Providing CAD work to LIS Shaheed Kulvinder Singh in GP Rampur Bharapur in Tehsil Paonta Sahib District Sirmour HP

Amount

Excavation in drains and channels etc.in earth work for pipes up to all depths in all classification of earthwork such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft/hard rock or chiseling soft / hard rock where blasting is prohibited in all lifts including jungle clearance wherever required, trimming & dressing of sides, leveling of beds to correct grade including shoring/struting, planking, timbering & dewatering wherever required stacking the useable/unuseable material/soil seperately & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15 cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated soil/unuseable material as directed with in all leads & lifts including restoration of un-metalled surfaces to its original condition & including cost of diversion for traffic, night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with-in all leads & lifts as per directions of the Engineer Incharge

Laying , jointing & testing high density polythylene pipe for use for buried water main and services .The jointing of pipe shall be done by Butt fusion welding which shall confirm to clause 3.2.1.2 of IS-7634 ( part-II)-2012etc. each Pipe shall be BIS marked ( IS-4984-1995 or latest with uptodate ammendments of PE 63 of following nominal & dia of pressure rating complete in respect.

PE-63, PN-2.5 of Following diameters i) 225 mm

iii) 160mm

Providing Fixing of PVC coupled Equal Tee of following dia complete in all respect including all leads lifts and carriage of material and as per the direction of Engineer-in-charge

i) 225x225x110mm Dia at Node 1

ii) 180x180x110mm Dia at Node 1

iii) 160x160x 110mm at Node No. 20,45

iv) 140x140x 110mm Dia at Node 6 & 115

v) 125x125x 110mm Dia at Node 37,47,51 & 63

vi) 110x110x110mm Dia at Node

vii) PVC Nipple 110mm dia.

Providing Fixing of fitting PVC Ball valve of various dia of superior quality complete in all leads lifts and carriage of material and as per the direction of Engineer-in-charge

ii) PVC Ball Valve 225mm dia

ii) PVC Ball Valve 180m m dia

iii) PVC Ball Valve 160mm dia

iv) PVC Ball Valve 140mm dia

v) PVC Ball Valve 125mm dia

vi) PVC Ball Valve 110mm dia.

Providing Fixing of PVC Bends of following dia complete in all respect including all leads lifts and carriage of material and as per the direction of Engineer-in-charge

i) PVC Bends 110mm dia.

Excavation in foundation and trenches etc.in earth work in all kinds of soil such as pick work ,jumper work decomposed conglomerate saturated soil soft and hard rock upto all leads lifts stacking the excavated soil not more than 3mtr.clear from the edge of excavation and then returning the stacked soil in 15cm layers when required in to plinth sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads lifts and as per directions of the Engineer-in-charge

Providing and laying cement concrete 1:2:4(1cement:2sand: 4 graded stone agg.20mm nominal size)and curing complete excluding the cost of form work in foundation & plinth including all leads lifts and carriage of material and as per the directions of Engineer-in-charge.

20mm cement plaster in single coat on rough side of brck masonary for interior plaster upto two evel including arrises, internal rounded angles,chamers and or rounded angles chambfers and or rounded angles not exceeding 80mm in girth and finished even & smooth with cement mortar 1:6(1cement:6sand) and as directed by the Engineer-in-charge.

Providing and fixing PVC EndCap of following dia of approved make with in all leads,lifts and carriage of materials including com,plete in all respect including all leads,lifts and carriage of materials as per direction of the Engineer-in-charge.

i0 180mm dia.

ii) 140mm dia.

iii) 110mm dia.

Himalaya Enterprises

Shamshad Ali Contractor

BHAW SINGH KAPOOR CONTRACTOR