pump of 740 RPM, having static lift of 29 feet, including delivery pipe, delivery bends with support of minimum 8mm thickness with epoxy coating inside & outside including flange welding, nut-bolts, complete in all respect, as per site and as per approved technical specifications. (04 nos. for PH 04 LC)

Supply, erection and commissioning of solid shaft squirrel cage LT 3 phase 415v induction motor for continuous duty, vertical flange mounted of 325 HP of 8 pole, 740 rpm, TEFC Motor of IE (as per IS 12615 with latest amendments) suitable for 60Cs VT Pump complete in all respect and as per approved technical specifications. (04 nos. for PH 04 LC & 02 nos. for PH 02 LC)

Supply, erection and commissioning of Motor Control Centre/LT Panel in control room of pump house of 2000Amp with incomer ACB 4 pole 2000amp with 3 nos outgoings each of having MCCB of 800Amp. along with an additional MCB of 63amp for lighting loads, indicators, relays, meters, push buttons, bus bars and with 3 nos fully Automatic ATS Starters (complete in all respect like relays, indicators timer etc.) of 325HP each with MCCB of 800amp with contactor rating as 700, 550, 400amp with an additional arrangement of ON/OFF switches in front of motor for every starter with designed capacitor bank of 240 KVAR suitable capacity with 8 step APFCR, selector switch, duty contractors, discharge resistors, digital display instruments & other allied accessories for automatic as well as manual operation of capacitor bank suitable for 3nos motors of capacity 325HP & as per design of of Motor Control Centrewith a stand of MS channel (1 feet up from floor) & degree of protection as per IP-54 as per approved technical specifications. (01 nos. for PH 04 LC)